scholarly journals A Comparative Study of the Effect of Graphene Oxide, Graphitic Carbon Nitride, and Their Composite on the Photocatalytic Activity of Cu3SnS4

Catalysts ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 14
Author(s):  
Olalekan C. Olatunde ◽  
Damian C. Onwudiwe

Photocatalysis has shown high potential in dealing with the ever-broadening problem of wastewater treatment, escalated by the increasing level of recalcitrant chemicals often referred to as emerging contaminants. In this study, the effect of support material on the photocatalytic activity of copper tin sulfide (Cu3SnS4) nanoparticles for the degradation of tetracycline as an emerging contaminant is presented. Graphene oxide, protonated graphitic carbon nitride, and a composite of graphitic carbon nitride and graphene oxide were explored as support materials for Cu3SnS4 nanoparticles. The nanoparticles were incorporated with the different carbonaceous substrates to afford graphene-supported Cu3SnS4 (GO-CTS), protonated graphitic carbon nitride-supported Cu3SnS4 (PCN-CTS), and graphene oxide/protonated graphitic carbon nitride-supported Cu3SnS4 (GO/PCN-CTS). Physicochemical, structural, and optical properties of the prepared nanocomposites were characterized using techniques such as Fourier transform infra-red spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-Vis near infrared, and fluorescence spectrophotometry. The compositing of the Cu3SnS4 nanoparticles on the support materials was confirmed by the characterization techniques, and the optical properties of the composites were found to be influenced by the nature of the support material. The incorporation of CTS into the support materials resulted in a reduction in band gap energy with evaluated band gaps of 1.65, 1.46, 1.43 eV, and 1.16 eV. The reduction in band gap energy suggests the potential of the composites for enhanced photocatalytic activity. From the photocatalytic study, the degradation efficiency of tetracycline by CTS, PCN-CTS, GO-CTS, and PC/GO-CTS was 74.1, 85.2, 90.9, and 96.5%, respectively. All the composites showed enhanced activity compared to pristine CTS, and the existence of a synergy between GO and PCN when both were employed as support materials was observed. Based on the charge carrier recombination characteristics and the band edge potential calculations from the composites, a possible mechanism of action of each composite was proposed. This study therefore confirms the possibility of modulating the mechanism of action and subsequently the efficiency of semiconductor materials by altering the nature of the support material.

RSC Advances ◽  
2021 ◽  
Vol 11 (56) ◽  
pp. 35147-35155
Author(s):  
Ping Zhao ◽  
Bo Jin ◽  
Jing Yan ◽  
Rufang Peng

Recyclable photocatalysts that can efficiently respond to visible light must be developed for practical application.


Materials ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 1967
Author(s):  
Petr Praus ◽  
Aneta Smýkalová ◽  
Kryštof Foniok

Graphitic carbon nitride (g-C3N4, hereafter abbreviated as CN) was prepared by the heating of melamine (CN-M) and melamine-cyanurate complex (CN-MCA), respectively, in air at 550 °C for 4 h. The specific surface area (SSA) of CN-M and CN-MCA was 12 m2 g−1 and 225 m2g−1 and the content of oxygen was 0.62 wt.% and 1.88 wt.%, respectively. The band gap energy (Eg) of CN-M was 2.64 eV and Eg of CN-MCA was 2.73 eV. The photocatalytic activity of the CN materials was tested by means of the decomposition of antibiotics ofloxacin and ampicillin under LED irradiation of 420 nm. The activity of CN-MCA was higher due to its high SSA, which was determined based on the physisorption of nitrogen. Ofloxacin was decomposed more efficiently than ampicillin in the presence of both photocatalysts.


Sign in / Sign up

Export Citation Format

Share Document