scholarly journals Low Delay Video Streaming on the Internet of Things Using Raspberry Pi

Electronics ◽  
2016 ◽  
Vol 5 (4) ◽  
pp. 60 ◽  
Author(s):  
Ulf Jennehag ◽  
Stefan Forsstrom ◽  
Federico Fiordigigli
Keyword(s):  
Internet Of Things ◽  
Video Streaming ◽  
Raspberry Pi ◽  
The Internet ◽  
Low Delay ◽  
The Internet Of Things

Towards Autonomous IoT Logistics Objects

2017 ◽  
pp. 210-222
Author(s):  
Bill Karakostas
Keyword(s):  
Internet Of Things ◽  
System Performance ◽  
Credit Card ◽  
Raspberry Pi ◽  
The Internet ◽  
Simulated Environment ◽  
Embedded Knowledge ◽  
New Knowledge ◽  
The Internet Of Things ◽  
Computing Infrastructure

To improve the overall impact of the Internet of Things (IoT), intelligent capabilities must be developed at the edge of the IoT ‘Cloud.' ‘Smart' IoT objects must not only communicate with their environment, but also use embedded knowledge to interpret signals, and by making inferences augment their knowledge of their own state and that of their environment. Thus, intelligent IoT objects must improve their capabilities to make autonomous decisions without reliance to external computing infrastructure. In this chapter, we illustrate the concept of smart autonomous logistic objects with a proof of concept prototype built using an embedded version of the Prolog language, running on a Raspberry Pi credit-card-sized single-board computer to which an RFID reader is attached. The intelligent object is combining the RFID readings from its environment with embedded knowledge to infer new knowledge about its status. We test the system performance in a simulated environment consisting of logistics objects.

scholarly journals РОЗРОБЛЕННЯ МЕТОДИКИ PSMECA АНАЛІЗУ ПРИ ЗАСТОСУВАННІ IoT КОМПОНЕНТІВ У СИСТЕМАХ ФІЗИЧНОЇ БЕЗПЕКИ

2018 ◽  
pp. 63-73 ◽  
Author(s):  
Ahmed Waleed Al-Khafaji
Keyword(s):  
Internet Of Things ◽  
Research And Development ◽  
Theoretical Models ◽  
Security System ◽  
Raspberry Pi ◽  
The Internet ◽  
Physical Security ◽  
Security Systems ◽  
Internet Of Things Environment ◽  
The Internet Of Things

Physical security systems are applied to alert in advance a well-known vector of attacks. This paper presents an analysis of the research and assessment of physical security systems applying the PSMECA technique (analysis of modes, efforts, and criticality of physical security). The object of research and analysis is the physical security system of the Ministry of Education and Science of Iraq (as the infrastructure of the region's objects), as well as the area of the compact living of students and co-workers (campus). This paper discusses the organization of physical security systems, which are based on devices with low power consumption and function in the Internet of things environment. The main aim is to describe and develop a physical security system that functions in the Internet of things environment, as well as the development of a scheme for the research and development of models and methods for risk analysis, models of functions and components, models of failures and conducting research and analysis of occurrence failures of PSS. The generalized structural and hierarchical scheme of the physical security system of the infrastructure of the region is presented, as well as the applied application of the scheme is illustrated by the example of the physical security system of a student campus of one of the universities of Baghdad. The functional modeling scheme of the object is provided and is based on the use of the Raspberry Pi microcomputer and the Arduino microcontroller. The set-theoretical models of functions, components, and failures of the system under study, as well as the projection of a hierarchical failure structure in the table of the basic structural elements of the system, are presented. The IDEF0 diagram, showing a power outage scenario (accidental or intentional) in connection with lighting and video subsystems, is presented. The scheme of research and development of models and methods of analysis of risks of PSS is carried out in the paper. A PSMECA table for the CCTV system has been created, which allows you to more precisely determine the cause of the failure in the physical security system and the importance of failure criticality

scholarly journals Analysis of WebAssembly as a Strategy to Improve JavaScript Performance on IoT Environments

2020 ◽  
Author(s):  
Fernando Oliveira ◽  
Júlio Mattos
Keyword(s):  
Internet Of Things ◽  
Mobile Applications ◽  
Raspberry Pi ◽  
The Internet ◽  
Memory Usage ◽  
C Language ◽  
Server Side ◽  
Benchmark Suite ◽  
Iot Devices ◽  
The Internet Of Things

JavaScript language (JS) has been widely used in recent years applied to browsers-context. Yet JS is being applied to other backgrounds such as server-side programming, mobile applications, games, robotics, and the Internet of Things (IoT). JavaScript is suitable for programming IoT devices due to eventdriven oriented architecture. However, it is an interpreted language, so it has a lower performance than a compiled language. This paper assesses the use of WebAssembly as a strategy to improve the performance of JavaScript applications in the IoT environment. The experiments were performed on a Raspberry Pi using the Ostrich Benchmark Suite. We run the algorithms in JavaScript, WebAssembly, and C language while collecting data about device resource consumption. Our results showed that JavaScript performance could be improved by 39.81% in terms of execution time, a tiny gain in memory usage, and reduced battery consumption by 39.86% when using WebAssembly.

scholarly journals Development of Monitoring System using the Internet of Things for Industrial Revolution 4.0

2020 ◽  
Vol 9 (3) ◽  
pp. 2790-2794
Keyword(s):  
Internet Of Things ◽  
Humidity Sensor ◽  
Industrial Revolution ◽  
Smartphone Application ◽  
Raspberry Pi ◽  
The Internet ◽  
Prototype System ◽  
Iot Platform ◽  
Relative Change ◽  
The Internet Of Things

The fourth industrial revolution represents smarter systems, faster and more optimized system of artificial intelligence, which involves control systems and sensors networks. In this paper, the concept of the Internet of Things (IoT) was applied preliminarily to create the connection between machine and the user, using a sensor, a processor such as Raspberry Pi, and IoT platform application such as Blynk in the smartphone. The simple IR 4.0 prototype system and IoT apps were developed in order to create a connection between sensors and user through the internet consisting of a temperature and humidity sensor, which is DHT11 and a Raspberry Pi 3 Model B. The smartphone application would be developed through the Blynk application for this simple prototype system. The graphical user interface GUI was built within the Blynk app and link it to the sensor which is already connected to the Raspberry Pi. The analysis that was done upon the system is by varying the stimuli to the sensors, which is a hairdryer with three levels of heat and observe the relative change of the reading of temperature and percentage of humidity on the apps. Therefore, the preliminary result shows an increase in temperature as the heat level increases. On the other hand, the percentage of humidity becomes lower as the temperature goes higher. Based on the results and the analysis, it had shown that the IR 4.0 prototype system of IoT monitoring can connect between the sensor and the smartphone application with real-time monitoring through the internet.

scholarly journals COSMOS: Collaborative, Seamless and Adaptive Sentinel for the Internet of Things

Sensors ◽  
2019 ◽  
Vol 19 (7) ◽  
pp. 1492 ◽  
Author(s):  
Pantaleone Nespoli ◽  
David Useche Pelaez ◽  
Daniel Díaz López ◽  
Félix Gómez Mármol
Keyword(s):  
Internet Of Things ◽  
Real World ◽  
Smart Devices ◽  
Raspberry Pi ◽  
The Internet ◽  
Security Issues ◽  
Dynamic Scenario ◽  
Computer Based ◽  
Iot Devices ◽  
The Internet Of Things

The Internet of Things (IoT) became established during the last decade as an emerging technology with considerable potentialities and applicability. Its paradigm of everything connected together penetrated the real world, with smart devices located in several daily appliances. Such intelligent objects are able to communicate autonomously through already existing network infrastructures, thus generating a more concrete integration between real world and computer-based systems. On the downside, the great benefit carried by the IoT paradigm in our life brings simultaneously severe security issues, since the information exchanged among the objects frequently remains unprotected from malicious attackers. The paper at hand proposes COSMOS (Collaborative, Seamless and Adaptive Sentinel for the Internet of Things), a novel sentinel to protect smart environments from cyber threats. Our sentinel shields the IoT devices using multiple defensive rings, resulting in a more accurate and robust protection. Additionally, we discuss the current deployment of the sentinel on a commodity device (i.e., Raspberry Pi). Exhaustive experiments are conducted on the sentinel, demonstrating that it performs meticulously even in heavily stressing conditions. Each defensive layer is tested, reaching a remarkable performance, thus proving the applicability of COSMOS in a distributed and dynamic scenario such as IoT. With the aim of easing the enjoyment of the proposed sentinel, we further developed a friendly and ease-to-use COSMOS App, so that end-users can manage sentinel(s) directly using their own devices (e.g., smartphone).

Towards Autonomous IoT Logistics Objects

2020 ◽  
pp. 213-225
Author(s):  
Bill Karakostas
Keyword(s):  
Internet Of Things ◽  
System Performance ◽  
Credit Card ◽  
Raspberry Pi ◽  
The Internet ◽  
Simulated Environment ◽  
Embedded Knowledge ◽  
New Knowledge ◽  
The Internet Of Things ◽  
Computing Infrastructure

To improve the overall impact of the Internet of Things (IoT), intelligent capabilities must be developed at the edge of the IoT ‘Cloud.' ‘Smart' IoT objects must not only communicate with their environment, but also use embedded knowledge to interpret signals, and by making inferences augment their knowledge of their own state and that of their environment. Thus, intelligent IoT objects must improve their capabilities to make autonomous decisions without reliance to external computing infrastructure. In this chapter, we illustrate the concept of smart autonomous logistic objects with a proof of concept prototype built using an embedded version of the Prolog language, running on a Raspberry Pi credit-card-sized single-board computer to which an RFID reader is attached. The intelligent object is combining the RFID readings from its environment with embedded knowledge to infer new knowledge about its status. We test the system performance in a simulated environment consisting of logistics objects.

scholarly journals Raspberry Pi-Based Farming Automation and Monitoring System using Automatic Weather System (AWS) (Case Study: Chili Plants)

2018 ◽  
Vol 7 (4.44) ◽  
pp. 172
Author(s):  
Erfan Rohadi ◽  
Raka Admiral Abdurrahman ◽  
Ekojono . ◽  
Rosa Andrie Asmara ◽  
Indrazno Siradjuddin ◽  
...  
Keyword(s):  
Internet Of Things ◽  
Monitoring System ◽  
Raspberry Pi ◽  
The Internet ◽  
Automation System ◽  
Process Data ◽  
Weather System ◽  
Internet Connectivity ◽  
The Internet Of Things

Recently, The Internet of Things (IoT) has been implemented and become an interesting topic for discussion. IoT is a method that aims to maximize the benefits of Internet connectivity to transfer and process data or information through an internet network wirelessly, virtual and autonomous. One of the IoT's utilization is automation system. The automation system generally uses a timer for the plant watering process. The use of timers aims to water the plants routinely without human assistance. The development of this automation system begins with the making of the prototype of chili land in the field 5 x 2.5 meters, then compile the required components and how it works. Further programming of sensors to Raspberry Pi as a controller in the system based on the conditions that have been set and changes in temperature received by the sensor. As a result, the system has been successfully done automatic watering, both on a regular basis (at 06.00 and 18.00) and cooling watering. Cooling is done if the temperature exceeds more than 30 degrees Celsius. The automation system promises to be applied to the utilization of land around the house.  

Sign in / Sign up

Export Citation Format

Share Document