Power Reduction in Punch-Through Current-Based Electro-Thermal Annealing in Gate-All-Around FETs

Device guidelines for reducing power with punch-through current annealing in gate-all-around (GAA) FETs were investigated based on three-dimensional (3D) simulations. We studied and compared how different geometric dimensions and materials of GAA FETs impact heat management when down-scaling. In order to maximize power efficiency during electro-thermal annealing (ETA), applying gate module engineering was more suitable than engineering the isolation or source drain modules.

Impact of aerosols on photovoltaic energy production using a spectrally resolved model chain: A case study for Sub-Sahara West-Africa

<p>West Africa has a great potential for the application of solar energy systems, as it combines high levels of solar irradiance with a lack of energy production. Southern West Africa is a region with a very high aerosol load. Urbanization, uncontrolled fires, traffic as well as power plants and oil rigs lead to increasing anthropogenic emissions. The naturally circulating north winds bring mineral dust from the Sahel and Sahara and monsoons - sea salt and other oceanic compounds from the south. The EU-funded Dynamics-Aerosol-Chemistry-Cloud Interactions in West Africa (DACCIWA) project (2014–2018), dlivered the most complete dataset of the atmosphere over the region to date. In our study, we use in-situ measured optical properties of aerosols from the airborne campaign over the Gulf of Guinea and inland, and from ground measurements in coastal cities.</p> <p>Based on an analysis of the aerosol optical properties form the DACCIWA measurement campaign, the impact of aerosol on PV power is investigated for polycrystalline silicon and amorphous silicon technology using a spectrally resolved model chain. The model considers both spectral effects on global irradiance due to different aerosol properties as well as the spectral response of different PV technologies. First, the contribution of various aerosol types (mineral dust, biomass burning and anthropogenic pollution) derived from a post-project classification is studied. Subsequently, differences between these imaginary aerosol scenarios and a real case during a biomass burning outbreak on July 13, 2016 in Benin are presented. The results show that aerosol emissions due to the biomass outbreak on the day of the case study in Cotonou lead to solar flux losses of up to 55% and photovoltaic power reduction of up to 81% for the polycrystalline cell and 78% for the amorphous cell. The relative impact of aerosols differs depending on aerosol type and concentration, being larger for low solar zenith angles than at noon. For the situation studied in Cotonou, Benin, we are able to show that the inclusion of spectral aspects leads to a significant effect when calculating the PV power. Comparing the effects of aerosols on the photovoltaic power of the two technologies, we find that the amorphous cell suffers a greater reduction in power during the morning and evening hours - when there is more diffuse irradiance - of 36% than the polycrystalline cell (27%). Conversely, in the middle of the day, we observe greater PV power reduction of the polycrystalline cell of 12% compared to the amorphous cell (8%).</p> <p><strong>Acknowledgements:</strong> Funding was provided by  the German BMWi under contract 0350009A and BMBF under contract 03SF0567A-.</p>

Power Reduction Methods in a Cloud Computing Environment

<p>With the explosive growth of cloud computing over the last two decades, there has been a corresponding increase in data center power requirements to meet those needs. While there are numerous additional aspects of data center power management that could be explored from an environmental and facilities perspective, this research study will primarily focus on the cloud computing infrastructure. The objective of this focus will be on answering the research question “What methods are available to optimize power consumption in a cloud computing environment?” </p><div><br></div>

Power Reduction Methods in a Cloud Computing Environment

<p>With the explosive growth of cloud computing over the last two decades, there has been a corresponding increase in data center power requirements to meet those needs. While there are numerous additional aspects of data center power management that could be explored from an environmental and facilities perspective, this research study will primarily focus on the cloud computing infrastructure. The objective of this focus will be on answering the research question “What methods are available to optimize power consumption in a cloud computing environment?” </p><div><br></div>

Investigation of HIT solar cells low frequency noise characteristics

The effect of solar cell fragment annealing on its noise characteristics is shown. The calculated difference in relaxation times arising from the change in noise after annealing was 30%. Measurements of noise characteristics in the dark and under illumination with a red laser with different radiation power were carried out. Close to linear dependences of noise power reduction with increasing radiation power were obtained.

Experimental Study of a Piezoelectric De-Icing System Implemented to Rotorcraft Blades

A four-year project investigating the use of piezoelectric actuators as a vibration-based low power de-icing system has been initiated at the Anti-Icing Materials Laboratory. The work done preceding this investigation consisted of studying, numerically and experimentally, the system integration to a flat plate structure, the optimal excitation of the system, the resonant structural modes and the shear stress amplitudes to achieve de-icing for that structure. In this new investigation, the concepts and conclusions obtained on the flat plate structure were used to design and integrate the system into a rotating blade structure. An experimental setup was built for de-icing tests in rotation within an icing wind tunnel, and a finite-element numerical model adapted to the new geometry of the blade was developed based on the expertise accumulated using previous flat plate structure analysis. Complete de-icing of the structure was obtained in the wind tunnel using the developed de-icing system, and its power consumption was estimated. The power consumption was observed to be lower than the currently used electrothermal systems. The finite-elements numerical model was therefore used to study the case of a full-scale tail rotor blade and showed that the power reduction of the system could be significantly higher for a longer blade, confirming, therefore, the relevance of further de-icing investigations on a full-scale tail rotor.