scholarly journals Passive Exposure to Pollutants from a New Generation of Cigarettes in Real Life Scenarios

Author(s):  
Joseph Savdie ◽  
Nuno Canha ◽  
Nicole Buitrago ◽  
Susana Marta Almeida

The use of electronic cigarettes (e-cigarettes) and heat-not-burn tobacco (HNBT), as popular nicotine delivery systems (NDS), has increased among adult demographics. This study aims to assess the effects on indoor air quality of traditional tobacco cigarettes (TCs) and new smoking alternatives, to determine the differences between their potential impacts on human health. Measurements of particulate matter (PM1, PM2.5 and PM10), black carbon, carbon monoxide (CO) and carbon dioxide (CO2) were performed in two real life scenarios, in the home and in the car. The results indicated that the particle emissions from the different NDS devices were significantly different. In the home and car, the use of TCs resulted in higher PM10 and ultrafine particle concentrations than when e-cigarettes were smoked, while the lowest concentrations were associated with HNBT. As black carbon and CO are released by combustion processes, the concentrations of these two pollutants were significantly lower for e-cigarettes and HNBT because no combustion occurs when they are smoked. CO2 showed no increase directly associated with the NDS but a trend linked to a higher respiration rate connected with smoking. The results showed that although the levels of pollutants emitted by e-cigarettes and HNBT are substantially lower compared to those from TCs, the new smoking devices are still a source of indoor air pollutants.

Atmosphere ◽  
2021 ◽  
Vol 12 (12) ◽  
pp. 1682
Author(s):  
Mostafa Yuness Abdelfatah Mostafa ◽  
Hyam Nazmy Bader Khalaf ◽  
Michael V. Zhukovsky

A correlation between the mass concentration of particulate matter (PM) and the occurrence of health-related problems or diseases has been confirmed by several studies. However, little is known about indoor PM concentrations, their associated risks or their impact on health. In this work, the PM1, PM2.5 and PM10 produced by different indoor aerosol sources (candles, cooking, electronic cigarettes, tobacco cigarettes, mosquito coils and incense) are studied. The purpose is to quantify the emission characteristics of different indoor particle sources. The mass concentration, the numerical concentration, and the size distribution of PM from various sources were determined in an examination room 65 m3 in volume. Sub-micrometer particles and approximations of PM1, PM2.5 and PM10 concentrations were measured simultaneously using a diffusion aerosol spectrometer (DAS). The ultrafine particle concentration for the studied indoor aerosol sources was approximately 7 × 104 particles/cm3 (incense, mosquito coils and electronic cigarettes), 1.2 × 105 particles/cm3 for candles and cooking and 2.7 × 105 particles/cm3 for tobacco cigarettes. The results indicate that electronic cigarettes can raise indoor PM2.5 levels more than 100 times. PM1 concentrations can be nearly 55 and 30 times higher than the background level during electronic cigarette usage and tobacco cigarette burning, respectively. It is necessary to study the evaluation of indoor PM, assess the toxic potential of internal molecules and develop and test strategies to ensure the improvement of indoor air quality.


Author(s):  
Bhavya Bhargava ◽  
Sandeep Malhotra ◽  
Anjali Chandel ◽  
Anjali Rakwal ◽  
Rachit Raghav Kashwap ◽  
...  

Atmosphere ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 105
Author(s):  
Haider A. Khwaja

The five papers included in this Special Issue represent a diverse selection of contributions [...]


1990 ◽  
Vol 11 (4) ◽  
pp. 295-302 ◽  
Author(s):  
J. J. McAughey ◽  
J. N. Pritchard ◽  
A. Black

2021 ◽  
Author(s):  
Hamid Omidvarborna ◽  
Prashant Kumar

<p>The majority of people spend most of their time indoors, where they are exposed to indoor air pollutants. Indoor air pollution is ranked among the top ten largest global burden of a disease risk factor as well as the top five environmental public health risks, which could result in mortality and morbidity worldwide. The spent time in indoor environments has been recently elevated due to coronavirus disease 2019 (COVID-19) outbreak when the public are advised to stay in their place for longer hours per day to protect lives. This opens an opportunity to low-cost air pollution sensors in the real-time Spatio-temporal mapping of IAQ and monitors their concentration/exposure levels indoors. However, the optimum selection of low-cost sensors (LCSs) for certain indoor application is challenging due to diversity in the air pollution sensing device technologies. Making affordable sensing units composed of individual sensors capable of measuring indoor environmental parameters and pollutant concentration for indoor applications requires a diverse scientific and engineering knowledge, which is not yet established. The study aims to gather all these methodologies and technologies in one place, where it allows transforming typical homes into smart homes by specifically focusing on IAQ. This approach addresses the following questions: 1) which and what sensors are suitable for indoor networked application by considering their specifications and limitation, 2) where to deploy sensors to better capture Spatio-temporal mapping of indoor air pollutants, while the operation is optimum, 3) how to treat the collected data from the sensor network and make them ready for the subsequent analysis and 4) how to feed data to prediction models, and which models are best suited for indoors.</p>


2017 ◽  
Vol 125 ◽  
pp. 528-555 ◽  
Author(s):  
Brandon E. Boor ◽  
Michal P. Spilak ◽  
Jelle Laverge ◽  
Atila Novoselac ◽  
Ying Xu

Sign in / Sign up

Export Citation Format

Share Document