scholarly journals Structural Reorganization of Imidazolium Ionic Liquids Induced by Pressure-Enhanced Ionic Liquid—Polyethylene Oxide Interactions

2021 ◽  
Vol 22 (2) ◽  
pp. 981
Author(s):  
Teng-Hui Wang ◽  
Li-Wen Hsu ◽  
Hai-Chou Chang
Keyword(s):  
High Pressure ◽  
Ionic Liquids ◽  
Polyethylene Oxide ◽  
High Pressures ◽  
Ambient Pressure ◽  
Structural Reorganization ◽  
Imidazolium Ionic Liquids ◽  
Local Structures ◽  
Electronic Switches ◽  
Pressure Phase

Mixtures of polyethylene oxide (PEO, M.W.~900,000) and imidazolium ionic liquids (ILs) are studied using high-pressure Fourier-transform infrared spectroscopy. At ambient pressure, the spectral features in the C–H stretching region reveal that PEO can disturb the local structures of the imidazolium rings of [BMIM]+ and [HMIM]+. The pressure-induced phase transition of pure 1-butyl-3-methylimidazolium bromide ([BMIM]Br) is observed at a pressure of 0.4 GPa. Pressure-enhanced [BMIM]Br-PEO interactions may assist PEO in dividing [BMIM]Br clusters to hinder the aggregation of [BMIM]Br under high pressures. The C–H absorptions of pure 1-hexyl-3-methylimidazolium bromide [HMIM]Br do not show band narrowing under high pressures, as observed for pure [BMIM]Br. The band narrowing of C–H peaks is observed at 1.5 GPa for the [HMIM]Br-PEO mixture containing 80 wt% of [HMIM]Br. The presence of PEO may reorganize [HMIM]Br clusters into a semi-crystalline network under high pressures. The differences in aggregation states for ambient-pressure phase and high-pressure phase may suggest the potential of [HMIM]Br-PEO (M.W.~900,000) for serving as optical or electronic switches.

scholarly journals Characterization of Local Structures of Confined Imidazolium Ionic Liquids in PVdF-co-HFP Matrices by High Pressure Infrared Spectroscopy

Nanomaterials ◽  
2020 ◽  
Vol 10 (10) ◽  
pp. 1973 ◽  
Author(s):  
Teng-Hui Wang ◽  
Ming-Siou Wu ◽  
Hai-Chou Chang
Keyword(s):  
High Pressure ◽  
Ionic Liquids ◽  
Infrared Spectroscopy ◽  
High Pressures ◽  
Vinylidene Fluoride ◽  
Ambient Pressure ◽  
Liquid Polymer ◽  
Local Structures ◽  
Poly Vinylidene Fluoride

The nanoscale ion ordering of ionic liquids at confined interfaces under high pressures was investigated in this study. 1-Hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([HMIM][NTf2])/poly(vinylidene fluoride-co-hexafluoropropylene) (PVdF-co-HFP) and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIM][NTf2])/PVdF-co-HFP were prepared and characterized by using high-pressure infrared spectroscopy. Under ambient pressure, imidazolium C2–H and C4,5–H absorptions were blue-shifted in frequency due to the presence of PVdF-co-HFP. However, the absorption of anionic νa SO2 did not reveal any significant shifts in frequency upon dilution by PVdF-co-HFP. The experimental results suggest that PVdF-co-HFP disturbs the local structures of the imidazolium C–H groups instead of the anionic SO2 groups. The frequency shifts of C4,5–H became dramatic for the mixtures at high pressures. These results suggest that pressure-enhanced ionic liquid–polymer interactions may play an appreciable role in IL-PVdF-co-HFP systems under high pressures. The pressure-induced blue-shifts due to the PVdF-co-HFP additions were more obvious for the [HMIM][NTf2] mixtures than for [EMIM][NTf2] mixtures.

scholarly journals Pressure-Dependent Clustering in Ionic-Liquid-Poly (Vinylidene Fluoride) Mixtures: An Infrared Spectroscopic Study

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 2099
Author(s):  
Teng-Hui Wang ◽  
Wei-Xiang Wang ◽  
Hai-Chou Chang
Keyword(s):  
High Pressure ◽  
High Pressures ◽  
Vinylidene Fluoride ◽  
Ambient Pressure ◽  
Infrared Spectroscopic Study ◽  
Research Attention ◽  
Nanoscale Structures ◽  
Local Structures ◽  
Poly Vinylidene Fluoride ◽  
Hydrogen Bonded

The nanostructures of ionic liquids (ILs) have been the focus of considerable research attention in recent years. Nevertheless, the nanoscale structures of ILs in the presence of polymers have not been described in detail at present. In this study, nanostructures of ILs disturbed by poly(vinylidene fluoride) (PVdF) were investigated via high-pressure infrared spectra. For 1-(2-hydroxyethyl)-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([HEMIm][TFSI])-PVdF mixtures, non-monotonic frequency shifts of the C4,5-H vibrations upon dilution were observed under ambient pressure. The experimental results suggest the presence of microheterogeneity in the [HEMIm][TFSI] systems. Upon compression, PVdF further influenced the local structure of C4,5–H via pressure-enhanced IL–PVdF interactions; however, the local structures of C2–H and hydrogen-bonded O–H were not affected by PVdF under high pressures. For choline [TFSI]–PVdF mixtures, PVdF may disturb the local structures of hydrogen-bonded O–H. In the absence of the C4,5–H⋯anion and C2–H⋯anion in choline [TFSI]–PVdF mixtures, the O–H group becomes a favorable moiety for pressure-enhanced IL–PVdF interactions. Our results indicate the potential of high-pressure application for designing pressure-dependent electronic switches based on the possible changes in the microheterogeneity and electrical conductivity in IL-PVdF systems under various pressures.

LEAD-CHALCOGENIDES UNDER PRESSURE: AB-INITIO STUDY

2013 ◽  
Vol 22 ◽  
pp. 612-618 ◽  
Author(s):  
DINESH C. GUPTA ◽  
IDRIS HAMID
Keyword(s):  
Phase Transition ◽  
High Pressure ◽  
Ab Initio ◽  
Band Gap ◽  
Rock Salt ◽  
High Pressures ◽  
Ambient Pressure ◽  
High Pressure Phase ◽  
Lead Chalcogenides ◽  
Pressure Phase

ab-initio calculations using fully relativistic pseudo-potential have been performed to investigate the high pressure phase transition, elastic and electronic properties of lead-chalcogenides including the less known lead polonium. The calculated ground state parameters, for the rock-salt structure show good agreement with the experimental data. The enthalpy calculations show that these materials undergo a first-order phase transition from rock-salt to CsCl structure at 19.4, 15.5, 11.5 and 7.3 GPa for PbS, PbSe, PbTe and PbPo, respectively. Present calculations successfully predicted the location of the band gap at L-point of Brillouin zone as well as the value of the band gap in every case at ambient pressure. It is observed that unlike other lead-chalcogenides, PbPo is semi-metal at ambient pressure. The pressure variation of the energy gap indicates that these materials metalized under high pressures. For this purpose, the electronic structure of these materials has also been computed in parent as well as in high pressure phase.

scholarly journals Crystal and electronic structure engineering of tin monoxide by external pressure

2021 ◽  
Author(s):  
Kun Li ◽  
Junjie Wang ◽  
Vladislav A. Blatov ◽  
Yutong Gong ◽  
Naoto Umezawa ◽  
...  
Keyword(s):  
Phase Transition ◽  
High Pressure ◽  
Band Gap ◽  
High Pressures ◽  
Low Pressure ◽  
Widespread Application ◽  
Space Group ◽  
Tin Monoxide ◽  
High Possibility ◽  
Pressure Phase

AbstractAlthough tin monoxide (SnO) is an interesting compound due to its p-type conductivity, a widespread application of SnO has been limited by its narrow band gap of 0.7 eV. In this work, we theoretically investigate the structural and electronic properties of several SnO phases under high pressures through employing van der Waals (vdW) functionals. Our calculations reveal that a metastable SnO (β-SnO), which possesses space group P21/c and a wide band gap of 1.9 eV, is more stable than α-SnO at pressures higher than 80 GPa. Moreover, a stable (space group P2/c) and a metastable (space group Pnma) phases of SnO appear at pressures higher than 120 GPa. Energy and topological analyses show that P2/c-SnO has a high possibility to directly transform to β-SnO at around 120 GPa. Our work also reveals that β-SnO is a necessary intermediate state between high-pressure phase Pnma-SnO and low-pressure phase α-SnO for the phase transition path Pnma-SnO →β-SnO → α-SnO. Two phase transition analyses indicate that there is a high possibility to synthesize β-SnO under high-pressure conditions and have it remain stable under normal pressure. Finally, our study reveals that the conductive property of β-SnO can be engineered in a low-pressure range (0–9 GPa) through a semiconductor-to-metal transition, while maintaining transparency in the visible light range.

Phase transitions in ReO3studied by high-pressure X-ray diffraction

2000 ◽  
Vol 33 (2) ◽  
pp. 279-284 ◽  
Author(s):  
J.-E. Jørgensen ◽  
J. Staun Olsen ◽  
L. Gerward
Keyword(s):  
High Pressure ◽  
Phase Transitions ◽  
Powder Diffraction ◽  
Ambient Pressure ◽  
Rhombohedral Phase ◽  
X Ray Diffraction ◽  
X Ray ◽  
Oxygen Ions ◽  
Pressure Phase ◽  
Related Phase

ReO3has been studied at pressures up to 52 GPa by X-ray powder diffraction. The previously observed cubicIm3¯ high-pressure phase was shown to transform to a monoclinic MnF3-related phase at about 3 GPa. All patterns recorded above 12 GPa could be indexed on rhombohedral cells. The compressibility was observed to decrease abruptly at 38 GPa. It is therefore proposed that the oxygen ions are hexagonally close packed above this pressure, giving rise to two rhombohedral phases labelled I and II. The zero-pressure bulk moduliBoof the observed phases were determined and the rhombohedral phase II was found to have an extremely large value of 617 (10) GPa. It was found that ReO3transforms back to thePm3¯mphase found at ambient pressure.

High-Pressure Synthesis, Crystal Structure, and Properties of the New Orthorhombic Rare-Earth meta-Oxoborates RE(BO2)3 (RE = Dy – Lu)

2004 ◽  
Vol 59 (2) ◽  
pp. 202-215 ◽  
Author(s):  
Holger Emme ◽  
Tanja Nikelski ◽  
Thomas Schleid ◽  
Rainer Pöttgen ◽  
Manfred Heinrich Möller ◽  
...  
Keyword(s):  
High Pressure ◽  
High Temperature ◽  
Ambient Pressure ◽  
Structure And Properties ◽  
Crystal Data ◽  
Temperature Conditions ◽  
Pressure Synthesis ◽  
Ir Spectroscopic ◽  
Pressure Phase

The new orthorhombic meta-oxoborates RE(BO2)3 (≡REB3O6) (RE = Dy-Lu) have been synthesized under high-pressure and high-temperature conditions in a Walker-type multianvil apparatus at 7.5 GPa and 1100 °C. They are isotypic to the known ambient pressure phase Tb(BO2)3, space group Pnma. In contrast to Dy(BO2)3, which was also obtained in small amounts under high-temperature conditions, the preparation of the higher orthorhombic homologues RE(BO2)3 (RE = Ho-Lu) was only possible using high-pressure. The meta-oxoborates RE(BO2)3 (RE = Dy-Er) were synthesized as pure products, whereas the orthorhombic phases with RE = Tm-Lu were only obtained as byproducts. With the exception of Yb(BO2)3 it was possible to establish single crystal data for all compounds. The results of temperature-resolved in-situ powder-diffraction measurements, DTA, IR-spectroscopic investigations, and magnetic properties are also presented.

High-Pressure Phase Transitions of Cubic Y 2 O 3 under High Pressures by In-situ Synchrotron X-Ray Diffraction

2019 ◽  
Vol 36 (4) ◽  
pp. 046103 ◽  
Author(s):  
Sheng Jiang ◽  
Jing Liu ◽  
Xiao-Dong Li ◽  
Yan-Chun Li ◽  
Shang-Ming He ◽  
...  
Keyword(s):  
High Pressure ◽  
Phase Transitions ◽  
High Pressures ◽  
High Pressure Phase ◽  
X Ray Diffraction ◽  
X Ray ◽  
Pressure Phase

High-Pressure Synthesis and Crystal Structure of the New Orthorhombic Polymorph β-HgB4O7

2005 ◽  
Vol 60 (8) ◽  
pp. 815-820 ◽  
Author(s):  
Holger Emme ◽  
Matthias Weil ◽  
Hubert Huppertz
Keyword(s):  
Crystal Structure ◽  
High Pressure ◽  
Ambient Pressure ◽  
Normal Pressure ◽  
High Pressure Phase ◽  
Synthesis And Crystal Structure ◽  
Space Group ◽  
High Pressure Synthesis ◽  
Pressure Synthesis ◽  
Pressure Phase

The new orthorhombic polymorph β-HgB4O7 has been synthesized under high-pressure and hightemperature conditions in a Walker-type multianvil apparatus at 7.5 GPa and 600 °C. β-HgB4O7 is isotypic to the known ambient pressure phases MB4O7 (M = Sr, Pb, Eu) and the high-pressure phase β-CaB4O7 crystallizing with two formula units in the space group Pmn21 with lattice parameters a = 1065.6(2), b = 438.10(9), and c = 418.72(8) pm. The relation of the crystal structure of the high-pressure phase β-HgB4O7 to the normal pressure phase α-HgB4O7 as well as the relation to the isotypic phases MB4O7 (M = Sr, Pb, Eu) and β-CaB4O7 are discussed.

Sign in / Sign up

Export Citation Format

Share Document