scholarly journals Towards the EU Emission Targets of 2050: Cost-Effective Emission Reduction in Finnish Detached Houses

Energies ◽  
2019 ◽  
Vol 12 (22) ◽  
pp. 4395 ◽  
Author(s):  
Janne Hirvonen ◽  
Juha Jokisalo ◽  
Juhani Heljo ◽  
Risto Kosonen
Keyword(s):  
Life Cycle Cost ◽  
Cost Effective ◽  
Heat Pumps ◽  
Building Envelope ◽  
The European Union ◽  
Building Stock ◽  
Ground Source Heat Pumps ◽  
Emission Reductions ◽  
Heating Systems ◽  
Ground Source

To mitigate the effects of climate change, the European Union calls for major carbon emission reductions in the building sector through a deep renovation of the existing building stock. This study examines the cost-effective energy retrofit measures in Finnish detached houses. The Finnish detached house building stock was divided into four age classes according to the building code in effect at the time of their construction. Multi-objective optimization with a genetic algorithm was used to minimize the life cycle cost and CO2 emissions in each building type for five different main heating systems (district heating, wood/oil boiler, direct electric heating, and ground-source heat pump) by improving the building envelope and systems. Cost-effective emission reductions were possible with all heating systems, but especially with ground-source heat pumps. Replacing oil boilers with ground-source heat pumps (GSHPs), emissions could be reduced by 79% to 92% across all the studied detached houses and investment levels. With all the other heating systems, emission reductions of 20% to 75% were possible. The most cost-effective individual renovation measures were the installation of air-to-air heat pumps for auxiliary heating and improving the thermal insulation of external walls.

scholarly journals Ground-Source Heat Pumps with Horizontal Heat Exchangers for Space Cooling in the Hot Tropical Climate of Thailand

Energies ◽  
2019 ◽  
Vol 12 (7) ◽  
pp. 1274 ◽  
Author(s):  
Arif Widiatmojo ◽  
Sasimook Chokchai ◽  
Isao Takashima ◽  
Yohei Uchida ◽  
Kasumi Yasukawa ◽  
...  
Keyword(s):  
Economic Growth ◽  
Heat Pump ◽  
Heat Exchangers ◽  
Life Cycle Cost ◽  
Heat Pumps ◽  
Ground Source Heat Pump ◽  
Ground Source Heat Pumps ◽  
Air Source Heat Pump ◽  
Ground Source ◽  
Space Cooling

The cooling of spaces in tropical regions, such as Southeast Asia, consumes a lot of energy. Additionally, rapid population and economic growth are resulting in an increasing demand for space cooling. The ground-source heat pump has been proven a reliable, cost-effective, safe, and environmentally-friendly alternative for cooling and heating spaces in various countries. In tropical countries, the presumption that the ground-source heat pump may not provide better thermal performance than the normal air-source heat pump arises because the difference between ground and atmospheric temperatures is essentially low. This paper reports the potential use of a ground-source heat pump with horizontal heat exchangers in a tropical country—Thailand. Daily operational data of two ground-source heat pumps and an air-source heat pump during a two-month operation are analyzed and compared. Life cycle cost analysis and CO2 emission estimation are adopted to evaluate the economic value of ground-source heat pump investment and potential CO2 reduction through the use of ground-source heat pumps, in comparison with the case for air-source heat pumps. It was found that the ground-source heat pumps consume 17.1% and 18.4% less electricity than the air-source heat pump during this period. Local production of heat pumps and heat exchangers, as well as rapid regional economic growth, can be positive factors for future ground-source heat pump application, not only in Thailand but also southeast Asian countries.

An Analytical Optimization Algorithm for Wind Energy Coupled GSHP Systems for Sustainable Building HVAC

2003 ◽  
Author(s):  
Birol I. Kilkis
Keyword(s):  
Optimization Algorithm ◽  
Alternative Energy ◽  
Cost Effective ◽  
Heat Pumps ◽  
Energy Resources ◽  
Ground Source Heat Pumps ◽  
Sustainable Building ◽  
Combined Application ◽  
Heating And Cooling ◽  
Ground Source

Effective utilization of low-enthalpy energy resources in heating, ventilating, and air-conditioning (HVAC) of sustainable buildings require a careful optimization to assure the most economical coupling of HVAC systems with low-enthalpy energy resources. In one of the two separate prior studies an optimization algorithm for the optimal coupling of heat pumps and radiant panel heating and cooling systems was developed. In the second prior study an optimization algorithm for driving ground source heat pumps with wind turbines was developed. In this study these two algorithms were combined for a compound utilization of alternative energy resources. This paper describes the optimization algorithms, emphasizes their importance in achieving a cost effective combined application, and discusses the results obtained from the examples given.

scholarly journals Optimization of emission reducing energy retrofits in Finnish apartment buildings

2019 ◽  
Vol 111 ◽  
pp. 03002 ◽  
Author(s):  
Janne Hirvonen ◽  
Juha Jokisalo ◽  
Juhani Heljo ◽  
Risto Kosonen
Keyword(s):  
Heat Pump ◽  
Life Cycle Cost ◽  
District Heating ◽  
Cost Savings ◽  
Cost Effective ◽  
Energy Performance ◽  
Heat Pumps ◽  
Apartment Buildings ◽  
Ground Source ◽  
Reduce Emissions

This study examined the cost-optimality of energy renovation on Finnish apartment buildings of different ages, built according to different energy performance requirements. Multi-objective optimization was utilized to minimize both CO2 emissions and life cycle cost (LCC). IDA-ICE simulations were performed to obtain the hourly heating demand of the buildings. Four building age classes and three heating systems (district heating, exhaust air heat pump and ground-source heat pump) were separately optimized. With district heating, it was possible to reduce emissions by 11%, while also reducing LCC. With heat pumps cost-savings could be achieved while reducing emissions by over 49%. With maximal (not cost-effective) investments, emissions could be reduced by more than 70% in all examined cases. In all cases, the cheapest solutions included solar electricity and sewage heat recovery. In old buildings, window upgrades and additional roof insulation were cost-effective. In new buildings, demand-based ventilation was included in all optimal solutions.

scholarly journals Modular split-type heat pump with compact and silent façade-integrated outdoor unit

2021 ◽  
Vol 246 ◽  
pp. 06008
Author(s):  
William Monteleone ◽  
Fabian Ochs ◽  
Christof Drexel ◽  
Mattias Rothbacher
Keyword(s):  
Modular Design ◽  
Cost Effective ◽  
Heat Pumps ◽  
Building Envelope ◽  
Heating Systems ◽  
Key Technologies ◽  
Building Physics ◽  
High Degree ◽  
High Density Housing ◽  
High Share

For future buildings (nZEBs according to EPBD) efficient and cost-effective heating systems with a high share of renewable energy ar0e1 r1equired. Heat pumps (HP) are considered as one of the key technologies in the building sector. However, in particular in high-density housing areas, source exploitation is strongly limited. Accordingly, the market in Austria does not currently provide real alternatives to apartment gas or electric boilers. Split type HPs with low power can be made compact and cost effective and thus offer new possibilities. However, split type HPs represent a real alternative only if the acceptance for them can be improved by means of improved modularity, design, architectural attractive integration in the building envelope and reduced sound emissions. The goal of the Austrian FFG research project FitNeS is the development and optimization of modular split HPs with compact and silent façade-integrated outdoor units. The outstanding features of the concept are a modular design with a high degree of prefabrication and representing a visually and architectonically attractive, economic and sustainable solution for both new constructions and renovations. Different concepts of façade-integrated outdoor units will be developed and evaluated with regard to design, façade construction, accessibility (for maintenance), building physics, efficiency, etc. on the basis of the technical and non-technical boundary conditions.

scholarly journals Energy Retrofitting Effects on the Energy Flexibility of Dwellings

Energies ◽  
2019 ◽  
Vol 12 (14) ◽  
pp. 2788 ◽  
Author(s):  
Francesco Mancini ◽  
Benedetto Nastasi
Keyword(s):  
Energy Demand ◽  
Production Systems ◽  
Residential Building ◽  
Energy Transition ◽  
Cost Effective ◽  
Heat Pumps ◽  
Building Envelope ◽  
Hot Water ◽  
Building Stock ◽  
Residential Building Stock

Electrification of the built environment is foreseen as a main driver for energy transition for more effective, electric renewable capacity firming. Direct and on-time use of electricity is the best way to integrate them, but the current energy demand of residential building stock is often mainly fuel-based. Switching from fuel to electric-driven heating systems could play a key role. Yet, it implies modifications in the building stock due to the change in the temperature of the supplied heat by new heat pumps compared to existing boilers and in power demand to the electricity meter. Conventional energy retrofitting scenarios are usually evaluated in terms of cost-effective energy saving, while the effects on the electrification and flexibility are neglected. In this paper, the improvement of the building envelope and the installations of electric-driven space heating and domestic hot water production systems is analyzed for 419 dwellings. The dwellings database was built by means of a survey among the students attending the Faculty of Architecture at Sapienza University of Rome. A set of key performance indicators were selected for energy and environmental performance. The changes in the energy flexibility led to the viable participation of all the dwellings to a demand response programme.

scholarly journals Novel Methodology toward Nearly Zero Energy Building (NZEB) Renovation: Cost-Effective Balance Approach as a Pre-Step to Cost-Optimal Life Cycle Cost Assessment

2021 ◽  
Vol 11 (9) ◽  
pp. 4141
Author(s):  
Yovko Ivanov Antonov ◽  
Per Kvols Heiselberg ◽  
Michal Zbigniew Pomianowski
Keyword(s):  
Life Cycle Cost ◽  
Energy Savings ◽  
Cost Effective ◽  
The European Union ◽  
Zero Energy ◽  
Building Stock ◽  
Existing Building ◽  
Zero Energy Building ◽  
Selection Of

Reaching environmental targets set by the European Union (EU) requires a constant renovation of the existing building stock to nearly Zero Energy Buildings (NZEB) in a cost-optimal manner. Studies show that the renovation rate of the existing building stock is more than two times less than what is necessary to reach the targets. Furthermore, the majority of performed renovations across the EU reach just a small amount of energy savings, whereas NZEB renovations are rarely achieved. This paper proposes a methodology for the evaluation of renovation measures, aiming to provide decision support related to the selection of what to renovate and to what extent. The proposed method is rooted in the well-established cost-optimal methodology, yet it suggests a pre-step to package evaluation. This is done by means of a simplified cost-effective parameter (CEP), linking cost, lifetime, and energy savings. The methodology is demonstrated using a case study building in Denmark. The results show that the CEP provides good grounds for the compilation of single actions to packages. Further developments could focus on the sensitivity of the model inputs and integration of additional evaluation parameters to cost, such as environmental, architectural, comfort, risk, etc.

Cooling Towers as Supplemental Heat Rejection Systems in Ground Source Heat Pumps for Residential Houses in Texas and Other Semi-Arid Regions

2012 ◽  
Author(s):  
Siddharth Balasubramanian ◽  
Jonathan Gaspredes ◽  
Tess J. Moon ◽  
Glenn Y. Masada
Keyword(s):  
Heat Pump ◽  
Cooling Tower ◽  
Cost Effective ◽  
Heat Pumps ◽  
Residential Home ◽  
Test Case ◽  
Pump Efficiency ◽  
Ground Source Heat Pump ◽  
Ground Source Heat Pumps ◽  
Ground Source

Simulation results from a hybrid ground source heat pump model are presented for a residential home that integrates a compact cooling tower into an existing ground source heat pump model. The tower is introduced to assess its impact on the operational and economic performance over that of a GSHP alone. Metrics include initial and lifetime operational costs, ground heating effects, heat pump efficiency, and ability to control the temperature of the conditioned space. A single story, 195 m2 house located in Austin, Texas is used as a cooling-dominated test case. Simulations spanning 10-years of operation show that adding the cooling tower is cost effective, but more importantly, it extends the lifetime of the borehole system and maintains the heat pump efficiencies at high levels.

Sign in / Sign up

Export Citation Format

Share Document