scholarly journals Effects of Injection Timing on Combustion and Emission Performance of Dual-Fuel Diesel Engine under Low to Medium Load Conditions

Energies ◽  
2019 ◽  
Vol 12 (12) ◽  
pp. 2349 ◽  
Author(s):  
Hua Zhou ◽  
Hong-Wei Zhao ◽  
Yu-Peng Huang ◽  
Jian-Hui Wei ◽  
Yu-Hui Peng
Keyword(s):  
Output Power ◽  
Substitution Rate ◽  
Pollutant Emissions ◽  
Dual Fuel ◽  
Injection Timing ◽  
Excess Air ◽  
Diesel Injection ◽  
Medium Speed ◽  
Hc Emissions ◽  
Load Conditions

A throttle can be installed on the intake pipe of a natural gas (NG)/diesel dual-fuel engine to control the excess air ratio of the air-fuel mixture by adjusting the air intake. Building on a previously proposed NG/diesel dual-fuel supply strategy using the adjustment of excess air ratio, this work further studied the effects of different injection timing schemes on output power, fuel efficiency, and pollutant emissions of a dual-fuel engine under low to medium load conditions. In the experiment, the engine was operated at a speed of 1600 r/min, under either low (27.1 N·m) or medium (50.6 N·m) loads, and the NG substitution rate was either 40%, 60%, or 80%. The effect of different injection timing schemes on the combustion performance of the engine under low to medium load conditions was studied based on in-cylinder pressure changes detected by a pressure sensor. Experimental results showed that under medium-speed low-load conditions and a NG substitution rate of 40%, setting the diesel injection timing to 27 °CA BTDC increased the engine output power by 9.03%, reduced the brake specific energy consumption (BSEC) by 13.33%, and effectively reduced CO, CO2, and HC emissions. Under medium-speed medium-load conditions with a NG substitution rate of 80%, setting the diesel injection timing to 25 °CA BTDC increased the engine output power by 14.62%, reduced the BSEC by 11.73%, and significantly reduced CO, CO2, and HC emissions.

Diesel-Like Efficiency Using CNG/Diesel Dual-Fuel Combustion

2015 ◽  
Author(s):  
Karthik Nithyanandan ◽  
Jiaxiang Zhang ◽  
Yuqiang Li ◽  
Xiangyu Meng ◽  
Robert Donahue ◽  
...  
Keyword(s):  
Natural Gas ◽  
Substitution Rate ◽  
Fuel Combustion ◽  
Operating Conditions ◽  
Pollutant Emissions ◽  
Dual Fuel ◽  
Injection Timing ◽  
Diesel Combustion ◽  
Diesel Injection ◽  
Dual Fuel Combustion

The use of natural gas in compression ignition engines as a supplement to diesel under dual-fuel combustion mode is a promising technique to increase efficiency and reduce emissions. In this study, the effect of dual-fuel operating mode on combustion characteristics, engine performance and pollutant emissions of a diesel engine using natural gas as primary fuel and neat diesel as pilot fuel, has been examined. Natural Gas (99% Methane) was port injected into an AVL 5402 single cylinder diesel research engine under various engine operating conditions and up to 90% substitution was achieved. In addition, neat diesel was also tested as a baseline for comparison. The experiments were conducted at three different speeds — 1200, 1500 and 2000 RPM, and at different diesel-equivalent loads (injection quantity) — 15, 20, and 25 mg/cycle. Both performance and emissions data are presented and discussed. The performance was evaluated through measurements of in-cylinder pressure, power output and various exhaust emissions including unburned hydrocarbons (UHC), carbon monoxide (CO), nitrogen oxides (NOx) and soot. The goal of these experiments was to maximize the efficiency. This was done as follows — the CNG substitution rate (based on energy) was increased from 30% to 90% at fixed engine conditions, to identify the optimum CNG substitution rate. Then using that rate, a main injection timing sweep was performed. Under these optimized conditions, combustion behavior was also compared between single, double and triple injections. Finally, a load and speed sweep at the optimum CNG rate and timings were performed. It was found that a 70 % CNG substitution provided the highest indicated thermal efficiency. It appears that dual-fuel combustion has a Maximum Brake Torque (MBT) diesel injection timing for different conditions which provides the highest torque. Based on multiple diesel injection tests, it was found that the conditions that favor pure diesel combustion, also favor dual-fuel combustion because better diesel combustion provides better ignition and combustion for the CNG-air mixture. For 70% CNG dual-fuel combustion, multiple diesel injection showed an increase in the efficiency. Based on the experiments conducted, diesel-CNG dual-fuel combustion is able to achieve similar efficiency and reduced emissions relative to pure diesel combustion. As such, CNG can be effectively used to substitute for diesel fuel in CI engines.

Dual-Fuel Diesel Engine Combustion With Hydrogen, Gasoline, and Ethanol as Fumigants: Effect of Diesel Injection Timing

2014 ◽  
Vol 136 (8) ◽  
Author(s):  
Wei Fang ◽  
Bin Huang ◽  
David B. Kittelson ◽  
William F. Northrop
Keyword(s):  
Diesel Engine ◽  
Alternative Fuels ◽  
Research Effort ◽  
Dual Fuel ◽  
Injection Timing ◽  
Energy Fraction ◽  
Rail Systems ◽  
Diesel Injection ◽  
Hc Emissions ◽  
Cycle Efficiency

Premixed compression ignition (CI) combustion has attracted increasing research effort recently due to its potential to achieve both high thermal efficiency and low emissions. Dual-fuel strategies for enabling premixed CI have been a focus using a low-reactivity fumigant and direct diesel injection to control ignition. Alternative fuels like hydrogen and ethanol have been used as fumigants in the past but typically with diesel injection systems that did not allow the same degree of control or mixing enabled by modern common rail systems. In this work, we experimentally investigated hydrogen, ethanol, and gasoline as fumigants and examined three levels of fumigant energy fraction (FEF) using gasoline over a large, direct diesel injection timing range with a single-cylinder diesel engine. It was found that the operable diesel injection timing range at constant FEF was dependent on the fumigant's propensity for autoignition. Peak indicated gross cycle efficiency occurred with advanced diesel injection timing and aligned well with combustion phasing near top dead center (TDC), as we found in an earlier work. The use of hydrogen as a fumigant resulted in very low hydrocarbon (HC) emissions compared with ethanol and gasoline, establishing that they mainly result from incomplete combustion of the fumigated fuel. Hydrogen emissions were independent of diesel injection timing, and HC emissions were strongly linked to combustion phasing, giving further indication that squish and crevice flows are responsible for partially burned species from fumigation combustion.

Diesel-Like Efficiency Using Compressed Natural Gas/Diesel Dual-Fuel Combustion

2016 ◽  
Vol 138 (5) ◽  
Author(s):  
Karthik Nithyanandan ◽  
Jiaxiang Zhang ◽  
Yuqiang Li ◽  
Xiangyu Meng ◽  
Robert Donahue ◽  
...  
Keyword(s):  
Natural Gas ◽  
Substitution Rate ◽  
Fuel Combustion ◽  
Dual Fuel ◽  
Injection Timing ◽  
Diesel Combustion ◽  
Compressed Natural Gas ◽  
Diesel Injection ◽  
Dual Fuel Combustion ◽  
Ci Engines

The use of natural gas in compression ignition (CI) engines as a supplement to diesel under dual-fuel combustion mode is a promising technique to increase efficiency and reduce emissions. In this study, the effect of dual-fuel operating mode on combustion characteristics, engine performance and pollutant emissions of a diesel engine using natural gas as primary fuel and neat diesel as pilot fuel, has been examined. Natural gas (99% methane) was port injected into an AVL 5402 single cylinder diesel research engine under various engine operating conditions and up to 90% substitution was achieved. In addition, neat diesel was also tested as a baseline for comparison. The experiments were conducted at three different speeds—1200, 1500, and 2000 rpm, and at different diesel-equivalent loads (injection quantity)—15, 20 (7 bar IMEP), and 25 mg/cycle. Both performance and emissions data are presented and discussed. The performance was evaluated through measurements of in-cylinder pressure, power output and various exhaust emissions including unburned hydrocarbons (UHCs), carbon monoxide (CO), nitrogen oxides (NOx), and soot. The goal of these experiments was to maximize the efficiency. This was done as follows—the compressed natural gas (CNG) substitution rate (based on energy) was increased from 30% to 90% at fixed engine conditions, to identify the optimum CNG substitution rate. Then using that rate, a main injection timing sweep was performed. Under these optimized conditions, combustion behavior was also compared between single, double, and triple injections. Finally, a load and speed sweep at the optimum CNG rate and timings were performed. It was found that a 70% CNG substitution provided the highest indicated thermal efficiency (ITE). It appears that dual-fuel combustion has a maximum brake torque (MBT) diesel injection timing for different conditions which provides the highest torque. Based on multiple diesel injection tests, it was found that the conditions that favor pure diesel combustion, also favor dual-fuel combustion because better diesel combustion provides better ignition and combustion for the CNG-air mixture. For 70% CNG dual-fuel combustion, multiple diesel injections showed an increase in the efficiency. Based on the experiments conducted, diesel-CNG dual-fuel combustion is able to achieve similar efficiency and reduced emissions relative to pure diesel combustion. As such, CNG can be effectively used to substitute for diesel fuel in CI engines.

Injector Tip Temperature and Combustion Performance of a Natural Gas-Diesel Dual Fuel Engine at Medium and High Load Conditions

2018 ◽  
Author(s):  
Hongsheng Guo ◽  
Brian Liko
Keyword(s):  
Natural Gas ◽  
Internal Combustion Engines ◽  
High Load ◽  
Dual Fuel ◽  
Injection Timing ◽  
Combustion Engines ◽  
Combustion Performance ◽  
Diesel Injection ◽  
Dual Fuel Combustion ◽  
Load Conditions

Diesel engines have been widely used due to the higher reliability and superior fuel conversion efficiency. However, they still generate significant amount of carbon dioxide (CO2) and particulate matter (PM) emissions. Natural gas is a low carbon and clean fuel that generates less CO2 and PM emissions than diesel during combustion. Replacing diesel by natural gas in internal combustion engines help reduce both CO2 and PM emissions. Natural gas – diesel dual fuel combustion is a practical and efficient way to replace diesel by natural gas in internal combustion engines. One concern for dual fuel combustion engines is the diesel injector tip temperature increase with increasing natural gas fraction. This paper reports an experimental investigation on the diesel injector tip temperature variation and combustion performance of a natural gas – diesel dual fuel engine at medium and high load conditions. The natural gas fraction was changed from zero to 90% in the experiment. The results suggest that the injector tip temperature increased with increasing natural gas fraction at a given diesel injection timing or with advancing the diesel injection timing at a given natural gas fraction. However, the injector tip temperature never exceeded 250 °C in the whole experimental range. The effect of natural gas fraction on combustion performance depended on engine load and diesel injection timing.

Dual-Fuel Diesel Engine Combustion With Hydrogen, Gasoline and Ethanol as Fumigants: Effect of Diesel Injection Timing

2012 ◽  
Author(s):  
Wei Fang ◽  
Bin Huang ◽  
David B. Kittelson ◽  
William F. Northop
Keyword(s):  
Diesel Engine ◽  
Alternative Fuels ◽  
Research Effort ◽  
Dual Fuel ◽  
Injection Timing ◽  
Energy Fraction ◽  
Rail Systems ◽  
Diesel Injection ◽  
Hc Emissions ◽  
Cycle Efficiency

Premixed compression ignition (CI) combustion has attracted increasing research effort recently due to its potential to achieve both high thermal efficiency and low emissions. Dual-fuel strategies for enabling premixed CI have been a focus using a low reactivity fumigant and direct diesel injection to control ignition. Alternative fuels like hydrogen and ethanol have been used as fumigants in the past but typically with diesel injection systems that did not allow the same degree of control or mixing enabled by modern common rail systems. In this work we experimentally investigated hydrogen, ethanol and gasoline as fumigants and examined three levels of fumigant energy fraction (FEF) using gasoline over a large direct diesel injection timing range with a single cylinder diesel engine. It was found that the operable diesel injection timing range at constant FEF was dependent on the fumigant’s propensity for autoignition. Peak indicated gross cycle efficiency occurred with advanced diesel injection timing and aligned well with combustion phasing near TDC as we found in an earlier work. The use of hydrogen as a fumigant resulted in very low HC emissions compared with ethanol and gasoline, establishing that they mainly result from incomplete combustion of the fumigated fuel. Hydrogen emissions were independent of diesel injection timing and HC emissions were strongly linked to combustion phasing, giving further indication that squish and crevice flows are responsible for partially burned species from fumigation combustion.

Simulation Research on Combustion Process in a Natural Gas-Diesel Dual-Fuel Marine Engine

2014 ◽  
Vol 525 ◽  
pp. 227-231 ◽  
Author(s):  
Min Xiao ◽  
Chun Long Feng
Keyword(s):  
Natural Gas ◽  
Total Energy ◽  
Combustion Process ◽  
Power Reduction ◽  
Dual Fuel ◽  
Injection Timing ◽  
Simulation Research ◽  
Injection Duration ◽  
Medium Speed ◽  
The Right

In order to solve the problem of Diesel natural gas dual fuel engine, such as power reduction, low charging efficiency, the conception of diesel engine fueled with pilot-ignited directly-injected liquefied natural gas is put forward. On the basis of this theory, a medium speed diesel of the marine is refitted into dual fuel engine, in order to keep original power, decrease the temperature of combustion and reduce emission. The LNG injection timing, duration of LNG injection and the different ratios the pilot diesel to total energy are studied the method of AVL FIRE software. Conclusions are as follows: When the different ratios pilot diesel to total energy is 0.5%, the engine can not work; Delaying the LNG injection timing, shortening the LNG injection duration and choose the right ratios pilot diesel to total energy can reach the indicated power of original machine, and the NOx emissions level will be greatly reduced.

scholarly journals Study on the Effect of Second Injection Timing on the Engine Performances of a Gasoline/Hydrogen SI Engine with Split Hydrogen Direct Injecting

Energies ◽  
2020 ◽  
Vol 13 (19) ◽  
pp. 5223
Author(s):  
Guanting Li ◽  
Xiumin Yu ◽  
Ping Sun ◽  
Decheng Li
Keyword(s):  
Numerical Study ◽  
Direct Injection ◽  
Mixture Distribution ◽  
Spark Ignition ◽  
Injection Timing ◽  
Si Engine ◽  
Excess Air ◽  
Crank Angle ◽  
Hc Emissions ◽  
Main Factor

Split hydrogen direct injection (SHDI) has been proved capable of better efficiency and fewer emissions. Therefore, to investigate SHDI deeply, a numerical study on the effect of second injection timing was presented at a gasoline/hydrogen spark ignition (SI) engine with SHDI. With an excess air ratio of 1.5, five different second injection timings achieved five kinds of hydrogen mixture distribution (HMD), which was the main factor affecting the engine performances. With SHDI, since the HMD is manageable, the engine can achieve better efficiency and fewer emissions. When the second injection timing was 105° crank angle (CA) before top dead center (BTDC), the Pmax was the highest and the position of the Pmax was the earliest. Compared with the single hydrogen direct injection (HDI), the NOX, CO and HC emissions with SHDI were reduced by 20%, 40% and 72% respectively.

Influence of Diesel Fuel Injection Characteristics on Dual-Fuel Combustion Modes in a Large-Bore, Medium-Speed Engine

2019 ◽  
Vol 142 (1) ◽  
Author(s):  
Adam Klingbeil ◽  
Seunghyuck Hong ◽  
Roy J. Primus
Keyword(s):  
Diesel Fuel ◽  
Combustion Process ◽  
Operating Conditions ◽  
Critical Parameters ◽  
Dual Fuel ◽  
Injection Timing ◽  
Analytical Methodology ◽  
Cycle Variation ◽  
Medium Speed ◽  
Substitution Ratio

Abstract Experiments were conducted on a large bore, medium speed, single cylinder, diesel engine to investigate operation with substitution ratio of natural gas (NG) varying from 0% to 93% by energy. In a previous study by the same group, these data were used to validate an analytical methodology for predicting performance and emissions under a broad spectrum of energy substitution ratios. For this paper, these experimental data are further analyzed to better understand the performance and combustion behavior under NG substitution ratios of 0%, 60%, and 93%. These results show that by transitioning from diesel-only to 60% dual-fuel (DF) (60% NG substitution ratio), an improvement in the NOx-efficiency trade-off was observed that represented a ∼3% improvement in indicated efficiency at constant NOx. Further, the transition from 60% DF to 93% DF (93% NG substitution ratio) resulted in additional efficiency improvement with a simultaneous reduction in NOx emissions. The data suggest that this improvement can be attributed to the premixed nature of the high substitution ratio case. Furthermore, the results show that high cycle-to-cycle variation was observed for some 93% DF combustion tests. Further analysis, along with diesel injection rate measurements, shows that the observed extreme sensitivity of the combustion event can be attributed to critical parameters such as diesel fuel quantity and injection timing. These results suggest a better understanding of the relative importance of combustion system components and operating conditions in controlling cycle-to-cycle variation of combustion process.

Sign in / Sign up

Export Citation Format

Share Document