scholarly journals In Situ Proteolysis Condition-Induced Crystallization of the XcpVWX Complex in Different Lattices

2020 ◽  
Vol 21 (1) ◽  
pp. 308
Author(s):  
Yichen Zhang ◽  
Shu Wang ◽  
Zongchao Jia
Keyword(s):  
Protein Complexes ◽  
Complex Molecule ◽  
Protein Structures ◽  
Hexagonal Lattice ◽  
Atomic Displacement ◽  
Asymmetric Unit ◽  
Orthorhombic Lattice ◽  
Wide Range ◽  
Crystallization Solution

Although prevalent in the determination of protein structures; crystallography always has the bottleneck of obtaining high-quality protein crystals for characterizing a wide range of proteins; especially large protein complexes. Stable fragments or domains of proteins are more readily to crystallize; which prompts the use of in situ proteolysis to remove flexible or unstable structures for improving crystallization and crystal quality. In this work; we investigated the effects of in situ proteolysis by chymotrypsin on the crystallization of the XcpVWX complex from the Type II secretion system of Pseudomonas aeruginosa. Different proteolysis conditions were found to result in two distinct lattices in the same crystallization solution. With a shorter chymotrypsin digestion at a lower concentration; the crystals exhibited a P3 hexagonal lattice that accommodates three complex molecules in one asymmetric unit. By contrast; a longer digestion with chymotrypsin of a 10-fold higher concentration facilitated the formation of a compact P212121 orthorhombic lattice with only one complex molecule in each asymmetric unit. The molecules in the hexagonal lattice have shown high atomic displacement parameter values compared with the ones in the orthorhombic lattice. Taken together; our results clearly demonstrate that different proteolysis conditions can result in the generation of distinct lattices in the same crystallization solution; which can be exploited in order to obtain different crystal forms of a better quality

Uptake of Polynucleotides by Mammalian Cells XV. Properties and Function of a DNA-Protein Complex Situated in the Outer Membrane of Ehrlich Ascites Tumor Cells

1978 ◽  
Vol 33 (1-2) ◽  
pp. 96-104 ◽  
Author(s):  
P. L. Schell
Keyword(s):  
Protein Complex ◽  
Mammalian Cells ◽  
Protein Complexes ◽  
Protein Structures ◽  
Uptake Capacity ◽  
Viable Cells ◽  
Ehrlich Ascites ◽  
Protease Treatment ◽  
And Function

Abstract 1) DNA-protein complexes are supposed to be original constituents of the membrane of Ehrlich ascites tum or cells. These complexes can be attacked at the surface of viable cells by DNase or protease. The DNA is partially embedded in protein structures.2) The net charge of this complex is of major importance for the RNA uptake capacity of the cells. Negatively charged DNA which is situated at the surface hinders RNA uptake. This is the explanation for the stimulation of RNA uptake by DNase or the decrease in RNA uptake after protease treatment.3) Upon treatment of DNA-dcficient complexes with homologous or heterologous DNA the original RNA uptake capacity of the cells is restored but the original conformation of the complex cannot be regained.4) The DNase action on the complex is tem perature dependent in a sigmoidal fashion. It is m arkedly slowed down at tem peratures below 12 °C. This implies that structural dianges in the complex occur at this transition tem perature which make surface DNA susceptible to DNase. This effect can only be observed in original structures but not in reconstituted ones.5) Polyanion treatment of the cells [poly (L-lysine) ] which increases their RNA uptake capacity, most probably does not interact with the DNA-protein complex. Poly (L-lysine) appears to act at other m em brane sites.6) The DNA-protein complex has been investigated entirely in situ , i. e. situated in the membrane of viable cells.

In-situ electrical-resistivity measurements in the high-voltage electron microscope

1978 ◽  
Vol 36 (1) ◽  
pp. 68-69
Author(s):  
W. E. King
Keyword(s):  
Electrical Resistivity ◽  
Electron Microscope ◽  
High Voltage ◽  
Resistivity Measurements ◽  
Voltage Electron ◽  
High Voltage Electron Microscope ◽  
High Voltage Electron ◽  
Wide Range ◽  
Helium Gas

A side-entry type, helium-temperature specimen stage that has the capability of in-situ electrical-resistivity measurements has been designed and developed for use in the AEI-EM7 1200-kV electron microscope at Argonne National Laboratory. The electrical-resistivity measurements complement the high-voltage electron microscope (HVEM) to yield a unique opportunity to investigate defect production in metals by electron irradiation over a wide range of defect concentrations.A flow cryostat that uses helium gas as a coolant is employed to attain and maintain any specified temperature between 10 and 300 K. The helium gas coolant eliminates the vibrations that arise from boiling liquid helium and the temperature instabilities due to alternating heat-transfer mechanisms in the two-phase temperature regime (4.215 K). Figure 1 shows a schematic view of the liquid/gaseous helium transfer system. A liquid-gas mixture can be used for fast cooldown. The cold tip of the transfer tube is inserted coincident with the tilt axis of the specimen stage, and the end of the coolant flow tube is positioned without contact within the heat exchanger of the copper specimen block (Fig. 2).

Reconstruction of Chitin-Protein Complexes Using Correlation Averaging Methods: Ovipositor of the Ichneumon Fly Megarhyssa

1980 ◽  
Vol 38 ◽  
pp. 38-39
Author(s):  
L. T. Germinario ◽  
J. Blackwell ◽  
J. Frank
Keyword(s):  
Protein Complexes ◽  
Hexagonal Lattice ◽  
Uranyl Acetate ◽  
Optical Diffraction ◽  
Insect Cuticle ◽  
High Dose ◽  
Wide Angle ◽  
X Ray ◽  
Averaging Methods ◽  
Digital Correlation

This report describes the use of digital correlation and averaging methods 1,2 for the reconstruction of high dose electron micrographs of the chitin-protein complex from Megarhyssa ovipositor. Electron microscopy of uranyl acetate stained insect cuticle has demonstrated a hexagonal array of unstained chitin monofibrils, 2.4−3.0 nm in diameter, in a stained protein matrix3,4. Optical diffraction Indicated a hexagonal lattice with a = 5.1-8.3 nm3 A particularly well ordered complex is found in the ovipositor of the ichneumon fly Megarhyssa: the small angle x-ray data gives a = 7.25 nm, and the wide angle pattern shows that the protein consists of subunits arranged in a 61 helix, with an axial repeat of 3.06 nm5.

Chaperonin as the normal controls and pathological anti-stress response in the human reproductive system

2016 ◽  
pp. 126-129
Author(s):  
M. Makarenko ◽  
◽  
D. Hovsyeyev ◽  
L. Sydoryk ◽  
◽  
...  
Keyword(s):  
Reproductive System ◽  
Stress Proteins ◽  
Physiological Stress ◽  
Protein Complexes ◽  
Reproductive Function ◽  
Intercellular Signaling ◽  
Toll Like Receptors ◽  
Wide Range ◽  
Protein Functions ◽  
And Function

Different kinds of physiological stress cause mass changes in the cells, including the changes in the structure and function of the protein complexes and in separate molecules. The protein functions is determined by its folding (the spatial conclusion), which depends on the functioning of proteins of thermal shock- molecular chaperons (HSPs) or depends on the stress proteins, that are high-conservative; specialized proteins that are responsible for the correct proteinaceous folding. The family of the molecular chaperones/ chaperonins/ Hsp60 has a special place due to the its unique properties of activating the signaling cascades through the system of Toll-like receptors; it also stimulates the cells to produce anti- inflammatory cytokines, defensins, molecules of cell adhesion and the molecules of MHC; it functions as the intercellular signaling molecule. The pathological role of Hsp60 is established in a wide range of illnesses, from diabetes to atherosclerosis, where Hsp60 takes part in the regulation of both apoptosis and the autoimmune processes. The presence of the HSPs was found in different tissues that are related to the reproductive system. Key words: molecular chaperons (HSPs), Toll-like receptors, reproductive function, natural auto antibody.

Site specific agricultural soil management with the use of new technologies

2013 ◽  
Vol 16 (1) ◽  
pp. 59-67
Keyword(s):  
New Technologies ◽  
Digital Interface ◽  
Appropriate Treatment ◽  
Wide Range ◽  
Soil Variation ◽  
Soil Information ◽  
Remote Sensing Techniques ◽  
Agricultural Areas

<p>The Soil Science Institute of Thessaloniki produces new digitized Soil Maps that provide a useful electronic database for the spatial representation of the soil variation within a region, based on in situ soil sampling, laboratory analyses, GIS techniques and plant nutrition mathematical models, coupled with the local land cadastre. The novelty of these studies is that local agronomists have immediate access to a wide range of soil information by clicking on a field parcel shown in this digital interface and, therefore, can suggest an appropriate treatment (e.g. liming, manure incorporation, desalination, application of proper type and quantity of fertilizer) depending on the field conditions and cultivated crops. A specific case study is presented in the current work with regards to the construction of the digitized Soil Map of the regional unit of Kastoria. The potential of this map can easily be realized by the fact that the mapping of the physicochemical properties of the soils in this region provided delineation zones for differential fertilization management. An experiment was also conducted using remote sensing techniques for the enhancement of the fertilization advisory software database, which is a component of the digitized map, and the optimization of nitrogen management in agricultural areas.</p>

Indium Bromide-catalyzed Unprecedented Hydrogenolysis: A Novel One-Pot Synthesis of Per-O-Acetylated β-carboxymethyl O and S-glycosides

2020 ◽  
Vol 24 (8) ◽  
pp. 900-908
Author(s):  
Ram Naresh Yadav ◽  
Amrendra K Singh ◽  
Bimal Banik
Keyword(s):  
Asymmetric Synthesis ◽  
Chiral Auxiliary ◽  
Bioactive Molecules ◽  
One Pot ◽  
Enantiomerically Pure ◽  
Stereoselective Glycosylation ◽  
One Pot Synthesis ◽  
Wide Range

Numerous O (oxa)- and S (thia)-glycosyl esters and their analogous glycosyl acids have been accomplished through stereoselective glycosylation of various peracetylated bromo sugar with benzyl glycolate using InBr3 as a glycosyl promotor followed by in situ hydrogenolysis of resulting glycosyl ester. A tandem glycosylating and hydrogenolytic activity of InBr3 has been successfully investigated in a one-pot procedure. The resulting synthetically valuable and virtually unexplored class of β-CMGL (glycosyl acids) could serve as an excellent potential chiral auxiliary in the asymmetric synthesis of a wide range of enantiomerically pure medicinally prevalent β-lactams and other bioactive molecules of diverse medicinal interest.

scholarly journals A Generalization Performance Study Using Deep Learning Networks in Embedded Systems

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1031
Author(s):  
Joseba Gorospe ◽  
Rubén Mulero ◽  
Olatz Arbelaitz ◽  
Javier Muguerza ◽  
Miguel Ángel Antón
Keyword(s):  
Deep Learning ◽  
Embedded Systems ◽  
Embedded System ◽  
General Purpose ◽  
Learning Networks ◽  
Performance Study ◽  
Learning Techniques ◽  
Wide Range ◽  
Learning Architectures

Deep learning techniques are being increasingly used in the scientific community as a consequence of the high computational capacity of current systems and the increase in the amount of data available as a result of the digitalisation of society in general and the industrial world in particular. In addition, the immersion of the field of edge computing, which focuses on integrating artificial intelligence as close as possible to the client, makes it possible to implement systems that act in real time without the need to transfer all of the data to centralised servers. The combination of these two concepts can lead to systems with the capacity to make correct decisions and act based on them immediately and in situ. Despite this, the low capacity of embedded systems greatly hinders this integration, so the possibility of being able to integrate them into a wide range of micro-controllers can be a great advantage. This paper contributes with the generation of an environment based on Mbed OS and TensorFlow Lite to be embedded in any general purpose embedded system, allowing the introduction of deep learning architectures. The experiments herein prove that the proposed system is competitive if compared to other commercial systems.

scholarly journals Global soil moisture data derived through machine learning trained with in-situ measurements

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Sungmin O. ◽  
Rene Orth
Keyword(s):  
Machine Learning ◽  
Soil Moisture ◽  
Large Scale ◽  
Short Term Memory ◽  
Temporal Dynamics ◽  
Soil Moisture Data ◽  
Wide Range ◽  
Global Soil

AbstractWhile soil moisture information is essential for a wide range of hydrologic and climate applications, spatially-continuous soil moisture data is only available from satellite observations or model simulations. Here we present a global, long-term dataset of soil moisture derived through machine learning trained with in-situ measurements, SoMo.ml. We train a Long Short-Term Memory (LSTM) model to extrapolate daily soil moisture dynamics in space and in time, based on in-situ data collected from more than 1,000 stations across the globe. SoMo.ml provides multi-layer soil moisture data (0–10 cm, 10–30 cm, and 30–50 cm) at 0.25° spatial and daily temporal resolution over the period 2000–2019. The performance of the resulting dataset is evaluated through cross validation and inter-comparison with existing soil moisture datasets. SoMo.ml performs especially well in terms of temporal dynamics, making it particularly useful for applications requiring time-varying soil moisture, such as anomaly detection and memory analyses. SoMo.ml complements the existing suite of modelled and satellite-based datasets given its distinct derivation, to support large-scale hydrological, meteorological, and ecological analyses.

scholarly journals Quantification of assembly forces during creation of head-neck taper junction considering soft tissue bearing: a biomechanical study

Arthroplasty ◽  
2021 ◽  
Vol 3 (1) ◽  
Author(s):  
Toni Wendler ◽  
Torsten Prietzel ◽  
Robert Möbius ◽  
Jean-Pierre Fischer ◽  
Andreas Roth ◽  
...  
Keyword(s):  
Soft Tissue ◽  
Work Experience ◽  
Soft Tissues ◽  
Force Sensor ◽  
Biomechanical Study ◽  
Measuring System ◽  
Wide Range ◽  
Head Neck

Abstract Background All current total hip arthroplasty (THA) systems are modular in design. Only during the operation femoral head and stem get connected by a Morse taper junction. The junction is realized by hammer blows from the surgeon. Decisive for the junction strength is the maximum force acting once in the direction of the neck axis, which is mainly influenced by the applied impulse and surrounding soft tissues. This leads to large differences in assembly forces between the surgeries. This study aimed to quantify the assembly forces of different surgeons under influence of surrounding soft tissue. Methods First, a measuring system, consisting of a prosthesis and a hammer, was developed. Both components are equipped with a piezoelectric force sensor. Initially, in situ experiments on human cadavers were carried out using this system in order to determine the actual assembly forces and to characterize the influence of human soft tissues. Afterwards, an in vitro model in the form of an artificial femur (Sawbones Europe AB, Malmo, Sweden) with implanted measuring stem embedded in gelatine was developed. The gelatine mixture was chosen in such a way that assembly forces applied to the model corresponded to those in situ. A study involving 31 surgeons was carried out on the aforementioned in vitro model, in which the assembly forces were determined. Results A model was developed, with the influence of human soft tissues being taken into account. The assembly forces measured on the in vitro model were, on average, 2037.2 N ± 724.9 N, ranging from 822.5 N to 3835.2 N. The comparison among the surgeons showed no significant differences in sex (P = 0.09), work experience (P = 0.71) and number of THAs performed per year (P = 0.69). Conclusions All measured assembly forces were below 4 kN, which is recommended in the literature. This could lead to increased corrosion following fretting in the head-neck interface. In addition, there was a very wide range of assembly forces among the surgeons, although other influencing factors such as different implant sizes or materials were not taken into account. To ensure optimal assembly force, the impaction should be standardized, e.g., by using an appropriate surgical instrument.

Regioselective Functionalization of N-Fused Heteroaromatics via FeCl3-Catalyzed Nucleophilic Addition to Activated N-Heterocycles

Synthesis ◽  
2020 ◽  
Author(s):  
Ikyon Kim ◽  
Sung June Kim ◽  
Sunhee Lee
Keyword(s):  
Aromatic Compounds ◽  
Nucleophilic Addition ◽  
Chemical Space ◽  
Wide Range ◽  
Regioselective Functionalization

AbstractBroadening of nitrogen-fused heteroaromatic chemical space such as indolizine and pyrrolo[1,2-a]pyrazine was achieved via FeCl­3-catalyzed nucleophilic addition of these N-fused aromatic compounds to a wide range of azolinium systems generated in situ, leading to novel N-fused heteroaromatic scaffolds with dearomatized N-heterocyclic substituents regioselectively. Nucleophilic addition of indolizines and pyrrolo[1,2-a]pyrazines mainly occurred at the C1 position of the isoquinoliniums and at the C4 site of the quinoliniums.

Sign in / Sign up

Export Citation Format

Share Document