scholarly journals Atmospheric Correction of Thermal Infrared Landsat Images Using High-Resolution Vertical Profiles Simulated by WRF Model

2021 ◽  
Vol 8 (1) ◽  
pp. 27
Author(s):  
Lucas Ribeiro Diaz ◽  
Daniel Caetano Santos ◽  
Pâmela Suélen Käfer ◽  
Nájila Souza da Rocha ◽  
Savannah Tâmara Lemos da Costa ◽  
...  
Keyword(s):  
Remote Sensing ◽  
High Resolution ◽  
Single Channel ◽  
Atmospheric Correction ◽  
Wrf Model ◽  
Thermal Infrared ◽  
Atmospheric Effects ◽  
Landsat 8 ◽  
Vertical Profiles

Atmospheric profiles are key inputs in correcting the atmospheric effects of thermal infrared (TIR) remote sensing data for estimating land surface temperature (LST). This study is a first insight into the feasibility of using the weather research and forecasting (WRF) model to provide high-resolution vertical profiles for LST retrieval. WRF numerical simulations were performed to downscaling NCEP climate forecast system version 2 (CFSv2) reanalysis profiles, using two nested grids with horizontal resolutions of 12 km (G12) and 3 km (G03). We investigated the use of these profiles in the atmospheric correction of TIR data applying the radiative transfer equation (RTE) inversion single-channel approach. The MODerate resolution atmospheric TRANsmission (MODTRAN) model and Landsat 8 TIRS10 (10.6–11.2 µm) band were taken for the method application. The accuracy evaluation was performed using in situ radiosondes in Southern Brazil. We included in the comparative analysis the atmospheric correction parameter calculator (ACPC; NASA) web tool and profiles directly from the NCEP CFSv2 reanalysis. The atmospheric correction parameters from ACPC, followed by CFSv2, had better agreement with the ones calculated using in situ radiosondes. When applied into the RTE to retrieve LST, the best results (RMSE) were, in descending order: CSFv2 (0.55 K), ACPC (0.56 K), WRF G12 (0.79 K), and WRF G03 (0.82 K). The findings suggest that increasing the horizontal resolution of reanalysis profiles does not particularly improve the accuracy of RTE-based LST retrieval. However, the WRF results are yet satisfactory and promising, encouraging further assessments. We endorse the use of the well-known ACPC and also recommend the NCEP CFSv2 reanalysis profiles for TIR remote sensing atmospheric correction and LST single-channel retrieval.

scholarly journals Land Surface Temperature Retrieval Using High-Resolution Vertical Profiles Simulated by WRF Model

Atmosphere ◽  
2021 ◽  
Vol 12 (11) ◽  
pp. 1436
Author(s):  
Lucas Ribeiro Diaz ◽  
Daniel Caetano Santos ◽  
Pâmela Suélen Käfer ◽  
Nájila Souza da Rocha ◽  
Savannah Tâmara Lemos da Costa ◽  
...  
Keyword(s):  
High Resolution ◽  
Surface Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Atmospheric Correction ◽  
Wrf Model ◽  
Landsat 8 ◽  
Accuracy Evaluation ◽  
Vertical Profiles ◽  
Radiosonde Station

This work gives a first insight into the potential of the Weather Research and Forecasting (WRF) model to provide high-resolution vertical profiles for land surface temperature (LST) retrieval from thermal infrared (TIR) remote sensing. WRF numerical simulations were conducted to downscale NCEP Climate Forecast System Version 2 (CFSv2) reanalysis profiles, using two nested grids with horizontal resolutions of 12 km (G12) and 3 km (G03). We investigated the utility of these profiles for the atmospheric correction of TIR data and LST estimation, using the moderate resolution atmospheric transmission (MODTRAN) model and the Landsat 8 TIRS10 band. The accuracy evaluation was performed using 27 clear-sky cases over a radiosonde station in Southern Brazil. We included in the comparative analysis NASA’s Atmospheric Correction Parameter Calculator (ACPC) web-tool and profiles obtained directly from the NCEP CFSv2 reanalysis. The atmospheric parameters from ACPC, followed by those from CFSv2, were in better agreement with parameters calculated using in situ radiosondes. When applied into the radiative transfer equation (RTE) to retrieve LST, the best results (RMSE) were, in descending order: CFSv2 (0.55 K), ACPC (0.56 K), WRF G12 (0.79 K), and WRF G03 (0.82 K). Our findings suggest that there is no special need to increase the horizontal resolution of reanalysis profiles aiming at RTE-based LST retrieval. However, the WRF results were still satisfactory and promising, encouraging further assessments. We endorse the use of the well-known ACPC and recommend the NCEP CFSv2 profiles for TIR atmospheric correction and LST single-channel retrieval.

scholarly journals Retrieving Total and Inorganic Suspended Sediments in Amazon Floodplain Lakes: A Multisensor Approach

2019 ◽  
Vol 11 (15) ◽  
pp. 1744 ◽  
Author(s):  
Daniel Maciel ◽  
Evlyn Novo ◽  
Lino Sander de Carvalho ◽  
Cláudio Barbosa ◽  
Rogério Flores Júnior ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Atmospheric Correction ◽  
Suspended Sediments ◽  
Floodplain Lakes ◽  
Empirical Modeling ◽  
Landsat 8 ◽  
Amazon Floodplain ◽  
The Impact ◽  
Sentinel 2

Remote sensing imagery are fundamental to increasing the knowledge about sediment dynamics in the middle-lower Amazon floodplains. Moreover, they can help to understand both how climate change and how land use and land cover changes impact the sediment exchange between the Amazon River and floodplain lakes in this important and complex ecosystem. This study investigates the suitability of Landsat-8 and Sentinel-2 spectral characteristics in retrieving total (TSS) and inorganic (TSI) suspended sediments on a set of Amazon floodplain lakes in the middle-lower Amazon basin using in situ Remote Sensing Reflectance (Rrs) measurements to simulate Landsat 8/OLI (Operational Land Imager) and Sentinel 2/MSI (Multispectral Instrument) bands and to calibrate/validate several TSS and TSI empirical algorithms. The calibration was based on the Monte Carlo Simulation carried out for the following datasets: (1) All-Dataset, consisting of all the data acquired during four field campaigns at five lakes spread over the lower Amazon floodplain (n = 94); (2) Campaign-Dataset including samples acquired in a specific hydrograph phase (season) in all lakes. As sample size varied from one season to the other, n varied from 18 to 31; (3) Lake-Dataset including samples acquired in all seasons at a given lake with n also varying from 17 to 67 for each lake. The calibrated models were, then, applied to OLI and MSI scenes acquired in August 2017. The performance of three atmospheric correction algorithms was also assessed for both OLI (6S, ACOLITE, and L8SR) and MSI (6S, ACOLITE, and Sen2Cor) images. The impact of glint correction on atmosphere-corrected image performance was assessed against in situ glint-corrected Rrs measurements. After glint correction, the L8SR and 6S atmospheric correction performed better with the OLI and MSI sensors, respectively (Mean Absolute Percentage Error (MAPE) = 16.68% and 14.38%) considering the entire set of bands. However, for a given single band, different methods have different performances. The validated TSI and TSS satellite estimates showed that both in situ TSI and TSS algorithms provided reliable estimates, having the best results for the green OLI band (561 nm) and MSI red-edge band (705 nm) (MAPE < 21%). Moreover, the findings indicate that the OLI and MSI models provided similar errors, which support the use of both sensors as a virtual constellation for the TSS and TSI estimate over an Amazon floodplain. These results demonstrate the applicability of the calibration/validation techniques developed for the empirical modeling of suspended sediments in lower Amazon floodplain lakes using medium-resolution sensors.

Surface temperature and radiation budget of snow-covered complex terrains

2021 ◽  
Author(s):  
Alvaro Robledano ◽  
Ghislain Picard ◽  
Laurent Arnaud ◽  
Fanny Larue ◽  
Inès Ollivier
Keyword(s):  
Surface Temperature ◽  
Single Channel ◽  
Spatial Variations ◽  
In Situ Measurements ◽  
Surface Energy Budget ◽  
Radiation Budget ◽  
Atmospheric Effects ◽  
Landsat 8 ◽  
The Impact

&lt;p&gt;The temporal evolution of the snowpack is controlled by the surface temperature, which plays a key role in physical processes such as snowmelt. It shows large spatial variations in mountainous areas, where the illumination conditions are variable and depend on the topography. The surface energy budget is affected by the particular processes that occur in these areas, such as the modulation of the illumination by local slope and the re-illumination of the surface from surrounding slopes. These topography effects are often neglected in models, considering the surface as flat and smooth. Here we aim at estimating the surface temperature and the radiation budget of snow-covered complex terrains, in order to evaluate the role of the different processes that control their spatial variations. For this, a modelling chain is implemented to derive surface temperature from in-situ measurements. The main component is the Rough Surface Ray-Tracing (RSRT) model, based on a photon transport algorithm to quantify the impact of surface roughness in snow-covered areas. It is coupled to a surface scheme in order to estimate the radiation budget. To validate the model, we use in-situ measurements and satellite thermal observations (TIRS sensor aboard Landsat-8) in the Col du Lautaret area, in the French Alps. The satellite images are corrected from atmospheric effects with a single-channel algorithm. The results of the simulations show (i) an agreement between the simulated and observed surface temperature for a diurnal cycle in winter; (ii) the spatial variations of surface temperature are on the order of 5 to 10&amp;#176;C between opposed slope orientations; (iii) the agreement with satellite observations is improved when considering topography effects. It is therefore necessary to account for these effects to estimate the spatial variations of the radiation budget and surface temperature over snow-covered complex terrain.&amp;#160;&lt;/p&gt;

scholarly journals Comparison of In Situ and Remote-Sensing Methods to Determine Turbidity and Concentration of Suspended Matter in the Estuary Zone of the Mzymta River, Black Sea

2021 ◽  
Vol 13 (1) ◽  
pp. 143
Author(s):  
Ksenia Nazirova ◽  
Yana Alferyeva ◽  
Olga Lavrova ◽  
Yuri Shur ◽  
Dmitry Soloviev ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Black Sea ◽  
Atmospheric Correction ◽  
Landsat 8 ◽  
Suspended Particulate Matter Concentration ◽  
Water Sampling ◽  
Study Region ◽  
Sentinel 2A ◽  
Remote Sensing Methods

The paper presents the results of a comparison of water turbidity and suspended particulate matter concentration (SPM) obtained from quasi-synchronous in situ and satellite remote-sensing data. Field measurements from a small boat were performed in April and May 2019, in the northeastern part of the Black Sea, in the mouth area of the Mzymta River. The measuring instruments and methods included a turbidity sensor mounted on a CTD (Conductivity, Temperature, Depth), probe, a portable turbidimeter, water sampling for further laboratory analysis and collecting meteorological information from boat and ground-based weather stations. Remote-sensing methods included turbidity and SPM estimation using the C2RCC (Case 2 Regional Coast Color) and Atmospheric correction for OLI ‘lite’ (ACOLITE) ACOLITE processors that were run on Landsat-8 Operational Land Imager (OLI) and Sentinel-2A/2B Multispectral Instrument (MSI) satellite data. The highest correlation between the satellite SPM and the water sampling SPM for the study area in conditions of spring flooding was achieved using C2RCC, but only for measurements undertaken almost synchronously with satellite imaging because of the high mobility of the Mzymta plume. Within the few hours when all the stations were completed, its boundary could shift considerably. The ACOLITE algorithms overestimated by 1.5 times the water sampling SPM in the low value range up to 15 g/m3. For SPM over 20–25 g/m3, a high correlation was observed both with the in situ measurements and the C2RCC results. It was demonstrated that quantitative turbidity and SPM values retrieved from Landsat-8 OLI and Sentinel-2A/2B MSI data can adequately reflect the real situation even using standard retrieval algorithms, not regional ones, provided the best suited algorithm is selected for the study region.

scholarly journals Validation of Space-Based Albedo Products from Upscaled Tower-Based Measurements Over Heterogeneous and Homogeneous Landscapes

2020 ◽  
Vol 12 (5) ◽  
pp. 833
Author(s):  
Rui Song ◽  
Jan-Peter Muller ◽  
Said Kharbouche ◽  
Feng Yin ◽  
William Woodgate ◽  
...  
Keyword(s):  
High Resolution ◽  
Surface Albedo ◽  
Spatial Scales ◽  
Atmospheric Correction ◽  
Landsat 8 ◽  
Surface Reflectance ◽  
Hemispherical Reflectance ◽  
Land Surfaces ◽  
Sentinel 2

Surface albedo is a fundamental radiative parameter as it controls the Earth’s energy budget and directly affects the Earth’s climate. Satellite observations have long been used to capture the temporal and spatial variations of surface albedo because of their continuous global coverage. However, space-based albedo products are often affected by errors in the atmospheric correction, multi-angular bi-directional reflectance distribution function (BRDF) modelling, as well as spectral conversions. To validate space-based albedo products, an in situ tower albedometer is often used to provide continuous “ground truth” measurements of surface albedo over an extended area. Since space-based albedo and tower-measured albedo are produced at different spatial scales, they can be directly compared only for specific homogeneous land surfaces. However, most land surfaces are inherently heterogeneous with surface properties that vary over a wide range of spatial scales. In this work, tower-measured albedo products, including both directional hemispherical reflectance (DHR) and bi-hemispherical reflectance (BHR), are upscaled to coarse satellite spatial resolutions using a new method. This strategy uses high-resolution satellite derived surface albedos to fill the gaps between the albedometer’s field-of-view (FoV) and coarse satellite scales. The high-resolution surface albedo is generated from a combination of surface reflectance retrieved from high-resolution Earth Observation (HR-EO) data and moderate resolution imaging spectroradiometer (MODIS) BRDF climatology over a larger area. We implemented a recently developed atmospheric correction method, the Sensor Invariant Atmospheric Correction (SIAC), to retrieve surface reflectance from HR-EO (e.g., Sentinel-2 and Landsat-8) top-of-atmosphere (TOA) reflectance measurements. This SIAC processing provides an estimated uncertainty for the retrieved surface spectral reflectance at the HR-EO pixel level and shows excellent agreement with the standard Landsat 8 Surface Reflectance Code (LaSRC) in retrieving Landsat-8 surface reflectance. Atmospheric correction of Sentinel-2 data is vastly improved by SIAC when compared against the use of in situ AErosol RObotic NETwork (AERONET) data. Based on this, we can trace the uncertainty of tower-measured albedo during its propagation through high-resolution EO measurements up to coarse satellite scales. These upscaled albedo products can then be compared with space-based albedo products over heterogeneous land surfaces. In this study, both tower-measured albedo and upscaled albedo products are examined at Ground Based Observation for Validation (GbOV) stations (https://land.copernicus.eu/global/gbov/), and used to compare with satellite observations, including Copernicus Global Land Service (CGLS) based on ProbaV and VEGETATION 2 data, MODIS and multi-angle imaging spectroradiometer (MISR).

scholarly journals MODELLING BIOPHYSICAL PARAMETERS OF MAIZE USING LANDSAT 8 TIME SERIES

2016 ◽  
Vol XLI-B2 ◽  
pp. 171-175
Author(s):  
Thorsten Dahms ◽  
Sylvia Seissiger ◽  
Christopher Conrad ◽  
Erik Borg
Keyword(s):  
Machine Learning ◽  
Remote Sensing ◽  
High Resolution ◽  
Random Forest ◽  
Chlorophyll Content ◽  
Conditional Inference ◽  
Landsat 8 ◽  
Biophysical Parameters ◽  
Machine Learning Methods

Open and free access to multi-frequent high-resolution data (e.g. Sentinel – 2) will fortify agricultural applications based on satellite data. The temporal and spatial resolution of these remote sensing datasets directly affects the applicability of remote sensing methods, for instance a robust retrieving of biophysical parameters over the entire growing season with very high geometric resolution. <br><br> In this study we use machine learning methods to predict biophysical parameters, namely the fraction of absorbed photosynthetic radiation (FPAR), the leaf area index (LAI) and the chlorophyll content, from high resolution remote sensing. 30 Landsat 8 OLI scenes were available in our study region in Mecklenburg-Western Pomerania, Germany. In-situ data were weekly to bi-weekly collected on 18 maize plots throughout the summer season 2015. <br><br> The study aims at an optimized prediction of biophysical parameters and the identification of the best explaining spectral bands and vegetation indices. For this purpose, we used the entire in-situ dataset from 24.03.2015 to 15.10.2015. Random forest and conditional inference forests were used because of their explicit strong exploratory and predictive character. Variable importance measures allowed for analysing the relation between the biophysical parameters with respect to the spectral response, and the performance of the two approaches over the plant stock evolvement. <br><br> Classical random forest regression outreached the performance of conditional inference forests, in particular when modelling the biophysical parameters over the entire growing period. For example, modelling biophysical parameters of maize for the entire vegetation period using random forests yielded: FPAR: R² = 0.85; RMSE = 0.11; LAI: R² = 0.64; RMSE = 0.9 and chlorophyll content (SPAD): R² = 0.80; RMSE=4.9. <br><br> Our results demonstrate the great potential in using machine-learning methods for the interpretation of long-term multi-frequent remote sensing datasets to model biophysical parameters.

scholarly journals Evaluation of Surface Reflectance Products Based on Optimized 6S Model Using Synchronous In Situ Measurements

2021 ◽  
Vol 14 (1) ◽  
pp. 83
Author(s):  
Xiaocheng Zhou ◽  
Xueping Liu ◽  
Xiaoqin Wang ◽  
Guojin He ◽  
Youshui Zhang ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Atmospheric Correction ◽  
Solar Spectrum ◽  
In Situ Measurements ◽  
Landsat 8 ◽  
Surface Reflectance ◽  
Landsat 8 Oli ◽  
Auxiliary Data ◽  
Sentinel 2

Surface reflectance (SR) estimation is the most essential preprocessing step for multi-sensor remote sensing inversion of geophysical parameters. Therefore, accurate and stable atmospheric correction is particularly important, which is the premise and basis of the quantitative application of remote sensing. It can also be used to directly compare different images and sensors. The Landsat-8 Operational Land Imager (OLI) and Sentinel-2 Multi-Spectral Instrument (MSI) surface reflectance products are publicly available and demonstrate high accuracy. However, there is not enough validation using synchronous spectral measurements over China’s land surface. In this study, we utilized Moderate Resolution Imaging Spectroradiometer (MODIS) atmospheric products reconstructed by Categorical Boosting (CatBoost) and 30 m ASTER Global Digital Elevation Model (ASTER GDEM) data to adjust the relevant parameters to optimize the Second Simulation of Satellite Signal in the Solar Spectrum (6S) model. The accuracy of surface reflectance products obtained from the optimized 6S model was compared with that of the original 6S model and the most commonly used Fast Line-of-sight Atmospheric Analysis of Spectral Hypercubes (FLAASH) model. Surface reflectance products were validated and evaluated with synchronous in situ measurements from 16 sites located in five provinces of China: Fujian, Gansu, Jiangxi, Hunan, and Guangdong. Through the indirect and direct validation across two sensors and three methods, it provides evidence that the synchronous measurements have the higher and more reliable validation accuracy. The results of the validation indicated that, for Landsat-8 OLI and Sentinel-2 MSI SR products, the overall root mean square error (RMSE) calculated results of optimized 6S, original 6S and FLAASH across all spectral bands were 0.0295, 0.0378, 0.0345, and 0.0313, 0.0450, 0.0380, respectively. R2 values reached 0.9513, 0.9254, 0.9316 and 0.9377, 0.8822, 0.9122 respectively. Compared with the original 6S model and FLAASH model, the mean percent absolute error (MPAE) of the optimized 6S model was reduced by 32.20% and 15.86% for Landsat-8 OLI, respectively. On the other, for the Sentinel-2 MSI SR product, the MPAE value was reduced by 33.56% and 33.32%. For the two kinds of data, the accuracy of each band was improved to varying extents by the optimized 6S model with the auxiliary data. These findings support the hypothesis that reliable auxiliary data are helpful in reducing the influence of the atmosphere on images and restoring reality as much as is feasible.

scholarly journals MODELLING BIOPHYSICAL PARAMETERS OF MAIZE USING LANDSAT 8 TIME SERIES

2016 ◽  
Vol XLI-B2 ◽  
pp. 171-175
Author(s):  
Thorsten Dahms ◽  
Sylvia Seissiger ◽  
Christopher Conrad ◽  
Erik Borg
Keyword(s):  
Machine Learning ◽  
Remote Sensing ◽  
High Resolution ◽  
Random Forest ◽  
Chlorophyll Content ◽  
Conditional Inference ◽  
Landsat 8 ◽  
Biophysical Parameters ◽  
Machine Learning Methods

Open and free access to multi-frequent high-resolution data (e.g. Sentinel – 2) will fortify agricultural applications based on satellite data. The temporal and spatial resolution of these remote sensing datasets directly affects the applicability of remote sensing methods, for instance a robust retrieving of biophysical parameters over the entire growing season with very high geometric resolution. &lt;br&gt;&lt;br&gt; In this study we use machine learning methods to predict biophysical parameters, namely the fraction of absorbed photosynthetic radiation (FPAR), the leaf area index (LAI) and the chlorophyll content, from high resolution remote sensing. 30 Landsat 8 OLI scenes were available in our study region in Mecklenburg-Western Pomerania, Germany. In-situ data were weekly to bi-weekly collected on 18 maize plots throughout the summer season 2015. &lt;br&gt;&lt;br&gt; The study aims at an optimized prediction of biophysical parameters and the identification of the best explaining spectral bands and vegetation indices. For this purpose, we used the entire in-situ dataset from 24.03.2015 to 15.10.2015. Random forest and conditional inference forests were used because of their explicit strong exploratory and predictive character. Variable importance measures allowed for analysing the relation between the biophysical parameters with respect to the spectral response, and the performance of the two approaches over the plant stock evolvement. &lt;br&gt;&lt;br&gt; Classical random forest regression outreached the performance of conditional inference forests, in particular when modelling the biophysical parameters over the entire growing period. For example, modelling biophysical parameters of maize for the entire vegetation period using random forests yielded: FPAR: R² = 0.85; RMSE = 0.11; LAI: R² = 0.64; RMSE = 0.9 and chlorophyll content (SPAD): R² = 0.80; RMSE=4.9. &lt;br&gt;&lt;br&gt; Our results demonstrate the great potential in using machine-learning methods for the interpretation of long-term multi-frequent remote sensing datasets to model biophysical parameters.

scholarly journals Mapping Submerged Aquatic Vegetation along the Central Vietnamese Coast Using Multi-Source Remote Sensing

2020 ◽  
Vol 9 (6) ◽  
pp. 395
Author(s):  
Tran Ngoc Khanh Ni ◽  
Hoang Cong Tin ◽  
Vo Trong Thach ◽  
Cédric Jamet ◽  
Izuru Saizen
Keyword(s):  
Remote Sensing ◽  
Coastal Area ◽  
Submerged Aquatic Vegetation ◽  
Aquatic Vegetation ◽  
Marine Ecosystem ◽  
Atmospheric Effects ◽  
Landsat 8 ◽  
Distribution Maps ◽  
South Central

Submerged aquatic vegetation (SAV) in the Khanh Hoa (Vietnam) coastal area plays an important role in coastal communities and the marine ecosystem. However, SAV distribution varies widely, in terms of depth and substrate types, making it difficult to monitor using in-situ measurement. Remote sensing can help address this issue. High spatial resolution satellites, with more bands and higher radiometric sensitivity, have been launched recently, including the Vietnamese Natural Resources, Environment, and Disaster Monitoring Satellite (VNREDSat-1) (V1) sensor from Vietnam, launched in 2013. The objective of the study described here was to establish SAV distribution maps for South-Central Vietnam, particularly in the Khanh Hoa coastal area, using Sentinel-2 (S2), Landsat-8, and V1 imagery, and then to assess any changes to SAV over the last ten years, using selected historical data. The satellite top-of-atmosphere signals were initially converted to radiance, and then corrected for atmospheric effects. This treated signal was then used to classify Khanh Hoa coastal water substrates, and these classifications were evaluated using 101 in-situ measurements, collected in 2017 and 2018. The results showed that the three satellites could provide high accuracy, with Kappa coefficients above 0.84, with V1 achieving over 0.87. Our results showed that, from 2008 to 2018, SAV acreage in Khanh Hoa was reduced by 74.2%, while gains in new areas compensated for less than half of these losses. This is the first study to show the potential for using V1 and S2 data to assess the distribution status of SAV in Vietnam, and its outcomes will contribute to the conservation of SAV beds, and to the sustainable exploitation of aquatic resources in the Khanh Hoa coastal area.

Sign in / Sign up

Export Citation Format

Share Document