scholarly journals Photocatalytic H2 Production from Naphthalene by Various TiO2 Photocatalysts: Impact of Pt Loading and Formation of Intermediates

Catalysts ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 107
Author(s):  
Osama Al-Madanat ◽  
Yamen AlSalka ◽  
Ralf Dillert ◽  
Detlef Bahnemann

This work presents a comparative study of the efficiency of two commercial TiO2 photocatalysts, Aeroxide P25 (ATiO2) and Sachtleben Hombikat UV100 (HTiO2), in H2 production from an aqueous solution of naphthalene. The TiO2 photocatalysts were platinized by the photodeposition method varying the platinum content of the suspension to 0.5, 1.0, and 5.0 wt%. A full physicochemical characterization for these materials was performed, showing no structural effects from the deposition method, and confirming a well dispersion of nanosized-Pt0 particles on the surface of both photocatalysts. Pristine ATiO2 shows around 14% higher photocatalytic fractional conversion of naphthalene than pristine HTiO2 after 240 min of irradiation, while both materials exhibit negligible activity for H2 formation. The 0.5 wt% Pt- HTiO2 increases the photocatalytic fractional conversion of naphthalene from 71% to 82% and produces 6 µmol of H2. However, using a higher Pt content than the optimal platinization ratio of 0.5 wt% dramatically inhibits both processes. On the other hand, regardless of the fractional ratio of Pt, the platinization of ATiO2 results in a decrease in the fractional conversion of naphthalene by 4% to 33% of the pristine value. Although the presence of Pt islands on the surface of the ATiO2 is essential for the H2 evolution, no dependency between the Pt ratio and the H2 formation rate was observed since all the platinized materials show a similar H2 formation of around 3 µmol. Based on the EPR results, the higher photocatalytic activity of the Pt-HTiO2 is attributed to the efficient charge carrier separation and its larger surface area. The recyclability test confirms that the inhibition of the photocatalytic process is related to the deactivation of the photocatalyst surface by the adsorption of the photoformed intermediates. A strong relationship between the photocatalytic activity and the kind of the aromatic compounds was observed. The H2 evolution and the photooxidation of the aromatic hydrocarbons exhibit higher photonic efficiencies than that of their corresponding hydroxylated compounds over the Pt-HTiO2.

2014 ◽  
Vol 93 ◽  
pp. 190-195 ◽  
Author(s):  
Yong Fei Cui ◽  
Joe Briscoe ◽  
Steve Dunn

We use BaTiO3 as a model photocatalyst to investigate the effect of ferroelectricity on catalytic activity against photocatalytic decolourisation of Acid Black 1. We find that there is a strong relationship between the degree of ferroelectric nature of the BaTiO3 and the catalytic activity. When Ag is photodeposited onto BaTiO3 to produce a modified BaTiO3, the higher tetragonal material content shows the highest photocatalytic efficiency even though there is a reduced surface area due to heat treatment. This change in the performance of the catalyst is associated with improvements in charge carrier separation due to the internal space charge layer formed in a ferroelectric due to the internal dipole.


2020 ◽  
Author(s):  
Parul Verma ◽  
Pallavi Sarkar ◽  
Ashish Singh ◽  
Swapan Pati ◽  
Tapas Maji

Abstract The much-needed renewable alternatives to fossil fuel can be achieved efficiently and sustainably by converting solar energy to solar fuels via hydrogen generation from water or CO2 reduction. In this regard, a soft processable metal-organic hybrid semiconducting material has been developed and studied for photocatalytic activity towards H2 production and CO2 reduction to CO and CH4 under visible light and direct sunlight irradiation. A tetrapodal low molecular weight gelator is synthesized by integrating tetrathiafulvalene and terpyridine through amide linkage (TPY-TTF). The TPY-TTF acts as a linker and by self-assembly with ZnII results in a charge-transfer (CT) coordination polymer gel (CPG); Zn-TPY-TTF. The Zn-TPY-TTF shows impressive photocatalytic activity towards H2 production (rate = 530 μmol g-1h-1) and CO2 reduction to CO (rate = 438 μmol g-1h-1, selectivity >99%) regulated by charge-transfer interaction. Furthermore, in-situ stabilization of Pt nanoparticles to CPG (Pt@Zn-TPY-TTF) exhibits remarkably enhanced H2 evolution (rate =14727 μmol g-1h-1). Importantly, Pt@Zn-TPY-TTF modulate the CO2 reduction from CO to CH4 (rate = 292 μmol g-1h-1, selectivity >97%). Real-time CO2 reduction reaction is monitored by in-situ DRIFT study and subsequent plausible mechanism is derived computationally. The photocatalytic activity of Zn-TPY-TTF and Pt@Zn-TPY-TTF composite was also examined under sunlight that display excellent H2 evolution and CO2 reduction.


2017 ◽  
Vol 7 (16) ◽  
pp. 3531-3538 ◽  
Author(s):  
Xiufang Wang ◽  
Shaohua Chen ◽  
Miaomiao Zhang ◽  
Youyou Huang ◽  
Shaojie Feng ◽  
...  

Uniform heterostructured MoS2 QDs–Ag/PANI composites are fabricated, which exhibit significantly enhanced photocatalytic activity for H2 production under visible light irradiation.


2021 ◽  
Vol 11 (22) ◽  
pp. 10854
Author(s):  
Jingyun Mao ◽  
Huiling Zhong ◽  
Xinpin Liu ◽  
Qingrong Qian ◽  
Yongjin Luo ◽  
...  

The development of a facile method for the synthesis of GaN:ZnO solid solution, an attractive material with a wurtzite-type structure, is vital to enhance its photocatalytic activity toward H2 evolution. Herein, GaN:ZnO solid solution nanorods with diameters of around 180 nm were fabricated by combining the electro-spun method with a sequentially calcinating process. Photocatalytic water-splitting activities of the as-obtained samples loaded with Rh2−yCryO3 co-catalyst were estimated by H2 evolution under visible-light irradiation. The as-prepared GaN:ZnO nanorods at a nitridation temperature of 850 °C showed the optimal performance. Careful characterization of the GaN:ZnO solid solution nanorods indicated that the nitridation temperature is an important parameter affecting the photocatalytic performance, which is related to the specific surface area and the absorbable visible-light wavelength range. Finally, the mechanism of the GaN:ZnO solid solution nanorods was also investigated. The proposed synthesis strategy paves a new way to realize excellent activity and recyclability of GaN:ZnO solid solution nanorod photocatalysts for hydrogen generation.


Author(s):  
Jiangyuan He ◽  
Wei Zhong ◽  
Ying Xu ◽  
Jiajie Fan ◽  
Huogen Yu ◽  
...  

Highly dispersed MoSx nanodots are loaded on the TiO2 surface via a thin-layered carbon supporter to attain a significantly boosted photocatalytic H2-evolution performance by applying a vitamin C-mediated method.


2021 ◽  
Author(s):  
Xiaoluo Bao ◽  
Xiaokun Wang ◽  
Xiangqing Li ◽  
Lixia Qin ◽  
Taiyang Zhang ◽  
...  

It is necessary for the commercialization of sunlight-driven H2 evolution to develop an efficient photocatalytic system whose energy utilization is independent on incident light intensity. Unfortunately, limited attention has been...


Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 817
Author(s):  
Maria Solakidou ◽  
Yiannis Georgiou ◽  
Yiannis Deligiannakis

Noble metal-TiO2 nanohybrids, NM0-TiO2, (NM0 = Pt0, Pd0, Au0, Ag0) have been engineered by One-Nozzle Flame Spray Pyrolysis (ON-FSP) and Double-Nozzle Flame Spray Pyrolysis (DN-FSP), by controlling the method of noble metal deposition to the TiO2 matrix. A comparative screening of the two FSP methods was realized, using the NM0-TiO2 photocatalysts for H2 production from H2O/methanol. The results show that the DN-FSP process allows engineering of more efficient NM0-TiO2 nanophotocatalysts. This is attributed to the better surface-dispersion and narrower size-distribution of the noble metal onto the TiO2 matrix. In addition, DN-FSP process promoted the formation of intraband states in NM0-TiO2, lowering the band-gap of the nanophotocatalysts. Thus, the present study demonstrates that DN-FSP process is a highly efficient technology for fine engineering of photocatalysts, which adds up to the inherent scalability of Flame Spray Pyrolysis towards industrial-scale production of nanophotocatalysts.


1987 ◽  
Vol 120 ◽  
pp. 167-169
Author(s):  
Valerio Pirronello

The problem of the formation of molecular hydrogen in interstellar clouds is revisited. the role played by cosmic ray bombardment under certain circumstances is considered mainly in the light of the low formation rate of H2 on grains due to the reduced mobility of adsorbed H atoms on their amorphous surfaces at interstellar temperatures.


2019 ◽  
Vol 106 ◽  
pp. 116-119 ◽  
Author(s):  
Linghui Sun ◽  
Hanmin Xiao ◽  
Sunan Cong ◽  
Yanjie Hao ◽  
Mengru Xue ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document