scholarly journals Correlation between Large-Scale Streamwise Velocity Features and the Height of Coherent Vortices in a Turbulent Boundary Layer

Fluids ◽  
2021 ◽  
Vol 6 (8) ◽  
pp. 286
Author(s):  
Shaurya Shrivastava ◽  
Theresa Saxton-Fox
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Large Scale ◽  
Streamwise Velocity ◽  
Wake Region ◽  
Strong Negative Correlation ◽  
Vortex Model ◽  
Image Velocimetry ◽  
Coherent Vortices ◽  
Conditional Averaging

The preferential organisation of coherent vortices in a turbulent boundary layer in relation to local large-scale streamwise velocity features was investigated. Coherent vortices were identified in the wake region using the Triple Decomposition Method (originally proposed by Kolář) from 2D particle image velocimetry (PIV) data of a canonical turbulent boundary layer. Two different approaches, based on conditional averaging and quantitative statistical analysis, were used to analyze the data. The large-scale streamwise velocity field was first conditionally averaged on the height of the detected coherent vortices and a change in the sign of the average large scale streamwise fluctuating velocity was seen depending on the height of the vortex core. A correlation coefficient was then defined to quantify this relationship between the height of coherent vortices and local large-scale streamwise fluctuating velocity. Both of these results indicated a strong negative correlation in the wake region of the boundary layer between vortex height and large-scale velocity. The relationship between vortex height and full large-scale velocity isocontours was also studied and a conceptual model based on the findings of the study was proposed. The results served to relate the hairpin vortex model of Adrian et al. to the scale interaction results reported by Mathis et al., and Chung and McKeon.

Large-scale motion in the intermittent region of a turbulent boundary layer

1970 ◽  
Vol 41 (2) ◽  
pp. 283-325 ◽  
Author(s):  
Leslie S. G. Kovasznay ◽  
Valdis Kibens ◽  
Ron F. Blackwelder
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Large Scale ◽  
Cross Correlation ◽  
Turbulent Regime ◽  
Conditional Sampling ◽  
Correlation Data ◽  
Measuring Techniques ◽  
Conditional Averaging ◽  
Scale Motion

The outer intermittent region of a fully developed turbulent boundary layer with zero pressure gradient was extensively explored in the hope of shedding some light on the shape and motion of the interface separating the turbulent and non-turbulent regions as well as on the nature of the related large-scale eddies within the turbulent regime. Novel measuring techniques were devised, such as conditional sampling and conditional averaging, and others were turned to new uses, such as reorganizing in map form the space-time auto- and cross-correlation data involving both the U and V velocity components as well as I, the intermittency function. On the basis of the new experimental results, a conceptual model for the development of the interface and for the entrainment of new fluid is proposed.

On the spatial organization of hairpin packets in a turbulent boundary layer at low-to-moderate Reynolds number

2018 ◽  
Vol 844 ◽  
pp. 635-668 ◽  
Author(s):  
Sichao Deng ◽  
Chong Pan ◽  
Jinjun Wang ◽  
Guosheng He
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Large Scale ◽  
Spatial Organization ◽  
Vortical Structures ◽  
Planar Velocity ◽  
Image Velocimetry ◽  
Moderate Reynolds Number ◽  
Spatio Temporal ◽  
Low Order

The present study is devoted to characterizing the coherent organization of vortical structures, which can be fitted into the paradigm of the hairpin-packet model, in the streamwise–wall-normal plane of a canonical turbulent boundary layer at $Re_{\unicode[STIX]{x1D70F}}=377{-}1093$. Proper orthogonal decomposition (POD) of the planar velocity fields measured via two-dimensional particle image velocimetry, together with a spatio-temporal coherence analysis, shows that the first four leading-order POD modes share both geometric similarity and dynamic coherence and jointly depict the downstream convection of the large-scale Q2/Q4 events, which can be regarded as the low-order imprints of the hairpin packets. A simple low-order indicator is then proposed to extract the inclined interfaces of the hairpin packets, based on which a two-point conditional correlation analysis forms a statistical picture of the spatial organization of multiple prograde vortices aligned along the interface within one packet. A saturation of the self-similar growth of the streamwise gap between two neighbouring vortices is seen. This implies a detachment of the hairpin packets from the inner layer. Both the detachment height and the saturated streamwise spacing are found to scale as $Re_{\unicode[STIX]{x1D70F}}^{1/2}$.

Experimental measurement of large-scale three-dimensional structures in a turbulent boundary layer. Part 2. Long structures

2011 ◽  
Vol 673 ◽  
pp. 218-244 ◽  
Author(s):  
DAVID J. C. DENNIS ◽  
TIMOTHY B. NICKELS
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
High Speed ◽  
Large Scale ◽  
Particle Image ◽  
Three Dimensional ◽  
Velocity Fluctuations ◽  
Taylor’S Hypothesis ◽  
Image Velocimetry ◽  
Streamwise Structures

Three-dimensional (3D) measurements of a turbulent boundary layer have been made using high-speed particle image velocimetry (PIV) coupled with Taylor's hypothesis, with the objective of characterising the very long streamwise structures that have been observed previously. The measurements show the 3D character of both low- and high-speed structures over very long volumes. The statistics of these structures are considered, as is their relationship to the important turbulence quantities. In particular, the length of the structures and their wall-normal extent have been considered and their relationship to the other components of the velocity fluctuations and the instantaneous stress.

scholarly journals Time evolution of uniform momentum zones in a turbulent boundary layer

2018 ◽  
Vol 842 ◽  
pp. 554-590 ◽  
Author(s):  
A. Laskari ◽  
R. de Kat ◽  
R. J. Hearst ◽  
B. Ganapathisubramani
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Large Scale ◽  
Small Scale ◽  
Residence Times ◽  
Time Resolved ◽  
Image Velocimetry ◽  
Measurement Plane ◽  
Very High ◽  
Flow States

Time-resolved planar particle image velocimetry was used to analyse the structuring of a turbulent boundary layer into uniform momentum zones (UMZs). The instantaneous peak-detection method employed by Adrian et al. (J. Fluid Mech., vol. 422, 2000, pp. 1–54) and de Silva et al. (J. Fluid Mech., vol. 786, 2016, pp. 309–331) is extended to account for temporal coherence of UMZs. The resulting number of zones detected appears to follow a normal distribution at any given instant. However, the extreme cases in which the number of zones is either very high or very low, are shown to be linked with two distinct flow states. A higher than average number of zones is associated with a large-scale $Q2$ event in the log region which creates increased small-scale activity within that region. Conversely, a low number of zones corresponds to a large-scale $Q4$ event in the log region and decreased turbulent activity away from the wall. The residence times, within the measurement plane, of zones belonging to the latter scenario are shown to be on average four times larger than those of zones present during higher than average zone structuring states. For both cases, greater residence times are observed for zones of higher momentum that are generally closer to the free stream.

On the wall structure of the turbulent boundary layer

1976 ◽  
Vol 76 (1) ◽  
pp. 89-112 ◽  
Author(s):  
R. F. Blackwelder ◽  
R. E. Kaplan
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Large Scale ◽  
Reynolds Shear Stress ◽  
Streamwise Velocity ◽  
Mean Value ◽  
Wall Structure ◽  
Spanwise Direction ◽  
Normal Velocity ◽  
Conditional Sampling

The wall structure of the turbulent boundary layer was examined using hot-wire rakes and conditional sampling techniques. Instantaneous velocity measurements indicate a high degree of coherence over a considerable area in the direction normal to the wall. Aty+= 15, there is some evidence of large-scale correlation in the spanwise direction, but almost no indication of the streamwise streaks that exist in the lower regions of the boundary layer. Conditional sampling showed that the normal velocity is directed outwards in regions of strong stream-wise-momentum deficit, and inwards when the streamwise velocity exceeds its mean value. The conditionally averaged Reynolds shear stress was approximately an order of magnitude greater than its conventionally averaged value and decayed slowly downstream.

scholarly journals Local transport of passive scalar released from a point source in a turbulent boundary layer

2018 ◽  
Vol 846 ◽  
pp. 292-317 ◽  
Author(s):  
K. M. Talluru ◽  
J. Philip ◽  
K. A. Chauhan
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Large Scale ◽  
Reynolds Shear Stress ◽  
Phase Relationship ◽  
Passive Scalar ◽  
Streamwise Velocity ◽  
Concentration Fluctuations ◽  
Normal Velocity ◽  
Velocity Fluctuations

Simultaneous measurements of streamwise velocity ($\tilde{U}$) and concentration ($\tilde{C}$) for a horizontal plume released at eight different vertical locations within a turbulent boundary layer are discussed in this paper. These are supplemented by limited simultaneous three-component velocity and concentration measurements. Results of the integral time scale ($\unicode[STIX]{x1D70F}_{c}$) of concentration fluctuations across the width of the plume are presented here for the first time. It is found that$\unicode[STIX]{x1D70F}_{c}$has two distinct peaks: one closer to the plume centreline and the other at a vertical distance of plume half-width above the centreline. The time-averaged streamwise concentration flux is found to be positive and negative, respectively, below and above the plume centreline. This behaviour is a resultant of wall-normal velocity fluctuations ($w$) and Reynolds shear stress ($\overline{uw}$). Confirmation of these observations is found in the results of joint probability density functions of$u$(streamwise velocity fluctuations) and$\tilde{C}$as well as that of$w$and$\tilde{C}$. Results of cross-correlation coefficient show that high- and low-momentum regions have a distinctive role in the transport of passive scalar. Above the plume centreline, low-speed structures have a lead over the meandering plume, while high-momentum regions are seen to lag behind the plume below its centreline. Further examination of the phase relationship between time-varying$u$and$c$(concentration fluctuations) via cross-spectrum analysis is consistent with this observation. Based on these observations, a phenomenological model is presented for the relative arrangement of a passive scalar plume with respect to large-scale velocity structures in the flow.

scholarly journals Turbulence structures and statistics of a supersonic turbulent boundary layer subjected to concave surface curvature

2019 ◽  
Vol 865 ◽  
pp. 60-99 ◽  
Author(s):  
Mingbo Sun ◽  
Neil D. Sandham ◽  
Zhiwei Hu
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Flat Plate ◽  
Turbulent Flows ◽  
Large Scale ◽  
Layer Structure ◽  
Outer Part ◽  
Streamwise Velocity ◽  
Budget Analysis ◽  
Concave Wall

Supersonic turbulent flows at Mach 2.7 over concave surfaces for two different radii of curvature were investigated and compared with a flat plate turbulent boundary layer using direct numerical simulations. The streamwise velocity reduces in the outer part of the boundary layer due to compression, while it increases near the wall due to curvature, with a higher shape factor for the concave cases. The near-wall spanwise streak spacing reduces compared to the flat plate, with large-scale streaks and turbulence amplification also observed. Streamwise velocity iso-surfaces and streamlines show the generation of Görtler-like vortices, consistent with significant centrifugal effects. Abundant small vortices are shown to be associated with large baroclinic production of vorticity that is caused by the density and pressure gradients that are associated with concave compression. Profiles of turbulent kinetic energy and turbulent Mach number exhibit a characteristic two-layer structure in the concave boundary layer cases. In the outer layer, turbulence is greatly amplified, whereas a local balance exists in the inner layer. Turbulent energy budget analysis shows that both production and dissipation increase near the concave wall, whereas in the outer part of the boundary layer, the production is increased and ultimately balanced by convection and turbulent transport.

Perturbing vortex packets in a turbulent boundary layer

2014 ◽  
Vol 748 ◽  
pp. 368-398 ◽  
Author(s):  
Shaokai Zheng ◽  
Ellen K. Longmire
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Particle Image ◽  
Streamwise Velocity ◽  
Downstream Location ◽  
Piv Method ◽  
Cylinder Array ◽  
Image Velocimetry ◽  
Logarithmic Region ◽  
Downstream Flow

AbstractA zero pressure gradient turbulent boundary layer of $\textit {Re}_{\tau }=2500$ was perturbed by a single spanwise array of finite cylinders mounted on the bounding surface and extending through the logarithmic region. The cylinder height was $H/\delta =0.2$ ($H^{+}=500$), where $\delta $ is the boundary layer thickness, with an aspect ratio ($AR$) (height/diameter) of four. Streamwise–spanwise ($x\text {--}y$) planes of the flow were examined by particle image velocimetry (PIV) up to $7\delta $ downstream at a wall-normal location of $z^{+}=300$ for cylinder array spacings ranging from $0.2\delta $ to $0.8\delta $. Average streamwise velocity fields showed a splitting, then merging pattern of cylinder wakes which occurred further downstream as the cylinder spacing increased. Based on measurements at the furthest downstream location, both the spanwise variation of average streamwise velocity and the Fourier content in the instantaneous fields suggested that the case with $0.6\delta $ cylinder spacing, which matched the dominant spanwise scale in the unperturbed flow, yielded the most persistent downstream flow organization. A flying PIV method was implemented to track specific packet structures over a range $-2<x/\delta <7$ with respect to the cylinder array, corresponding to a time scale of $12.4\delta /U_{\infty }$. Packets approaching the $0.2\delta $ spacing array first lost their organization but then regained it a distance $2\delta $ downstream, suggesting that a persistent outer layer organization propagated inwards into the log region. For arrays with larger spanwise spacing, approaching packets were generally redirected into the spanwise location midway between cylinders and sometimes enhanced.

Wall pressure and coherent structures in a turbulent boundary layer on a cylinder in axial flow

1995 ◽  
Vol 286 ◽  
pp. 137-171 ◽  
Author(s):  
Stephen R. Snarski ◽  
Richard M. Lueptow
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Large Scale ◽  
Streamwise Velocity ◽  
Wall Pressure ◽  
Small Scale ◽  
Fluctuating Pressure ◽  
Large Scale Structures ◽  
Transverse Curvature ◽  
Scale Structures

Measurements of wall pressure and streamwise velocity fluctuations in a turbulent boundary layer on a cylinder in an axial air flow (δ/a = 5.04, Reθ = 2870) have been used to investigate the turbulent flow structures in the cylindrical boundary layer that contribute to the fluctuating pressure at the wall in an effort to deduce the effect of transverse curvature on the structure of boundary layer turbulence. Wall pressure was measured at a single location with a subminiature electret condenser microphone, and the velocity was measured throughout a large volume of the boundary layer with a hotwire probe. Auto- and cross-spectral densities, cross-correlations, and conditional sampling of the pressure and streamwise velocity indicate that two primary groups of flow disturbances contribute to the fluctuating pressure at the wall: (i) low-frequency large-scale structures with dynamical significance across the entire boundary layer that are consistent with a pair of large-scale spanwise-oriented counter-rotating vortices and (ii) higher frequency small-scale disturbances concentrated close to the wall that are associated with the burst-sweep cycle and are responsible for the short-duration large-amplitude wall pressure fluctuations. A bidirectional relationship was found to exist between both positive and negative pressure peaks and the temporal derivative of u near the wall. Because the frequency of the large-scale disturbance observed across the boundary layer is consistent with the bursting frequency deduced from the average time between bursts, the burst-sweep cycle appears to be linked to the outer motion. A stretching of the large-scale structures very near the wall, as suggested by space-time correlation convection velocity results, may provide the coupling mechanism. Since the high-frequency disturbance observed near the wall is consistent with the characteristic frequency deduced from the average duration of bursting events, the bursting process provides the two characteristic time scales responsible for the bimodal distribution of energy near the wall. Because many of the observed structural features of the cylindrical boundary layer are similar to those observed in flat-plate turbulent boundary layers, transverse curvature appears to have little effect on the fundamental turbulent structure of the boundary layer for the moderate transverse curvature ratio used in this investigation. From differences that exist between the turbulence intensity, skewness, and spectra of the streamwise velocity, however, it appears that transverse curvature may enhance (i.e. energize) the large-scale motion owing to the reduced constraint imposed on the flow by the smaller cylindrical wall.

A uniform momentum zone–vortical fissure model of the turbulent boundary layer

2018 ◽  
Vol 858 ◽  
pp. 609-633 ◽  
Author(s):  
Juan Carlos Cuevas Bautista ◽  
Alireza Ebadi ◽  
Christopher M. White ◽  
Gregory P. Chini ◽  
Joseph C. Klewicki
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Large Scale ◽  
Friction Velocity ◽  
Layer Structure ◽  
Turbulent Channel Flow ◽  
Streamwise Velocity ◽  
Momentum Equation ◽  
Essential Elements ◽  
The Mean

Recent studies reveal that at large friction Reynolds number $\unicode[STIX]{x1D6FF}^{+}$ the inertially dominated region of the turbulent boundary layer is composed of large-scale zones of nearly uniform momentum segregated by narrow fissures of concentrated vorticity. Experiments show that, when scaled by the boundary-layer thickness, the fissure thickness is $\mathit{O}(1/\sqrt{\unicode[STIX]{x1D6FF}^{+}})$, while the dimensional jump in streamwise velocity across each fissure scales in proportion to the friction velocity $u_{\unicode[STIX]{x1D70F}}$. A simple model that exploits these essential elements of the turbulent boundary-layer structure at large $\unicode[STIX]{x1D6FF}^{+}$ is developed. First, a master wall-normal profile of streamwise velocity is constructed by placing a discrete number of fissures across the boundary layer. The number of fissures and their wall-normal locations follow scalings informed by analysis of the mean momentum equation. The fissures are then randomly displaced in the wall-normal direction, exchanging momentum as they move, to create an instantaneous velocity profile. This process is repeated to generate ensembles of streamwise velocity profiles from which statistical moments are computed. The modelled statistical profiles are shown to agree remarkably well with those acquired from direct numerical simulations of turbulent channel flow at large $\unicode[STIX]{x1D6FF}^{+}$. In particular, the model robustly reproduces the empirically observed sub-Gaussian behaviour for the skewness and kurtosis profiles over a large range of input parameters.

Sign in / Sign up

Export Citation Format

Share Document