scholarly journals Motor Imagery Based Continuous Teleoperation Robot Control with Tactile Feedback

Electronics ◽  
2020 ◽  
Vol 9 (1) ◽  
pp. 174 ◽  
Author(s):  
Baoguo Xu ◽  
Wenlong Li ◽  
Xiaohang He ◽  
Zhiwei Wei ◽  
Dalin Zhang ◽  
...  

Brain computer interface (BCI) adopts human brain signals to control external devices directly without using normal neural pathway. Recent study has explored many applications, such as controlling a teleoperation robot by electroencephalography (EEG) signals. However, utilizing the motor imagery EEG-based BCI to perform teleoperation for reach and grasp task still has many difficulties, especially in continuous multidimensional control of robot and tactile feedback. In this research, a motor imagery EEG-based continuous teleoperation robot control system with tactile feedback was proposed. Firstly, mental imagination of different hand movements was translated into continuous command to control the remote robotic arm to reach the hover area of the target through a wireless local area network (LAN). Then, the robotic arm automatically completed the task of grasping the target. Meanwhile, the tactile information of remote robotic gripper was detected and converted to the feedback command. Finally, the vibrotactile stimulus was supplied to users to improve their telepresence. Experimental results demonstrate the feasibility of using the motor imagery EEG acquired by wireless portable equipment to realize the continuous teleoperation robot control system to finish the reach and grasp task. The average two-dimensional continuous control success rates for online Task 1 and Task 2 of the six subjects were 78.0% ± 6.1% and 66.2% ± 6.0%, respectively. Furthermore, compared with the traditional EEG triggered robot control using the predefined trajectory, the continuous fully two-dimensional control can not only improve the teleoperation robot system’s efficiency but also give the subject a more natural control which is critical to human–machine interaction (HMI). In addition, vibrotactile stimulus can improve the operator’s telepresence and task performance.

2021 ◽  
Vol 13 (4) ◽  
pp. 168781402110027
Author(s):  
Jianqiang Wang ◽  
Yanmin Zhang ◽  
Xintong Liu

To realize efficient palletizing robot trajectory planning and ensure ultimate robot control system universality and extensibility, the B-spline trajectory planning algorithm is used to establish a palletizing robot control system and the system is tested and analyzed. Simultaneously, to improve trajectory planning speeds, R control trajectory planning is used. Through improved algorithm design, a trajectory interpolation algorithm is established. The robot control system is based on R-dominated multi-objective trajectory planning. System stack function testing and system accuracy testing are conducted in a production environment. During palletizing function testing, the system’s single-step code packet time is stable at approximately 5.8 s and the average evolutionary algebra for each layer ranges between 32.49 and 45.66, which can save trajectory planning time. During system accuracy testing, the palletizing robot system’s repeated positioning accuracy is tested. The repeated positioning accuracy error is currently 10−1 mm and is mainly caused by friction and the machining process. By studying the control system of a four-degrees-of-freedom (4-DOF) palletizing robot based on the trajectory planning algorithm, the design predictions and effects are realized, thus providing a reference for more efficient future palletizing robot design. Although the working process still has some shortcomings, the research has major practical significance.


2009 ◽  
Vol 42 (16) ◽  
pp. 639-644 ◽  
Author(s):  
Hironao Yamada ◽  
Tang Xinxing ◽  
Ni Tao ◽  
Zhao Dingxuan ◽  
Ahmad Anas Yusof

2014 ◽  
Vol 1006-1007 ◽  
pp. 627-630 ◽  
Author(s):  
Xu Dong Yang

CAN bus was used as the data transferring channels in the two–level controllers, and the real-time,dexterity,expansibility and security for the Gluing control system based on CAN bus can be improved obviously.The system structure, principle and software design were introduced.The experiment shows that it is a reliable control system and it can meet the requirements of automatic gluing tasks.


Sign in / Sign up

Export Citation Format

Share Document