scholarly journals New Technique to Improve the Ductility of Steel Beam to Column Bolted Connections: A Numerical Investigation

CivilEng ◽  
2021 ◽  
Vol 2 (4) ◽  
pp. 929-942
Author(s):  
Mohamed A. Shaheen ◽  
Mohamed Ahmed Galal ◽  
Lee S. Cunningham ◽  
Andrew S. J. Foster
Keyword(s):  
Element Model ◽  
Elastic Response ◽  
Steel Beam ◽  
Ultimate Capacity ◽  
Load Path ◽  
End Plate ◽  
Novel Method ◽  
Plate Connections ◽  
Steel Sleeve ◽  
Elastic Design

A novel method to improve the robustness of steel end plate connections is presented in this paper. Existing commonly adopted techniques alter the stiffness of the beam or the end plate to improve the connection’s robustness. In this study, the robustness is enhanced by improving the contribution of the bolts to the rotational capacity of connections; the higher the bolts’ elongation, the higher the rotational capacity that can be achieved. However, the brittleness of the bolt material, combined with its small length, results in negligible elongation. Alternatively, the load path between the end plate and the bolts can be interrupted with a ductile element to achieve the required elongation. This can be achieved by inserting a steel sleeve with a designated length, thickness, and wall curvature between the end plate and the washer. The proposed sleeve should be designed so that its ultimate capacity is less than the force in the bolt at failure; accordingly, the sleeve develops a severe bending deformation before the failure of any connection components. Using a validated finite element model, end plate connections with various parameters are numerically investigated to understand the performance of the sleeve device. The proposed system substantially enhances the rotational capacity of the connections, ranging between 1.37 and 2.46 times that of the standard connection. It is also concluded that the sleeved connections exhibit a consistent elastic response with the standard connections, indicating the proposed system is compatible with codified elastic design approaches without modification. Furthermore, for a specific connection, various ductile responses can be achieved without altering the connection capacity nor configuration.

Semi-Rigid Analysis of Extended End Plate Connections Based on Correlation and Sensitivity

2010 ◽  
Vol 34-35 ◽  
pp. 197-201
Author(s):  
Jian Rong Pan ◽  
Zhan Wang ◽  
Cheng Su ◽  
Lei Wang
Keyword(s):  
Partial Correlation ◽  
Numerical Study ◽  
Steel Beam ◽  
Element Analysis ◽  
End Plate ◽  
The Finite Element Analysis ◽  
Extended End Plate ◽  
Plate Connections ◽  
Sensitive Parameters ◽  
The Relationship

In traditional semi-rigid analysis of extended end plate connections is assumed to be deterministic parameters, most of moment-rotation models of the joint is determined by curve-fitting and statistically regressed with the test data. Those parameters of the models have little physical meanings and the effect of correlations between parameters is neglected. This paper deals with a semi-rigid joint of extended end plate connections based on correlation and sensitivity analysis. A numerical study was carried out and the finite element analysis was validated compared with the experimental results.The relative moment-rotation model was concluded based on correlations in parameters and probabilistic sentivity analysis. The relationship between height and width of steel beam was partial correlation, the relationship between thickness of steel beam flange and thickness of steel beam web was partial correlation. Height and width of steel beam, the distance of upper bolts to axle wire of steel beam were important sensitive parameters for the extended end plate connections.

Three-dimensional numerical and linearly distributed multi-parameter fitted analytical modeling of hybrid beam–column with partially welded flush end-plate connection

2018 ◽  
Vol 21 (12) ◽  
pp. 1777-1791
Author(s):  
Joma HM Omer ◽  
Ahmad BH Kueh ◽  
Poi-Ngian Shek
Keyword(s):  
Finite Element ◽  
Three Dimensional ◽  
Element Model ◽  
Flexural Behavior ◽  
Major Influence ◽  
End Plate ◽  
Hybrid Beams ◽  
Plate Connections ◽  
Plate Connection ◽  
Three Dimensional Finite Element

The flexural behavior of partially welded flush end-plate connections incorporating built-up hybrid beams and columns is analytically and numerically investigated. An experimentally obeying three-dimensional finite element model is first constructed. To circumvent the laborious effort of three-dimensional simulation and experimental work, a new experimentally and numerically complying equation approach is introduced for the construction of a continuous moment–rotation ( M–θ) description. For the proposed equation, two essential terms are required: the rotational stiffness, Sj,ini, obtained by employing the component method and the maximum moment, Mmax, produced using the proposed linearly distributed multi-parameter fitting technique. To demonstrate the applicability of the proposed equation, a variation in the geometric configuration of connections within the practical range is considered. Excellent agreement is noted when comparing all M–θ relationships produced by the proposed equation to those by the finite element method and experiments. In addition, the stress distribution and main deformation modes are numerically obtained, where the ranking of stress criticality is offered for all structural parts. The depth, width, flange, and web thicknesses, as well as the yield stress of the beam, have a major influence on Mmax, as predicted by the proposed equation. Also, bolts have been identified as the most critically stressed component.

scholarly journals Analysis of the Behaviour of Semi Rigid Steel End Plate Connections

2018 ◽  
Vol 149 ◽  
pp. 02058
Author(s):  
A. Bahaz ◽  
S. Amara ◽  
J.P. Jaspart ◽  
J.F. Demonceau
Keyword(s):  
Finite Element ◽  
Plate Thickness ◽  
Three Dimensional ◽  
Element Model ◽  
Rotational Behaviour ◽  
Building Structures ◽  
Element Analysis ◽  
End Plate ◽  
Plate Connections ◽  
Three Dimensional Finite Element

The analysis of steel-framed building structures with full strength beam to column joints is quite standard nowadays. Buildings utilizing such framing systems are widely used in design practice. However, there is a growing recognition of significant benefits in designing joints as partial strength/semi-rigid. The design of joints within this partial strength/semi-rigid approach is becoming more and more popular. This requires the knowledge of the full nonlinear moment-rotation behaviour of the joint, which is also a design parameter. The rotational behaviour of steel semi rigid connections can be studied using the finite element method for the following three reasons: i) such models are inexpensive; ii) they allow the understanding of local effects, which are difficult to measure accurately physically, and iii) they can be used to generate extensive parametric studies. This paper presents a three-dimensional finite element model using ABAQUS software in order to identify the effect of different parameters on the behaviour of semi rigid steel beam to column end plate connections. Contact and sliding between different elements, bolt pretension and geometric and material non-linearity are included in this model. A parametric study is conducted using a model of two end-plate configurations: flush and extended end plates. The studied parameters were as follows: bolts type, end plate thickness and column web stiffener. Then, the model was calibrated and validated with experimental results taken from the literature and with the model proposed by Eurocode3. The procedure for determining the moment–rotation curve using finite element analysis is also given together with a brief explanation of how the design moment resistance and the initial rotational stiffness of the joint are obtained.

scholarly journals Analysis of the Mechanical Behavior of Bolted Beam-Column Connections with Different Structural Forms

2019 ◽  
Vol 2019 ◽  
pp. 1-11 ◽  
Author(s):  
Rongqian Yang ◽  
Xuejun Zhou
Keyword(s):  
Finite Element ◽  
Mechanical Behavior ◽  
Simulation Analysis ◽  
Element Model ◽  
Hysteretic Behavior ◽  
Load Bearing ◽  
End Plate ◽  
Extended End Plate ◽  
Plate Connections ◽  
Plate Connection

In order to study the mechanical behavior of bolted beam-column connections, the accuracy and applicability of the finite element model were firstly validated according to the published experiments on end-plate connections using ABAQUS. Then, in order to discuss the mechanical behavior of connections, three semirigid connections which are convenient for prefabricated construction, including top-and-seat angle connections with web and ear plate, extended end-plate connection, and T-stub connection, were examined using numerical simulation analysis to study and compare their capacity, hysteretic behavior, ductility, and degradation characteristics in detail. The results showed that the finite element models that were built could effectively simulate the load bearing behavior of bolted connections under both single-direction loading and cyclic loading. The three connections showed good load bearing capacity. The connectors significantly affected the energy dissipation capacity under load. The extended end-plate connection demonstrated the best performance in both mechanical behavior and manufacture and installation, so it would therefore be the preferred option.

Numerical studies on the structural behaviour of composite end-plate connections

2010 ◽  
Vol 37 (6) ◽  
pp. 907-921 ◽  
Author(s):  
Aaron J. Wang
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Three Dimensional ◽  
Element Model ◽  
Structural Behaviour ◽  
Analysis And Design ◽  
Shear Connectors ◽  
End Plate ◽  
Plate Connections ◽  
Plate Connection

A three-dimensional (3-D) finite element model is established to predict the structural behaviour of composite end-plate connections with full incorporation of material and geometrical nonlinearities. A two-dimensional (2-D) finite element model is also proposed as a tool for a comprehensive parametric study, analysis, and design. The accuracy of both the models is verified by comparing the numerical results with those from tests and a design model. Various important structural behaviours of composite end-plate connection are also studied through the numerical and analytical simulations. These models are regarded as effective tools for conducting performance-based design of composite connections and semi-continuous beams with reasonable consideration of nonlinear deformation characteristics of both tensile reinforcements and shear connectors.

Bearing Capacity Analysis on Improved Slotted End Plate Connections

2012 ◽  
Vol 193-194 ◽  
pp. 958-963
Author(s):  
Hong Wan ◽  
Yi Liang Peng ◽  
Jun Fen Yang ◽  
Ruo Hui Qiang
Keyword(s):  
Finite Element ◽  
Bearing Capacity ◽  
Failure Modes ◽  
Ultimate Load ◽  
Element Model ◽  
Vertical Displacement ◽  
Mechanical Behaviors ◽  
Finite Element Software ◽  
End Plate ◽  
Plate Connections

Full-scale of U-type and grooved-type slotted end plate (SEP) connections are tested to determine their failure modes and damage mechanisms under ultimate loading. Simulate on mechanical behaviors of U-type and grooved-type SEP connections under compression using finite element software ANSYS based on the experimental research. Obtain load-vertical displacement curves of the SEP connections, and compare with the experimental results to determine the validity of the model. On this basis, this paper provide the improved SEP connections, and contrast with the U-type and grooved-type SEP connections. The results indicate that finite element results are in good agreement with experimental data. Difference of the ultimate load between the test specimen and finite element model is less than 10%. The finite element can simulate mechanical behaviors of the SEP connections better. The ultimate bearing capacity of the UC-type SEP connected joints is significantly higher than the U-type and grooved-type, which shows the improved SEP Connections is reasonable and effective. SEP is the main factor of the U-type and grooved-type SEP Connections’ ultimate load, tube is controlling factor of the UC-type SEP connected joints.

Sign in / Sign up

Export Citation Format

Share Document