scholarly journals Hot Water Extraction: Short Rotation Willow, Mixed Hardwoods, and Process Considerations

Energies ◽  
2020 ◽  
Vol 13 (8) ◽  
pp. 2071
Author(s):  
Christopher D. Wood ◽  
Thomas E. Amidon ◽  
Timothy A. Volk ◽  
Rachel M. Emerson

Short rotation woody crops (SRWC) like shrub willow are highly productive biomass resources of interest for energy and fuel applications. Hot water extraction (HWE) as an upgrading tool to enable the use of willow biomass in pellet applications has been proposed, and is of increasing interest. This study treats willow and mixes of willow and conventional mixed hardwood feedstock with HWE in a tumbling laboratory reactor to elucidate the effects of time, temperature, feedstock mixes, and other process considerations (water:biomass ratio, presteaming, counter-current processing) on mass removals and other extraction outcomes (e.g., sugar, acetate, and furan yields). Results demonstrated alignment of extraction outcomes with P-factor from 155 °C to 175 °C, with a good compromise of removed mass and co-product potential in the range from 575–800 P-factor. The preferred condition was chosen as 575 P-factor. HWE of mixes of willow and hardwood feedstocks showed a linear response of extraction outcomes to willow:hardwood ratios. Testing of water:biomass ratios demonstrated that this is a significant consideration, with each outcome being affected somewhat differently, and indicating that HWE is more diffusion dependent than expected. Presteaming shows little to no effect on extraction outcomes, while multi-stage cooks simulating counter-current operation indicate a significant potential value in counter-current extraction.

2017 ◽  
Vol 107 ◽  
pp. 299-304 ◽  
Author(s):  
Paul C. Tarves ◽  
Michelle J. Serapiglia ◽  
Charles A. Mullen ◽  
Akwasi A. Boateng ◽  
Timothy A. Volk

2011 ◽  
Vol 291-294 ◽  
pp. 1339-1343
Author(s):  
Wen Bo Zhang ◽  
Hong Rui Li ◽  
Jun Tao ◽  
Bing Bing Dong

The research in this paper optimized the extraction technique of lentinan with ultrasonic assistant method on the basis of hot water extraction technique, and investigated the promoting function of ultrasound to polysaccharides extraction. Extraction condition was selected by means of orthogonal experimental design, four factors and three levels L9(34), after key elements were respectively chosen through single factor experiments. Comparison between optimal extraction parameters of two method, hot water extraction technique and ultrasonic assistant extraction technique, showed decreased extraction temperature and significantly shortened extraction time, which existed in the second means, improved the extraction efficiency. Lentinus edodes polysaccharide extracted with ultrasonic assistant technique, the extraction rate and polysaccharide content percentage increased 6.22% and 8.66% respectively, comparative to which extracted with hot water extraction technique.


Holzforschung ◽  
2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Nacera Benouadah ◽  
Andrey Pranovich ◽  
Djamel Aliouche ◽  
Jalel Labidi ◽  
Stefan Willför

AbstractThe effectiveness of pressurized hot-water extraction conditions for obtaining galactoglucomannans (GGMs) from Pinus halepensis suitable for applications like coatings and films packaging was investigated. For this purpose, high molar masses with high yields are required, presenting a serious challenge for hot-water extraction processes. The extraction of GGMs was carried out in an accelerated solvent extractor (ASE) and the isolation was performed by precipitation in ethanol. Three temperatures in the range 160–180 °C and five extraction times 5–90 min were tested in order to optimize extraction parameters of GGMs, avoiding thermal and chemical degradation in hot-water. Total dissolved solids (TDS) were determined gravimetrically after freeze-drying and weight average molar masses (Mw) were determined by high-performance size exclusion chromatography (HPSEC). Total non-cellulosic carbohydrates were determined by gas chromatography (GC) after acid methanolysis. Free monomers were additionally analyzed by GC. Lignin in water extracts was measured by an ultraviolet (UV) method. Acetic acid was determined after alkaline hydrolysis of acetyl groups and analyzed by HPSEC. The main parameters influencing the extraction processes of the GGMs, namely, extraction time and temperature were studied. Optimal extraction parameters of GGMs were identified at 170 °C and 20 min extraction time, with average Mw of extracted fraction of 7 kDa leading to a GGM yield of approximately 56 ${\text{mgg}}_{\text{o}.\text{d}.\text{m}}^{-1}$, corresponding to 6% on dry wood basis.


Fitoterapia ◽  
2018 ◽  
Vol 126 ◽  
pp. 65-68 ◽  
Author(s):  
Bianca J. Deans ◽  
Wesley J. Olivier ◽  
David Girbino ◽  
Alex C. Bissember ◽  
Jason A. Smith

2017 ◽  
Vol 241 ◽  
pp. 120-126 ◽  
Author(s):  
Joanna Wojtasz-Mucha ◽  
Merima Hasani ◽  
Hans Theliander

Sign in / Sign up

Export Citation Format

Share Document