scholarly journals Facile Use of Silver Nanoparticles-Loaded Alumina/Silica in Nanofluid Formulations for Enhanced Catalytic Performance toward 4-Nitrophenol Reduction

Author(s):  
Rashmi Mannu ◽  
Vaithinathan Karthikeyan ◽  
Murugendrappa Malalkere Veerappa ◽  
Vellaisamy A. L. Roy ◽  
Anantha-Iyengar Gopalan ◽  
...  

The introduction of toxic chemicals into the environment can result in water pollution leading to the degradation of biodiversity as well as human health. This study presents a new approach of using metal oxides (Al2O3 and SiO2) modified with a plasmonic metal (silver, Ag) nanoparticles (NPs)-based nanofluid (NF) formulation for environmental remediation purposes. Firstly, we prepared the Al2O3 and SiO2 NFs of different concentrations (0.2 to 2.0 weight %) by ultrasonic-assisted dispersion of Al2O3 and SiO2 NPs with water as the base fluid. The thermo-physical (viscosity, activation energy, and thermal conductivity), electrical (AC conductivity and dielectric constant) and physical (ultrasonic velocity, density, refractive index) and stability characteristics were comparatively evaluated. The Al2O3 and SiO2 NPs were then catalytically activated by loading silver NPs to obtain Al2O3/SiO2@Ag composite NPs. The catalytic reduction of 4-nitrophenol (4-NP) with Al2O3/SiO2@Ag based NFs was followed. The catalytic efficiency of Al2O3@Ag NF and SiO2@Ag NF, for the 4-NP catalysis, is compared. Based on the catalytic rate constant evaluation, the catalytic reduction efficiency for 4-NP is found to be superior for 2% weight Al2O3@Ag NF (92.9 × 10−3 s−1) as compared to the SiO2@Ag NF (29.3 × 10−3 s−1). Importantly, the enhanced catalytic efficiency of 2% weight Al2O3@Ag NF for 4-NP removal is much higher than other metal NPs based catalysts reported in the literature, signifying the importance of NF formulation-based catalysis.

RSC Advances ◽  
2015 ◽  
Vol 5 (116) ◽  
pp. 96028-96033 ◽  
Author(s):  
Qi Liu ◽  
Yan-Ru Xu ◽  
Ai-Jun Wang ◽  
Jiu-Ju Feng

Core–shell AuPt@Au NCs/rGO was facilely prepared by a one-step melamine-assisted method, which exhibited enhanced catalytic performance for p-nitrophenol reduction.


2015 ◽  
Vol 3 (1) ◽  
pp. 290-296 ◽  
Author(s):  
Jing-Jing Lv ◽  
Ai-Jun Wang ◽  
Xiaohong Ma ◽  
Ru-Yi Xiang ◽  
Jian-Rong Chen ◽  
...  

A facile, green and effective one-pot wet-chemical co-reduction method was developed for preparation of Pt–Au pNDs/RGOs in the presence of cytosine. The nanocomposites exhibited significantly enhanced catalytic performance for 4-nitrophenol reduction.


Catalysts ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 43
Author(s):  
Chao Song ◽  
Shuang Guo ◽  
Lei Chen

In this paper, we designed Ag nanoparticles coated with a Cu2O shell, which was successfully decorated on reduced graphene oxide (rGO) via a solid-state self-reduction. The Cu2O, Ag@Cu2O, and Ag@Cu2O-rGO nanocomposites were synthesized and characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV–Vis, and XPS to evaluate the properties of the composites. In order to compare the chemical catalytic activity, the Cu2O, Ag@Cu2O, and Ag@Cu2O-rGO nanocomposites were employed for the catalytic reduction of p-nitrophenol (4-NP) into p-aminophenol (4-AP) in aqueous solution. The Ag@Cu2O-rGO nanocomposite exhibited excellent catalytic activity due to the intense interaction and high degree of electron transfer among Ag, Cu2O, and rGO. The rGO acted as the platform to bridge the isolated nanoparticles; furthermore, the electrons could quickly transfer from the Ag core to the Cu2O shell, which improved the chemical catalytic efficiency.


2018 ◽  
Vol 74 (11) ◽  
pp. 1310-1324 ◽  
Author(s):  
Xuerui Tian ◽  
Xing Xin ◽  
Yuanzhe Gao ◽  
Dandan Dai ◽  
Jinjin Huang ◽  
...  

The exploration of highly efficient and low-cost catalysts for the treatment of hexavalent chromium CrVI in environmental remediation is currently one of the most challenging topics. Here, three phosphomolybdate hybrid compounds have been successfully isolated by the hydrothermal method and been applied as supramolecular catalysts for the reduction of CrVI. Single-crystal X-ray diffraction revealed their formulae as (H2bpp)2[Fe(H2O)][Sr(H2O)4]2{Fe[Mo6O12(OH)3(H2PO4)(HPO4)(PO4)2]2}·5H2O (1), (H2bpp)2[Na(H2O)(OC2H5)][Fe(H2O)2][Ca(H2O)2]2{Fe[Mo6O12(OH)3(H2PO4)(HPO4)(PO4)2]2}·4H2O (2) and (H2bpe)3{Fe[Mo6O12(OH)3(HPO4)3(H2PO4)]2}·8H2O (3) [bpp is 1,3-bis(pyridin-4-yl)propane (C13H14N2) and bpe is trans-1,2-bis(pyridin-4-yl)ethylene (C12H10N2)]. The three hybrids consist of supramolecular networks built up by noncovalent interactions between {Fe[P4Mo6 VO31]2}22− polyanions and protonated organic cations. This kind of hybrid polyoxometalate could be applied as heterogeneous molecular catalysts for the reduction of CrVI. It was found that the organic moiety plays a vital role in influencing the catalytic activity of the polyanions. Organic bpp-containing hybrids 1 and 2 are highly active in the catalytic reduction of heavy metal CrVI ions using HCOOH as reductant, while bpe-containing hybrid 3 is inactive to this reaction. This work is significant for the design of new catalysts, as well as the exploration of reaction mechanisms at a molecular level.


Nanomaterials ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1663
Author(s):  
Noah U. Naef ◽  
Stefan Seeger

Chemical vapor phase deposition was used to create hydrophobic nanostructured surfaces on glass slides. Subsequently, hydrophilic channels were created by sputtering a metal catalyst on the channels while masking the outside. The surface tension gradient between the hydrophilic surface in the channels and the outside hydrophobicity formed the open-channel system. The reduction of para-nitrophenol (PNP) was studied on these devices. When compared to nanostructure-free reference systems, the created nanostructures, namely, silicone nanofilaments (SNFs) and nano-bagels, had superior catalytic performance (73% and 66% conversion to 55% at 0.5 µL/s flow rate using 20 nm platinum) and wall integrity; therefore, they could be readily used multiple times. The created nanostructures were stable under the reaction conditions, as observed with scanning electron microscopy. Transition electron microscopy studies of platinum-modified SNFs revealed that the catalyst is present as nanoparticles ranging up to 13 nm in size. By changing the target in the sputter coating unit, molybdenum, gold, nickel and copper were evaluated for their catalytic efficiency. The relative order was platinum < gold = molybdenum < nickel < copper. The decomposition of sodium borohydride (NaBH4) by platinum as a concurrent reaction to the para-nitrophenol reduction terminates the reaction before completion, despite a large excess of reducing agent. Gold had the same catalytic rate as molybdenum, while nickel was two times and copper about four times faster than gold. In all cases, there was a clear improvement in catalysis of silicone nanofilaments compared to a flat reference system.


RSC Advances ◽  
2021 ◽  
Vol 11 (22) ◽  
pp. 13386-13395
Author(s):  
Chaozhong Sun ◽  
Xiaoying Guo ◽  
Changzheng Hu ◽  
Laijun Liu ◽  
Liang Fang ◽  
...  

Searching for a new approach in environmental remediation in terms of dye degradation is important in industrialized society.


Catalysts ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 55
Author(s):  
Katarzyna Świrk ◽  
Ye Wang ◽  
Changwei Hu ◽  
Li Li ◽  
Patrick Da Costa ◽  
...  

Copper and iron promoted ZrO2 catalysts were prepared by one-pot synthesis using urea. The studied catalysts were characterized by XRD, N2 physisorption, XPS, temperature-programmed desorption of NH3 (NH3-TPD), and tested by the selective catalytic reduction by ammonia (NH3-SCR) of NO in the absence and presence of water vapor, under the experimental conditions representative of exhaust gases from stationary sources. The influence of SO2 on catalytic performance was also investigated. Among the studied catalysts, the Fe-Zr sample showed the most promising results in NH3-SCR, being active and highly selective to N2. The addition of SO2 markedly improved NO and NH3 conversions during NH3-SCR in the presence of H2O. The improvement in acidic surface properties is believed to be the cause.


Sign in / Sign up

Export Citation Format

Share Document