scholarly journals Hydrothermal Synthesis of Pseudocubic Rutile-Type Titania Particles

Ceramics ◽  
2019 ◽  
Vol 2 (1) ◽  
pp. 56-63 ◽  
Author(s):  
Makoto Kobayashi ◽  
Hideki Kato ◽  
Takamichi Miyazaki ◽  
Masato Kakihana
Keyword(s):  
Electron Microscopy ◽  
Hydrothermal Synthesis ◽  
High Energy ◽  
Water Soluble ◽  
High Index ◽  
Electron Diffraction Analysis ◽  
Titanium Complex ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Properties Of Materials

The functional properties of materials depend strongly on their morphologies. Here, the hydrothermal synthesis of rutile-type titania crystals with pseudocubic shapes using a water-soluble titanium complex is reported. This approach does not require extra additives or doping. Transmission electron microscopy and selected-area electron diffraction analysis revealed that they exposed high-index facets, such as {121}, and high-energy facets, such as {001}, which do not usually appear in rutile crystal. In terms of the formation of steps and kinks on pseudocubic rutile and coexisting anatase and brookite nanoparticles, the adsorption of nanoparticles might inhibit crystal growth, resulting in the formation of crystals with uncommon shapes exposing high-index and high-energy facets.

Compliance at the GaSb/GaP Interface by Misfit Dislocations Array

2011 ◽  
Vol 324 ◽  
pp. 85-88
Author(s):  
Salim El Kazzi ◽  
Ludovic Desplanque ◽  
Christophe Coinon ◽  
Yi Wang ◽  
Pierrre Ruterana ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Energy ◽  
Misfit Dislocations ◽  
Initial Growth ◽  
Electron Diffraction Analysis ◽  
High Energy Electron ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron

We study the initial growth of 10 monolayers (MLs) of GaSb on a (001) GaP substrate. Transmission electron microscopy and reflection high energy electron diffraction analysis show that an Sb-rich GaP surface promotes the formation of a 90° misfit dislocation array at the epi-substrate interface. Using atomic force microscopy, we investigate the influence of the growth temperature and the growth rate on the formation and the shape of GaSb islands.

Hydrothermal Synthesis of Luminescent Wollastonite-CePO4 Nanocomposites

2010 ◽  
Vol 92 ◽  
pp. 125-130
Author(s):  
Ming Guo Ma ◽  
Jie Fang Zhu ◽  
Run Cang Sun
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Hydrothermal Synthesis ◽  
Electron Diffraction ◽  
Hydrothermal Method ◽  
Powder Diffraction ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
20 Nm

Luminescent wollastonite-CePO4 nanocomposites have been successfully synthesized using Ca(NO3)2•4H2O, Na2SiO3•9H2O, and CePO4 by hydrothermal method at 200 oC for 24 h. The precursor nanorods with diameters about 20 nm and lengths several micrometers were obtained by hydrothermal treatment, and after calcination at 600 oC for 3h, the precursor nanorods transformed to wollastonite-CePO4 nanocomposites. Considering the experiment result, a possible growth of the precursor nanorods via the rolling mechanism was also proposed. This is the first report about the synthesis of luminescent wollastonite-CePO4 nanocomposites. The products were characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), selected area electron diffraction (SAED), energy-dispersive X-ray spectroscopy (EDS), and photoluminescence (PL).

Effects of High-Energy Ions on Synthetic Quartz

1972 ◽  
Vol 30 ◽  
pp. 544-545
Author(s):  
Joseph J. Comer ◽  
Charles Bergeron ◽  
Lester F. Lowe
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Electron Beam ◽  
High Energy ◽  
Transmission Electron ◽  
Kikuchi Lines ◽  
High Energy Ions ◽  
Diffraction Patterns ◽  
Dauphiné Twinning ◽  
Beam Damage

Using a Van De Graaff Accelerator thinned specimens were subjected to bombardment by 3 MeV N+ ions to fluences ranging from 4x1013 to 2x1016 ions/cm2. They were then examined by transmission electron microscopy and reflection electron diffraction using a 100 KV electron beam.At the lowest fluence of 4x1013 ions/cm2 diffraction patterns of the specimens contained Kikuchi lines which appeared somewhat broader and more diffuse than those obtained on unirradiated material. No damage could be detected by transmission electron microscopy in unannealed specimens. However, Dauphiné twinning was particularly pronounced after heating to 665°C for one hour and cooling to room temperature. The twins, seen in Fig. 1, were often less than .25 μm in size, smaller than those formed in unirradiated material and present in greater number. The results are in agreement with earlier observations on the effect of electron beam damage on Dauphiné twinning.

Transmission Electron Microscopy of Epitaxial silicides grown by ultra high vacuum deposition

1989 ◽  
Vol 47 ◽  
pp. 462-463
Author(s):  
D. Loretto ◽  
J. M. Gibson ◽  
S. M. Yalisove
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Electron Diffraction ◽  
High Vacuum ◽  
High Energy ◽  
Energy Electron ◽  
Ultra High Vacuum ◽  
Ex Situ ◽  
Transmission Electron

The silicides CoSi2 and NiSi2 are both metallic with the fee flourite structure and lattice constants which are close to silicon (1.2% and 0.6% smaller at room temperature respectively) Consequently epitaxial cobalt and nickel disilicide can be grown on silicon. If these layers are formed by ultra high vacuum (UHV) deposition (also known as molecular beam epitaxy or MBE) their thickness can be controlled to within a few monolayers. Such ultrathin metal/silicon systems have many potential applications: for example electronic devices based on ballistic transport. They also provide a model system to study the properties of heterointerfaces. In this work we will discuss results obtained using in situ and ex situ transmission electron microscopy (TEM).In situ TEM is suited to the study of MBE growth for several reasons. It offers high spatial resolution and the ability to penetrate many monolayers of material. This is in contrast to the techniques which are usually employed for in situ measurements in MBE, for example low energy electron diffraction (LEED) and reflection high energy electron diffraction (RHEED), which are both sensitive to only a few monolayers at the surface.

Transmission Electron Microscopy characterization of epitaxial III-V semiconductor thin films grown on Si(100) by ion-assisted deposition

1990 ◽  
Vol 48 (4) ◽  
pp. 686-687
Author(s):  
L. Hultman ◽  
C.-H. Choi ◽  
R. Kaspi ◽  
R. Ai ◽  
S.A. Barnett
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Ion Irradiation ◽  
High Energy ◽  
Nucleation Mechanism ◽  
Layer By Layer ◽  
Extended Defect ◽  
Island Formation ◽  
Si Substrates ◽  
Transmission Electron

III-V semiconductor films nucleate by the Stranski-Krastanov (SK) mechanism on Si substrates. Many of the extended defects present in the films are believed to result from the island formation and coalescence stage of SK growth. We have recently shown that low (-30 eV) energy, high flux (4 ions per deposited atom), Ar ion irradiation during nucleation of III-V semiconductors on Si substrates prolongs the 1ayer-by-layer stage of SK nucleation, leading to a decrease in extended defect densities. Furthermore, the epitaxial temperature was reduced by >100°C due to ion irradiation. The effect of ion bombardment on the nucleation mechanism was explained as being due to ion-induced dissociation of three-dimensional islands and ion-enhanced surface diffusion.For the case of InAs grown at 380°C on Si(100) (11% lattice mismatch), where island formation is expected after ≤ 1 monolayer (ML) during molecular beam epitaxy (MBE), in-situ reflection high-energy electron diffraction (RHEED) showed that 28 eV Ar ion irradiation prolonged the layer-by-layer stage of SK nucleation up to 10 ML. Otherion energies maintained layer-by-layer growth to lesser thicknesses. The ion-induced change in nucleation mechanism resulted in smoother surfaces and improved the crystalline perfection of thicker films as shown by transmission electron microscopy and X-ray rocking curve studies.

scholarly journals Effects of Recycled Fe2O3 Nanofiller on the Structural, Thermal, Mechanical, Dielectric, and Magnetic Properties of PTFE Matrix

Polymers ◽  
2021 ◽  
Vol 13 (14) ◽  
pp. 2332
Author(s):  
Ahmad Mamoun Khamis ◽  
Zulkifly Abbas ◽  
Raba’ah Syahidah Azis ◽  
Ebenezer Ekow Mensah ◽  
Ibrahim Abubakar Alhaji
Keyword(s):  
Electron Microscopy ◽  
High Energy ◽  
Filler Loading ◽  
Complex Permeability ◽  
X Ray Diffraction ◽  
Thermal Expansion Coefficients ◽  
Transmission Electron ◽  
Energy Ball ◽  
Hematite Fe2o3 ◽  
Ptfe Composites

The purpose of this study was to improve the dielectric, magnetic, and thermal properties of polytetrafluoroethylene (PTFE) composites using recycled Fe2O3 (rFe2O3) nanofiller. Hematite (Fe2O3) was recycled from mill scale waste and the particle size was reduced to 11.3 nm after 6 h of high-energy ball milling. Different compositions (5–25 wt %) of rFe2O3 nanoparticles were incorporated as a filler in the PTFE matrix through a hydraulic pressing and sintering method in order to fabricate rFe2O3–PTFE nanocomposites. The microstructure properties of rFe2O3 nanoparticles and the nanocomposites were characterized through X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and high-resolution transmission electron microscopy (HRTEM). The thermal expansion coefficients (CTEs) of the PTFE matrix and nanocomposites were determined using a dilatometer apparatus. The complex permittivity and permeability were measured using rectangular waveguide connected to vector network analyzer (VNA) in the frequency range 8.2–12.4 GHz. The CTE of PTFE matrix decreased from 65.28×10−6/°C to 39.84×10−6/°C when the filler loading increased to 25 wt %. The real (ε′) and imaginary (ε″) parts of permittivity increased with the rFe2O3 loading and reached maximum values of 3.1 and 0.23 at 8 GHz when the filler loading was increased from 5 to 25 wt %. A maximum complex permeability of 1.1−j0.07 was also achieved by 25 wt % nanocomposite at 10 GHz.

scholarly journals Hydrothermal Synthesis, Characterization and Exploration of Photocatalytic Activities of Polyoxometalate: Ni-CoWO4 Nanoparticles

Crystals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 456
Author(s):  
Fahad A. Alharthi ◽  
Hamdah S. Alanazi ◽  
Amjad Abdullah Alsyahi ◽  
Naushad Ahmad
Keyword(s):  
Electron Microscopy ◽  
Hydrothermal Synthesis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Structure Morphology ◽  
Photocatalytic Activities ◽  
Ft Ir ◽  
Photocatalytic Reactions ◽  
Cobalt Tungstate

This study demonstrated the hydrothermal synthesis of bimetallic nickel-cobalt tungstate nanostructures, Ni-CoWO4 (NCW-NPs), and their phase structure, morphology, porosity, and optical properties were examined using X-ray Diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), Scanning electron microscopy- energy dispersive X-ray spectroscopy (SEM-EDS), high resolution Transmission electron microscopy (HR-TEM), Brunauer-Emmett-Teller (BET) and Raman instruments. It was found that as-calcined NCW-NPs have a monoclinic phase with crystal size ~50–60 nm and is mesoporous. It possessed smooth, spherical, and cubic shape microstructures with defined fringe distance (~0.342 nm). The photocatalytic degradation of methylene blue (MB) and rose bengal (RB) dye in the presence of NCW-NPs was evaluated, and about 49.85% of MB in 150 min and 92.28% of RB in 90 min degraded under visible light. In addition, based on the scavenger’s study, the mechanism for photocatalytic reactions is proposed.

Sign in / Sign up

Export Citation Format

Share Document