scholarly journals Comprehensive Treatment of a Skeletal Class III Growing Patient with Alveolar Bone Hypertrophy in the Anterior Mandible Associated with Becker’s Nevus Syndrome: A Case Report

Children ◽  
2021 ◽  
Vol 8 (2) ◽  
pp. 72
Author(s):  
Won-Kyeong Baik ◽  
Sung-Hwan Choi

Becker’s nevus is a relatively common skin lesion with brown hyperpigmentation and hypertrichosis. It may be expressed simultaneously with other cutaneous, muscular, or skeletal defects, such as hypoplasia of the breast or scoliosis, for which the term “Becker’s nevus syndrome” has been proposed. An 8-year-old boy presented with a Becker’s nevus on the right cheek, chin, and upper neck with alveolar bone hypertrophy in the anterior mandible, which led to an anterior crossbite and severe canting of the mandibular anterior teeth. Through orthopedic treatment using a face mask, the anteroposterior jaw relationship was improved. In phase 2 treatment, we corrected the canting of the mandibular anterior teeth with a segmental intrusion of the mandibular anterior right teeth into the hypertrophic alveolar bone area. The facial profile was improved along with acceptable occlusion, and the treatment result was stable at 1 year after the end of the treatment, without any periodontal attachment loss, root resorption of mandibular anterior teeth, or increase in the size of the hypertrophic region. This case report describes the successful comprehensive treatment of a growing patient with skeletal Class III malocclusion and multiple characteristics of Becker’s nevus syndrome.

2020 ◽  
Vol 8 (3) ◽  
pp. 75 ◽  
Author(s):  
Tarek El-Bialy

Adult orthodontic patients with skeletal Class III malocclusion, open bite and bimaxillary dentoalveolar protrusion are complex problems that normally require surgical intervention to correct. This is a report of an adult female with a skeletal Class III jaw relationship; in addition, the patient had anterior open bite and bimaxillary dentoalveolar protrusion. The patient also had three premolars in the lower left quadrant. Treatment involved extracting the extra premolar distal to lower left canine, retraction of lower anterior teeth, closing extraction space and anterior open bite utilizing Invisalign clear aligners. The patient initially changed aligners every week before this was changed to 3–5 days after starting to use a high frequency vibration (HFV = 120 Hz) device. Satisfactory results were achieved in a relatively shorter period. Comparing before and after treatment cone beam computed tomography revealed that new bone has been formed labial to the lower incisors after their retraction/correction of their initial proclined position and the use of HFV and myofunctional therapy without gingival graft. The present case report shows the comprehensive multidisciplinary team approach in treatment for such cases and the advantage of using HFV to improve bone formation.


2019 ◽  
Vol 7 (24) ◽  
pp. 4189-4193
Author(s):  
Viet Anh Nguyen ◽  
Nguyen Vu Thai Lien ◽  
Vu Thi Nga

BACKGROUND: After levelling and alignment in skeletal Class III patients with upper anterior crowding, the upper incisors usually have excessive proclination. In these cases, the upper incisors’ axial proclination need to be reduced to improve esthetics. CASE REPORT: This case report presents an invisible orthodontic treatment of a 24-year-old adult female patient with skeletal Class III relationship, anterior crossbite, proclined upper incisors, and reduced incisor showing. Patients denied extraction and interproximal reduction. With multi-slotted lingual brackets and straight archwires, we applied lingual crown torque to upper anterior teeth to reduce axial proclination. The resulting uprighted position of upper incisors led to increased incisor showing. A good smile and stable occlusion were obtained after 15 months of active treatment. CONCLUSION: The use of lingual brackets to apply lingual crown torque helps to reduce axial proclination and increasing upper incisor showing without interproximal reduction nor extraction in skeletal Class III patients with upper anterior crowding.


2021 ◽  
Vol 32 (3) ◽  
pp. 120
Author(s):  
William Suryajaya ◽  
Haru Setyo Anggani

Pendahuluan: Perawatan ortodonti kamuflase adalah perawatan untuk menyamarkan diskrepansi skeletal dengan mengubah posisi dan angulasi gigi-gigi pada lengkung rahang. Perawatan tersebut merupakan perawatan yang dapat dipilih selain bedah ortognatik bagi kasus maloklusi skeletal kelas III pada pasien dewasa. Maloklusi skeletal kelas III sering pula disertai dengan keadaan lain seperti gigitan terbuka anterior yang menambah kompleksitas modalitas perawatan. Tujuan laporan kasus ini untuk menjelaskan pilihan modalitas perawatan pasien maloklusi skeletal kelas III secara kamuflase ortodonti. Laporan kasus: Pasien wanita usia 19 tahun 2 bulan datang ke klinik Ortodonti RSGM FKG UI dengan keluhan gigi atas depan tidak teratur dan gigi depan atas dan bawah tidak bertemu. Diagnosis menunjukkan pola skeletal kelas III dengan posisi maksila dan mandibula terhadap basis cranii retrognati (SNA 73°, SNB 74°, ANB -1°)  disertai dengan crowding sedang dan gigitan terbuka anterior. Tipe wajah pasien dolikofasial, simetris dan seimbang. Profil jaringan lunak dan skeletal cekung. Kasus ini dirawat dengan pendekatan ortodonti kamuflase tanpa pencabutan menggunakan piranti cekat standar Edgewise untuk mengoreksi crowding pada lengkung gigi atas dan bawah serta gigitan terbuka pada regio anterior. Perawatan ortodonti selesai dalam waktu 13 bulan dan crowding pada lengkung gigi atas dan bawah serta gigitan terbuka pada regio anterior telah terkoreksi. Simpulan: Perawatan ortodonti kamuflase pada maloklusi kelas III skeletal dengan gigitan terbuka anterior ringan merupakan pilihan perawatan yang cukup baik karena dapat mengoreksi maloklusi dengan kompensasi dentoalveolar sehingga diperoleh oklusi yang baik dan stabil. Hasil perawatan menunjukan hasil yang cukup baik dan dapat diterima oleh pasien.Kata kunci: Maloklusi skeletal kelas III, crowding, open-bite anterior, standar edgewise, ortodonti kamuflase. ABSTRACTIntroduction: Orthodontic camouflage is a treatment to disguise skeletal discrepancies by changing the teeth position and angulation in the jaw arch. This treatment is an option other than orthognathic surgery for skeletal class III malocclusion in adult patients. Skeletal class III malocclusion is often accompanied by other conditions such as an anterior open-bite which adds the complexity of the treatment modality. This case report was aimed to describe the choice of treatment modality for skeletal class III malocclusion patients by orthodontic camouflage. Case report: A female patient aged 19 years and two months came to the Orthodontic Clinics at the Faculty of Dentistry of University of Indonesia Dental Hospital (RSGM FKG UI) with complaints of irregular maxillary anterior teeth, and the maxillary and mandibular anterior teeth did not overlap. The diagnosis showed a skeletal class III pattern with the maxillary and mandibular position against the retrognathic cranii base (SNA 73°, SNB 74°, ANB -1°) accompanied by moderate crowding and anterior open-bite. The patient’s face type is dolichofacial, symmetrical and balanced, with the concave soft and skeletal tissue profiles. This case was treated with a non-extraction camouflage orthodontic approach using the standard edgewise fixed appliance to correct crowding in the maxillary and mandibular dental arches and open-bite in the anterior region. The orthodontic treatment was completed within 13 months, and crowding in the maxillary and mandibular dental arches and open-bite in the anterior region were corrected. Conclusion: Camouflage orthodontic treatment is a good treatment option for skeletal class III malocclusion with a mild anterior open-bite because it can correct malocclusion with dentoalveolar compensation to obtain a good and stable occlusion. The treatment results show good results and can be accepted well by the patient.Keywords: Skeletal class III malocclusion, crowding, anterior open-bite, standard edgewise, orthodontic camouflage.


2020 ◽  
Vol 10 (1) ◽  
pp. 1-11
Author(s):  
So-Hyun Kim ◽  
Nam-Ki Lee ◽  
Young-Kyun Kim ◽  
Tae-Hyun Choi

Author(s):  
Vo Truong Nhu Ngoc ◽  
Nguyen Thi Thu Phuong ◽  
Nguyen Viet Anh

A skeletal Class III malocclusion with open bite tendency is considered very difficult to treat orthodontically without surgery. This case report describes the lingual orthodontic treatment of an adult skeletal Class III patient with mandibular deviation to the left side, lateral open bite, unilateral posterior crossbite, zero overbite and negative overjet. The lower incisors were already retroclined to compensate with the skeletal discrepancy. The patient was treated by asymmetric molar extraction in the mandibular arch to retract the lower incisors and correct the dental midline, with the help of intermaxillary elastics. Lingual appliance was used with over-torqued lower anterior teeth’s brackets to control the torque of mandibular incisors. After a 30-month treatment, satisfactory smile and facial esthetics and good occlusion was achieved. A 12-month follow-up confirmed that the outcome was stable. Asymmetric molar extraction could be a viable option to retract mandibular incisors in Class III malocclusion with lower dental midline deviation.


2018 ◽  
Vol 1 (2) ◽  
pp. 93
Author(s):  
Fidiyah Inayati ◽  
I Gusti Aju Wahju Ardani

Background: Patients with congenital absence of a mandibular lateral incisor are often found having difficulty in achieving adequate functional occlusion. It may affect esthetics, mastication, speech, and occlusal balance. Purpose: This paper reported an agenesis treatment of one mandibular lateral incisor case using a space closure method. Case: A twenty-three years old female patient with agenesis of tooth 42, mandibular anterior crowding, multiple diastema on mandibular anterior teeth, and skeletal class III malocclusion. Case Management: Space closure method was chosen to correct the agenesis by considering the class III skeletal malocclusion and multiple diastema condition. Conclusion: Space closure method treatment improved the patient’s facial and dental esthetics, and it provided a good functional occlusion, despite the absence of a mandibular lateral incisor, which generally impairs the adequate incisal guidance.


2021 ◽  
Vol 10 (34) ◽  
pp. 2954-2959
Author(s):  
Shilpa Venkatesh Pharande

The Alt-RAMEC protocol was introduced by Liou in the year 2005. It allows for sutural mobilisation by opening and closing the RME screw for 7-9 weeks. Maxillary protraction after the use of Alt-Ramec (alternate rapid maxillary expansion and contraction) protocol is an efficient method for early treatment of skeletal Class III malocclusion. This case report shows the results of using a hyrax bonded maxillary expander with the Alt-RAMEC protocol to treat a maxillary hypoplasia Class III malocclusion. A 12-year-old patient with skeletal class III malocclusion with anterior as well as the unilateral posterior crossbite was treated using this protocol. CBCT scans were taken before and after expansion. These CBCT scans were used for assessing and analysing the skeletal changes that have occurred after using the AltRamec protocol. The objective of this case report is to assess skeletal changes after using the Alt-RAMEC protocol.


Sign in / Sign up

Export Citation Format

Share Document