scholarly journals Topology Design of an Offshore Wind Farm with Multiple Types of Wind Turbines in a Circular Layout

Energies ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 556
Author(s):  
Siyu Tao ◽  
Andrés Feijóo ◽  
Jiemin Zhou ◽  
Gang Zheng
Keyword(s):  
Wind Turbines ◽  
Deep Water ◽  
Manufacturing Industry ◽  
Wind Farm ◽  
Wind Farms ◽  
Topology Design ◽  
Offshore Wind ◽  
Wind Condition ◽  
Three Dimensional Model ◽  
Whale Optimization

The advances in the manufacturing industry make it possible to install wind turbines (WTs) with large capacities in offshore wind farms (OWFs) in deep water areas far away from the coast where there are the best wind resources. This paper proposes a novel method for OWF optimal planning in deep water areas with a circular boundary. A three-dimensional model of the planning area’s seabed is established in a cylindrical coordinate. Two kinds of WTs with capacities of 4 and 8 MW respectively are supposed to be mixed-installed in that area. Baseline cases are analyzed and compared to verify the superiority of a circular layout pattern and the necessity of a non-uniform installation. Based on the establishment of the optimization model and a realistic wind condition, a novel heuristic algorithm, i.e., the whale optimization algorithm (WOA), is applied to solve the problem to obtain the type selection and coordinates of WTs simultaneously. Finally, the feasibility and advantages of the proposed scheme are identified and discussed according to the simulation results.

scholarly journals Floating Offshore Vertical Axis Wind Turbines: Opportunities, Challenges and Way Forward

Energies ◽  
2021 ◽  
Vol 14 (23) ◽  
pp. 8000
Author(s):  
Abel Arredondo-Galeana ◽  
Feargal Brennan
Keyword(s):  
Wind Turbines ◽  
Deep Water ◽  
Wind Farm ◽  
Structural Integrity ◽  
Wind Farms ◽  
Vertical Axis ◽  
Offshore Wind ◽  
Small Scale ◽  
Offshore Wind Farms ◽  
Vertical Axis Wind Turbines

The offshore wind sector is expanding to deep water locations through floating platforms. This poses challenges to horizontal axis wind turbines (HAWTs) due to the ever growing size of blades and floating support structures. As such, maintaining the structural integrity and reducing the levelised cost of energy (LCoE) of floating HAWTs seems increasingly difficult. An alternative to these challenges could be found in floating offshore vertical axis wind turbines (VAWTs). It is known that VAWTs have certain advantages over HAWTs, and in fact, some small-scale developers have successfully commercialised their onshore prototypes. In contrast, it remains unknown whether VAWTs can offer an advantage for deep water floating offshore wind farms. Therefore, here we present a multi-criteria review of different aspects of VAWTs to address this question. It is found that wind farm power density and reliability could be decisive factors to make VAWTs a feasible alternative for deep water floating arrays. Finally, we propose a way forward based on the findings of this review.

scholarly journals Floating Performance of a Composite Bucket Foundation with an Offshore Wind Tower during Transportation

Energies ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 882 ◽  
Author(s):  
Hongyan Ding ◽  
Zuntao Feng ◽  
Puyang Zhang ◽  
Conghuan Le ◽  
Yaohua Guo
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Wind Farm ◽  
Wind Farms ◽  
Interaction Force ◽  
Offshore Wind ◽  
Construction Technique ◽  
Bucket Foundation ◽  
Offshore Wind Turbines ◽  
One Step

The composite bucket foundation (CBF) for offshore wind turbines is the basis for a one-step integrated transportation and installation technique, which can be adapted to the construction and development needs of offshore wind farms due to its special structural form. To transport and install bucket foundations together with the upper portion of offshore wind turbines, a non-self-propelled integrated transportation and installation vessel was designed. In this paper, as the first stage of applying the proposed one-step integrated construction technique, the floating behavior during the transportation of CBF with a wind turbine tower for the Xiangshui wind farm in the Jiangsu province was monitored. The influences of speed, wave height, and wind on the floating behavior of the structure were studied. The results show that the roll and pitch angles remain close to level during the process of lifting and towing the wind turbine structure. In addition, the safety of the aircushion structure of the CBF was verified by analyzing the measurement results for the interaction force and the depth of the liquid within the bucket. The results of the three-DOF (degree of freedom) acceleration monitoring on the top of the test tower indicate that the wind turbine could meet the specified acceleration value limits during towing.

Floating Offshore Wind Turbines: Responses in a Seastate Pareto Optimal Designs and Economic Assessment

2008 ◽  
Author(s):  
Paul Sclavounos ◽  
Christopher Tracy ◽  
Sungho Lee
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Wind Farm ◽  
Wind Farms ◽  
Economic Assessment ◽  
Offshore Wind ◽  
Pareto Optimal ◽  
Mooring System ◽  
Floating Structure ◽  
Water Depths

Wind is the fastest growing renewable energy source, increasing at an annual rate of 25% with a worldwide installed capacity of 74 GW in 2007. The vast majority of wind power is generated from onshore wind farms. Their growth is however limited by the lack of inexpensive land near major population centers and the visual pollution caused by large wind turbines. Wind energy generated from offshore wind farms is the next frontier. Large sea areas with stronger and steadier winds are available for wind farm development and 5MW wind turbine towers located 20 miles from the coastline are invisible. Current offshore wind turbines are supported by monopoles driven into the seafloor at coastal sites a few miles from shore and in water depths of 10–15m. The primary impediment to their growth is visual pollution and the prohibitive cost of seafloor mounted monopoles in larger water depths. This paper presents a fully coupled dynamic analysis of floating wind turbines that enables a parametric design study of floating wind turbine concepts and mooring systems. Pareto optimal designs are presented that possess a favorable combination of nacelle acceleration, mooring system tension and displacement of the floating structure supporting a five megawatt wind turbine. All concepts are selected so that they float stably while in tow to the offshore wind farm site and prior to their connection to the mooring system. A fully coupled dynamic analysis is carried out of the wind turbine, floater and mooring system in wind and a sea state based on standard computer programs used by the offshore and wind industries. The results of the parametric study are designs that show Pareto fronts for mean square acceleration of the turbine versus key cost drivers for the offshore structure that include the weight of the floating structure and the static plus dynamic mooring line tension. Pareto optimal structures are generally either a narrow deep drafted spar, or a shallow drafted barge ballasted with concrete. The mooring systems include both tension leg and catenary mooring systems. In some of the designs, the RMS acceleration of the wind turbine nacelle can be as low as 0.03 g in a sea state with a significant wave height of ten meters and water depths of up to 200 meters. These structures meet design requirements while possessing a favorable combination of nacelle accleration, total mooring system tension and weight of the floating structure. Their economic assessment is also discussed drawing upon a recent financial analysis of a proposed offshore wind farm.

Design Analysis of Critical Concepts Influence Wind Farm Production and Efficiency

2018 ◽  
Vol 40 ◽  
pp. 136-150
Author(s):  
Naima Charhouni ◽  
Mohammed Sallaou ◽  
Khalifa Mansouri
Keyword(s):  
Wind Turbines ◽  
Wind Farm ◽  
Production Efficiency ◽  
Wind Farms ◽  
Power Production ◽  
Separation Distance ◽  
Design Analysis ◽  
Offshore Wind ◽  
Farm Production ◽  
Wind Farm Design

Wind farm deficiency caused by wake turbine interactions has received an important attention by scientific researchers in recent years. However the quality of power production is strongly depends on wind turbines location from others. In this regard, this paper proposes a comprehensive design analysis of crucial concepts that aid to plan for an efficient wind farm design. Indeed, the wake modeling problem is addressed in this analysis by comparing three models with available measured data gotten from literature. A configuration of wind turbines placement within the offshore wind farm as a function of separation distance is investigated in this study considering four wind farms layout. In addition to these elements, four rotor diameters size are evaluated as critical concept for wind turbine selection and production .The results obtained demonstrate that it is complicated to make a balance between three conflicted objectives related to the power production, efficiency and surface land area required for wind farm as a function of these crucial concepts.

Linear Stability Control of Offshore Wind Turbines

2010 ◽  
Author(s):  
Christine A. Mecklenborg ◽  
Philipp Rouenhoff ◽  
Dongmei Chen
Keyword(s):  
Wind Turbines ◽  
Deep Water ◽  
Fossil Fuels ◽  
Wind Farms ◽  
Stability Control ◽  
Offshore Wind ◽  
Wave Forces ◽  
Offshore Wind Farms ◽  
Offshore Wind Turbines ◽  
Strong Winds

Offshore wind farms in deep water are becoming an attractive prospect for harnessing renewable energy and reducing dependence on fossil fuels. One area of major concern with offshore wind turbines is stability control. The same strong winds that give deep water turbines great potential for energy capture also pose a threat to stability, along with potentially strong wave forces. We examine development of state space controllers for active stabilization of a spar-buoy floating turbine. We investigate linear state feedback with a state observer and evaluate response time and disturbance rejection of decoupled SISO controllers.

Harmonizing the Mooring System Reliability of Multiline Anchor Wind Farms

2021 ◽  
Vol 7 (4) ◽  
Author(s):  
Spencer T. Hallowell ◽  
Sanjay R. Arwade ◽  
Brian D. Diaz ◽  
Charles P. Aubeny ◽  
Casey M. Fontana ◽  
...  
Keyword(s):  
Wind Turbines ◽  
System Reliability ◽  
Wind Farm ◽  
Wind Farms ◽  
Offshore Wind ◽  
Line System ◽  
Offshore Wind Turbines ◽  
Anchor System ◽  
Floating Offshore Wind Turbines ◽  
Additional Safety

Abstract One of many barriers to the deployment of floating offshore wind turbines is the high cost of vessel time needed for soil investigations and anchor installation. A multiline anchor system is proposed in which multiple floating offshore wind turbines (FOWTs) are connected to a single caisson. The connection of multiple FOWTs to a single anchor introduces interconnectedness throughout the wind farm. Previous work by the authors has shown that this interconnectedness reduces the reliability of the FOWT below an acceptable level when exposed to survival loading conditions. To combat the reduction in system reliability an overstrength factor (OSF) is applied to the anchors functioning as an additional safety factor. For a 100 turbine wind farm, single-line system reliabilities can be achieved using the multiline system with an OSF of 1.10, a 10% increase in multiline anchor safety factors for all anchors in a farm.

scholarly journals The Relation between Migratory Activity of Pipistrellus Bats at Sea and Weather Conditions Offers Possibilities to Reduce Offshore Wind Farm Effects

Animals ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 3457
Author(s):  
Robin Brabant ◽  
Yves Laurent ◽  
Bob Jonge Poerink ◽  
Steven Degraer
Keyword(s):  
Wind Turbines ◽  
Wind Farm ◽  
Negative Relationship ◽  
Wind Farms ◽  
Weather Conditions ◽  
Seasonal Migration ◽  
Offshore Wind ◽  
Offshore Wind Farm ◽  
Offshore Wind Farms ◽  
Migratory Activity

Bats undertaking seasonal migration between summer roosts and wintering areas can cross large areas of open sea. Given the known impact of onshore wind turbines on bats, concerns were raised on whether offshore wind farms pose risks to bats. Better comprehension of the phenology and weather conditions of offshore bat migration are considered as research priorities for bat conservation and provide a scientific basis for mitigating the impact of offshore wind turbines on bats. This study investigated the weather conditions linked to the migratory activity of Pipistrellus bats at multiple near- and offshore locations in the Belgian part of the North Sea. We found a positive relationship between migratory activity and ambient temperature and atmospheric pressure and a negative relationship with wind speed. The activity was highest with a wind direction between NE and SE, which may favor offshore migration towards the UK. Further, we found a clear negative relationship between the number of detections and the distance from the coast. At the nearshore survey location, the number of detections was up to 24 times higher compared to the offshore locations. Our results can support mitigation strategies to reduce offshore wind farm effects on bats and offer guidance in the siting process of new offshore wind farms.

Modeling underwater sound from future offshore wind farms southeast of Gran Canaria Island

2021 ◽  
Author(s):  
Melania Cubas Armas ◽  
Alonso Hernández-Guerra ◽  
Eric Delory ◽  
David Dellong ◽  
Verónica Caínzos ◽  
...  
Keyword(s):  
Wind Turbines ◽  
Marine Mammals ◽  
Wind Farm ◽  
Transmission Loss ◽  
Wind Farms ◽  
Clean Energy ◽  
Offshore Wind ◽  
Acoustic Model ◽  
Offshore Wind Farms ◽  
Gran Canaria

<p>The European Union aims to achieve carbon neutrality by 2050. Therefore, it is crucial to increase the use of renewable energy. One clean energy source is the wind, and during the last decades, several countries have developed wind farms, not only on land but also in the ocean. Most offshore wind farms have been installed in shallow waters; however, recently, open ocean offshore floating wind farms are being installed in deep waters due to stronger and steadier wind occurring in these areas. Thus, offshore wind turbines are a potential new source of underwater noise. Noise can propagate underwater having the potential to affect marine mammals and fish, among others. Floating wind turbines are known to reduce the installation and decommissioning noise in contrast to fixed-bottom turbines but, nevertheless, the noise produced by the operation of the turbines and the anchoring systems have been scarcely studied, and it is still unknown whether added noise could significantly affect behavior or even hearing capacity in the long term. In the framework of the JONAS European project we anticipate a regional use case with a future installation of a commercial offshore wind farm, to determine how noise would propagate in the region, from installation to operation, and potentially impact (or not) local fauna, focusing initially on mammal groups. In this study, we use the RAM model (Range-dependent acoustic model) which is a parabolic equation (PE) code that calculates the propagation of sound in the ocean using the split-step Padé solution. RAM needs information about the temperature and salinity in the water column to calculate sound speed profiles, as well as the bathymetry and a geo-acoustic model of the bottom. It returns the transmission loss depending on the depth and distance to the source. We have applied the RAM model to an area located in the southeast of Gran Canaria Island, where a plan for a floating wind farm is under consideration. Results and suggestions about the negative impact on marine mammals known to live in this location are presented.</p>

scholarly journals An equivalent modeling method for Offshore Wind Farms based on fault characteristics analysis

2019 ◽  
Vol 107 ◽  
pp. 01004
Author(s):  
Haiyan Tang ◽  
Guanglei Li ◽  
Linan Qu ◽  
Yan Li
Keyword(s):  
Wind Turbines ◽  
Wind Farm ◽  
Wind Farms ◽  
Modeling Method ◽  
Operating Conditions ◽  
Offshore Wind ◽  
Equivalent Model ◽  
Offshore Wind Farm ◽  
Offshore Wind Farms ◽  
Characteristics Analysis

A large offshore wind farm usually consists of dozens or even hundreds of wind turbines. Due to the limitation of the simulation scale, it is necessary to develop an equivalent model of offshore wind farms for power system studies. At present, the aggregation method is widely adopted for wind farm equivalent modeling. In this paper, the topology, electrical parameters, operating conditions and individual turbine characteristics of the offshore wind farms are taken into consideration. Firstly, the output power distribution of offshore wind farm, the voltage distribution of the collector system and the fault ride-through characteristics of wind turbines are analyzed. Then, a dynamic equivalent modeling method for offshore wind farms is developed based on the fault characteristics analysis. Finally, the proposed method is validated through time-domain simulation.

scholarly journals An offshore wind farm energy injection mastering using aerodynamic and kinetic control strategies

2018 ◽  
Vol 61 ◽  
pp. 00002 ◽  
Author(s):  
Djamel Ikni ◽  
Ahmed Ousmane Bagre ◽  
Mamadou Bailo Camara ◽  
Brayima Dakyo
Keyword(s):  
Power Quality ◽  
Wind Turbines ◽  
Wind Farm ◽  
Control Strategies ◽  
Wind Farms ◽  
Optimal Strategies ◽  
Offshore Wind ◽  
Offshore Wind Farm ◽  
Energy Storage Devices ◽  
Storage Devices

The injection of wind farm production into a grid, needs optimal strategies for energy transfer management. Usually, the power produced by the wind farms does not fulfil all the grid code requirements. The main problem is generally based on the way to reduce the impacts of power production fluctuations on the grid voltage and its frequency. To solve this problem, some authors suggest the use of an interface such as energy storage devices in order to compensate the wind power fluctuations. In fact, the storage devices installed between the wind farm and the grid can improve the power quality in terms of stability but in other hand the size and the cost of the system can be increased. In this paper, two solutions have been proposed in case the power quality produced by the wind farm is out of the grid code requirements. The improvement of the energy quality of an offshore wind farm without storage and connected to the grid is discussed. The proposed solution is to operate the wind turbines with a reserve of power. To distribute this reserve equitably among wind turbines, a proportional distribution algorithms has been developed. The results obtained show clearly the effectiveness of the strategy.

Sign in / Sign up

Export Citation Format

Share Document