scholarly journals Numerical Steady and Transient Evaluation of a Confined Swirl Stabilized Burner

2021 ◽  
Vol 6 (4) ◽  
pp. 46
Author(s):  
Federica Farisco ◽  
Luisa Castellanos ◽  
Jakob Woisetschläger ◽  
Wolfgang Sanz
Keyword(s):  
Heat Release ◽  
Gas Turbines ◽  
Numerical Data ◽  
Operating Conditions ◽  
Main Reaction ◽  
Combustion Model ◽  
Ansys Fluent ◽  
Lean Premixed Combustion ◽  
Flamelet Generated Manifold ◽  
Lift Off

Lean premixed combustion technology became state of the art in recent heavy-duty gas turbines and aeroengines. In combustion chambers operating under fuel-lean conditions, unsteady heat release can augment pressure amplitudes, resulting in component engine damages. In order to achieve deeper knowledge concerning combustion instabilities, it is necessary to analyze in detail combustion processes. The current study supports this by conducting a numerical investigation of combustion in a premixed swirl-stabilized methane burner with operating conditions taken from experimental data that were recently published. It is a follow-up of a previous paper from Farisco et al., 2019 where a different combustion configuration was studied. The commercial code ANSYS Fluent has been used with the aim to perform steady and transient calculations via Large Eddy Simulation (LES) of the current confined methane combustor. A validation of the numerical data has been performed against the available experiments. In this study, the numerical temperature profiles have been compared with the measurements. The heat release parameter has been experimentally and numerically estimated in order to point out the position of the main reaction zone. Several turbulence and combustion models have been investigated with the aim to come into accord with the experiments. The outcome showed that the combustion model Flamelet Generated Manifold (FGM) with the k-ω turbulence model was able to correctly simulate flame lift-off.

Numerical Investigation of a Swirl Stabilized Methane Fired Burner and Validation With Experimental Data

2019 ◽  
Author(s):  
Federica Farisco ◽  
Philipp Notsch ◽  
Rene Prieler ◽  
Felix Greiffenhagen ◽  
Jakob Woisetschlaeger ◽  
...  
Keyword(s):  
Experimental Data ◽  
Flow Field ◽  
Heat Release ◽  
Reaction Zone ◽  
Gas Turbines ◽  
Combustion Process ◽  
Operating Conditions ◽  
Main Reaction ◽  
Combustion Models ◽  
Flamelet Generated Manifold

Abstract In modern gas turbines for power generation and future aircraft engines, the necessity to reduce NOx emissions led to the implementation of a premixed combustion technology under fuel-lean conditions. In the combustion chamber of these systems, extreme pressure amplitudes can occur due to the unsteady heat release, reducing component life time or causing unexpected shutdown events. In order to understand and predict these instabilities, an accurate knowledge of the combustion process is inevitable. This study, which was provided by numerical methods, such as Computational Fluid Dynamics (CFD) is based on a three-dimensional (3D) geometry representing a premixed swirl-stabilized methane-fired burner configuration with a known flow field in the vicinity of the burner and well defined operating conditions. Numerical simulations of the swirl-stabilized methane-fired burner have been carried out using the commercial code ANSYS Fluent. The main objective is to validate the performance of various combustion models with different complexity by comparing against experimental data. Experiments have been performed for the swirl-stabilized methane-fired burner applying different technologies. Velocity fluctuation measurements have been carried out and validated through several techniques, such as Laser Doppler Anemometry (LDA) and Particle Image Velocimetry (PIV). Laser Interferometric Vibrometry (LIV) provided information on heat release fluctuations and OH*-chemiluminescence measurements have been done to identify the position of the main reaction zone. During the first part of the CFD investigation, the cold flow has been simulated applying different turbulence models and the velocity flow field obtained in the experiments has been compared with the numerical results. As next, the study focuses on the numerical analysis of the thermo-chemical processes in the main reaction zone. Few combustion models have been investigated beginning from Eddy Dissipation Model (EDM) and proceeding with increased complexity investigating the Steady Flamelet Model (SLF) and Flamelet Generated Manifold (FGM). An evaluation of the velocity field and temperature profile has been performed for all models used in order to test the validity of the numerical approach for the chosen geometry. The best option for future investigations of gas turbines has been identified.

CFD Analysis of a Complete Industrial Lean Premixed Gas Turbine Combustor

2000 ◽  
Author(s):  
P. Birkby ◽  
R. S. Cant ◽  
W. N. Dawes ◽  
A. A. J. Demargne ◽  
P. C. Dhanasekaran ◽  
...  
Keyword(s):  
Gas Turbines ◽  
Combustion Process ◽  
Operating Conditions ◽  
Combustion Model ◽  
Reacting Flow ◽  
Lean Premixed Combustion ◽  
Fuel Injectors ◽  
Lean Premixed ◽  
Industrial Gas Turbines ◽  
Combustion Technology

The introduction of lean premixed combustion technology in industrial gas turbines has led to a number of interesting technical issues. Lean premixed combustors are especially prone to acoustically-coupled combustion oscillations as well as to other problems of flame stability such as flashback. Clearly it is very important to understand the physics that lies behind such behaviour in order to produce robust and comprehensive remedies, and also to underpin the future development of new combustor designs. Simulation of the flow and combustion using Computational Fluid Dynamics (CFD) offers an attractive way forward, provided that the modelling of turbulence and combustion is adequate and that the technique is applicable to real industrial combustor geometries. The paper presents a series of CFD simulations of the Rolls-Royce Trent industrial combustor carried out using the McNEWT unstructured code. The entire combustion chamber geometry is represented including the premixing ducts, the fuel injectors and the discharge nozzle. A modified k-ε model has been used together with an advanced laminar flamelet combustion model that is sensitive to variations in fuel-air mixture stoichiometry. Detailed results have been obtained for the non-reacting flow field, for the mixing of fuel and air and for the combustion process itself at a number of different operating conditions. The study has provided a great deal of useful information on the operation of the combustor and has demonstrated the value of CFD-based combustion analysis in an industrial context.

scholarly journals The Influence of Carrier Air Preheating on Autoignition of Inline-Injected Hydrogen–Nitrogen Mixtures in Vitiated Air of High Temperature

2017 ◽  
Vol 140 (3) ◽  
Author(s):  
Christoph A. Schmalhofer ◽  
Peter Griebel ◽  
Manfred Aigner
Keyword(s):  
Hydrogen Content ◽  
Gas Turbines ◽  
High Speed ◽  
Flame Stabilization ◽  
Operating Conditions ◽  
Promoting Effect ◽  
Experimental Conditions ◽  
Lean Premixed Combustion ◽  
Image Velocimetry ◽  
Fuel Mixtures

The use of highly reactive hydrogen-rich fuels in lean premixed combustion systems strongly affects the operability of stationary gas turbines (GT) resulting in higher autoignition and flashback risks. The present study investigates the autoignition behavior and ignition kernel evolution of hydrogen–nitrogen fuel mixtures in an inline co-flow injector configuration at relevant reheat combustor operating conditions. High-speed luminosity and particle image velocimetry (PIV) measurements in an optically accessible reheat combustor are employed. Autoignition and flame stabilization limits strongly depend on temperatures of vitiated air and carrier preheating. Higher hydrogen content significantly promotes the formation and development of different types of autoignition kernels: More autoignition kernels evolve with higher hydrogen content showing the promoting effect of equivalence ratio on local ignition events. Autoignition kernels develop downstream a certain distance from the injector, indicating the influence of ignition delay on kernel development. The development of autoignition kernels is linked to the shear layer development derived from global experimental conditions.

scholarly journals Measurement of Air-Fuel Ratio Fluctuations Caused by Combustor Driven Oscillations

1998 ◽  
Author(s):  
Rajiv Mongia ◽  
Robert Dibble ◽  
Jeff Lovett
Keyword(s):  
Power Spectrum ◽  
Mole Fraction ◽  
Gas Turbines ◽  
Operating Conditions ◽  
Premixed Combustion ◽  
Pollutant Emissions ◽  
Combustion Instabilities ◽  
Pressure Oscillations ◽  
Lean Premixed Combustion ◽  
Lean Premixed

Lean premixed combustion has emerged as a method of achieving low pollutant emissions from gas turbines. A common problem of lean premixed combustion is combustion instability. As conditions inside lean premixed combustors approach the lean flammability limit, large pressure variations are encountered. As a consequence, certain desirable gas turbine operating regimes are not approachable. In minimizing these regimes, combustor designers must rely upon trial and error because combustion instabilities are not well understood (and thus difficult to model). When they occur, pressure oscillations in the combustor can induce fluctuations in fuel mole fraction that can augment the pressure oscillations (undesirable) or dampen the pressure oscillations (desirable). In this paper, we demonstrate a method for measuring the fuel mole fraction oscillations which occur in the premixing section during combustion instabilities produced in the combustor that is downstream of the premixer. The fuel mole fraction in the premixer is measured with kHz resolution by the absorption of light from a 3.39 μm He-Ne laser. A sudden expansion combustor is constructed to demonstrate this fuel mole fraction measurement technique. Under several operating conditions, we measure significant fuel mole fraction fluctuations that are caused by pressure oscillations in the combustion chamber. Since the fuel mole fraction is sampled continuously, a power spectrum is easily generated. The fuel mole fraction power spectrum clearly indicates fuel mole fraction fluctuation frequencies are the same as the pressure fluctuation frequencies under some operating conditions.

scholarly journals Variable Geometry Fuel Injector for Low Emissions Gas Turbines

1999 ◽  
Author(s):  
K. Smith ◽  
R. Steele ◽  
J. Rogers
Keyword(s):  
Gas Turbines ◽  
Field Tests ◽  
Flow Distribution ◽  
Operating Conditions ◽  
Variable Geometry ◽  
Fuel Injector ◽  
System Variable ◽  
Lean Premixed Combustion ◽  
Stable Operating ◽  
Lean Premixed

To extend the stable operating range of a lean premixed combustion system, variable geometry can be used to adjust the combustor air flow distribution as gas turbine operating conditions vary. This paper describes the design and preliminary testing of a lean premixed fuel injector that provides the variable geometry function. Test results from both rig and engine evaluations using natural gas are presented. The variable geometry injector has proven successful in the short-term testing conducted to date. Longer term field tests are planned to demonstrate durability.

Design Improvement Survey for NOx Emissions Reduction of a Heavy-Duty Gas Turbine Partially Premixed Fuel Nozzle Operating With Natural Gas: Numerical Assessment

2015 ◽  
Vol 138 (1) ◽  
Author(s):  
Alessandro Innocenti ◽  
Antonio Andreini ◽  
Bruno Facchini ◽  
Matteo Cerutti ◽  
Gianni Ceccherini ◽  
...  
Keyword(s):  
Gas Turbine ◽  
Turbulent Combustion ◽  
Operating Conditions ◽  
Combustion Model ◽  
Formation Mechanisms ◽  
Heavy Duty ◽  
Flamelet Generated Manifold ◽  
Fuel Nozzle ◽  
Partially Premixed ◽  
Heavy Duty Gas Turbine

A numerical investigation of a low NOx partially premixed fuel nozzle for heavy-duty gas turbine applications is presented in this paper. Availability of results from a recent test campaign on the same fuel nozzle architecture allowed the exhaustive comparison study presented in this work. At first, an assessment of the turbulent combustion model was carried out, with a critical investigation of the expected turbulent combustion regimes in the system and taking into account the partially premixed nature of the flame due to the presence of diffusion type pilot flames. In particular, the fluent partially premixed combustion model and a flamelet approach are used to simulate the flame. The laminar flamelet database is generated using the flamelet generated manifold (FGM) chemistry reduction technique. Species and temperature are parameterized by mixture fraction and progress variable. Comparisons with calculations with partially premixed model and the steady diffusion flamelet (SDF) database are made for the baseline configuration in order to discuss possible gains associated with the introduced dimension in the FGM database (reaction progress), which makes it possible to account for nonequilibrium effects. Numerical characterization of the baseline nozzle has been carried out in terms of NOx. Computed values for both the baseline and some alternative premixer designs have been then compared with experimental measurements on the reactive test rig at different operating conditions and different split ratios between main and pilot fuel. Numerical results allowed pointing out the fundamental NOx formation processes, both in terms of spatial distribution within the flame and in terms of different formation mechanisms. The obtained knowledge would allow further improvement of fuel nozzle design.

Nonlinear Heat-Release/Acoustic Model for Thermoacoustic Instability in Lean Premixed Combustors

1999 ◽  
Vol 121 (3) ◽  
pp. 415-421 ◽  
Author(s):  
A. A. Peracchio ◽  
W. M. Proscia
Keyword(s):  
Heat Release ◽  
Limit Cycle ◽  
Gas Turbines ◽  
Pressure Fluctuations ◽  
Parametric Model ◽  
Operating Conditions ◽  
Cycle Frequency ◽  
Thermoacoustic Instability ◽  
Lean Premixed ◽  
Industrial Gas Turbines

Lean premixed combustors, such as those used in industrial gas turbines to achieve low emissions, are often susceptible to the thermoacoustic combustion instabilities, which manifest themselves as pressure and heat release oscillations in the combustor. These oscillations can result in increased noise and decreased durability due to vibration and flame motion. A physically based nonlinear parametric model has been developed that captures this instability. It describes the coupling of combustor acoustics with the rate of heat release. The model represents this coupling by accounting for the effect of acoustic pressure fluctuations on the varying fuel/air ratio being delivered to the flame, causing a fluctuating heat release due to both fuel air ratio variations and flame front oscillations. If the phasing of the fluctuating heat release and pressure are proper, an instability results that grows into a limit cycle. The nonlinear nature of the model predicts the onset of the instability and additionally captures the resulting limit cycle. Tests of a lean premixed nozzle run at engine scale and engine operating conditions in the UTRC single nozzle rig, conducted under DARPA contract, exhibited instabilities. Parameters from the model were adjusted so that analytical results were consistent with relevant experimental data from this test. The parametric model captures the limit cycle behavior over a range of mean fuel air ratios, showing the instability amplitude (pressure and heat release) to increase and limit cycle frequency to decrease as mean fuel air ratio is reduced.

scholarly journals Comparison of Tabulated and Complex Chemistry Turbulent-Chemistry Interaction Models With High Fidelity Large Eddy Simulations on Hydrogen Flames

2020 ◽  
Author(s):  
M. Zghal ◽  
X. Sun ◽  
P. Q. Gauthier ◽  
V. Sethi
Keyword(s):  
Gas Turbines ◽  
Diffusion Flames ◽  
Computational Cost ◽  
Numerical Approach ◽  
Civil Aviation ◽  
Combustion Model ◽  
Flammability Limits ◽  
Small Diffusion ◽  
Flamelet Generated Manifold ◽  
Complex Chemistry

Abstract Hydrogen micromix combustion is a promising concept to reduce the environmental impact of both aero and land-based gas turbines by delivering carbon-free and ultra-low-NOx combustion without the risk of autoignition or flashback. The EU H2020 ENABLEH2 project aims to demonstrate the feasibility of such a switch to hydrogen for civil aviation, within which the micromix combustion, as a key enabling technology, will be matured to TRL3. The micromix combustor comprises thousands of small diffusion flames where air and fuel are mixed in a crossflow pattern. This technology is based on the idea of minimizing the scale of mixing to maximize mixing intensity. The high-reactivity and wide flammability limits of hydrogen in a micromix combustor can produce short and low-temperature small diffusion flames in lean overall equivalence ratios. In order to mature the hydrogen micromix combustion technology, high quality numerical simulations of the resulting short, thin and highly dynamic hydrogen flames, as well as predictions of combustion species, are essential. In fact, one of the biggest challenges for current CFD has been to accurately model this combustion phenomenon. The Flamelet Generated Manifold (FGM) model is a combustion model that has been used in the past decades for its predicting capabilities and its low computational cost due to its reliance on pre-tabulated combustion chemistry, instead of directly integrating detailed chemistry mechanisms. However, this trade for a lower computational cost may have an impact on the solution, especially when considering a fuel such as Hydrogen. Therefore, it is necessary to compare the FGM model to another combustion modelling approach which uses more detailed complex chemistry. The main focus of this paper then, is to compare the flame characteristics in terms of position, thickness, length, temperature and emissions obtained from LES simulations done with the FGM model, to the results obtained with more complex chemistry models, for hydrogen micromix flames. This will be done using STAR-CCM+ to determine the most suitable numerical approach required for the design of injection systems for ultra-low NOx.

Prediction of CO Emission Index for Aviation Gas Turbine Combustor Using Flamelet Generated Manifold Combustion Model

2021 ◽  
Author(s):  
Saurabh Patwardhan ◽  
Pravin Nakod ◽  
Stefano Orsino ◽  
Rakesh Yadav ◽  
Fang Xu ◽  
...  
Keyword(s):  
Gas Turbine ◽  
Liquid Fuel ◽  
Operating Conditions ◽  
Turbine Engines ◽  
Combustion Model ◽  
Gas Turbine Engines ◽  
Gas Turbine Combustor ◽  
Flamelet Generated Manifold ◽  
Emission Index ◽  
Co Emission

Abstract Carbon monoxide (CO) has been identified as one of the regulated pollutants and gas turbine manufacturers target to reduce the CO emission from their gas turbine engines. CO forms primarily when carbonous fuels are not burnt completely, or products of combustion are quenched before completing the combustion. Numerical simulations are effective tools that allow a better understanding of the mechanisms of CO formation in gas turbine engines and are useful in evaluating the effect of different parameters like swirl, fuel atomization, mixing etc. on the overall CO emission for different engine conditions like idle, cruise, approach and take off. In this paper, a thorough assessment of flamelet generated manifold (FGM) combustion model is carried out to predict the qualitative variation and magnitude of CO emission index with the different configurations of a Honeywell test combustor operating with liquid fuel under idle condition, which is the more critical engine condition for CO emission. The different designs of the test combustor are configured in such a way that they yield different levels of CO and hence are ideal to test the accuracy of the combustion model. Large eddy simulation (LES) method is used for capturing the turbulence accurately along with the FGM combustion model that is computationally economical compared to the detailed/reduced chemistry modeling using finite rate combustion model. Liquid fuel spray breakup is modeled using stochastic secondary droplet (SSD) model. Four different configurations of the aviation gas turbine combustor are studied in this work referring to earlier work by Xu et al. [1]. It is shown that the FGM model can predict CO trends accurately. The other global parameters like exit temperature, NOx emissions, pattern factor also show reasonable agreement with the test data. The sensitivity of the CO prediction to the liquid fuel droplet breakup model parameters is also studied in this work. Although the trend of CO variation is captured for different values of breakup parameters, the absolute magnitude of CO emission index differs significantly with the change in the values of breakup parameters suggesting that the spray has a larger impact on the quantitative prediction of CO emission. An accurate prediction of CO trends at idle conditions using FGM model extends the applicability of FGM model to predict different engine operating conditions for different performance criteria accurately.

A Fully Non-Adiabatic Flamelet Generated Manifold Model for High Fidelity Modeling of Turbulent Combustion in Gas Turbine Like Conditions

2020 ◽  
Author(s):  
Rakesh Yadav ◽  
Ishan Verma ◽  
Abhijit Modak ◽  
Shaoping Li
Keyword(s):  
Experimental Data ◽  
Gas Turbine ◽  
Turbulent Combustion ◽  
Gas Turbines ◽  
Turbulent Flame ◽  
Operating Conditions ◽  
High Fidelity ◽  
Mixture Density ◽  
Flamelet Generated Manifold ◽  
The Impact

Abstract Flamelet Generated Manifold (FGM) has proven to be an efficient approach to model turbulent combustion across different regimes of combustion. The manifolds are generally created by solving laminar premixed or opposed flow configurations. Gas turbine combustors often involve many strong non-adiabatic events such as multiple temperature boundaries, quenching from cooling and effusion holes, conjugate heat transfer, soot radiation interaction, phase change from spray and the modulation of inlet conditions. The adiabatic assumption of the underlying flamelet generation in the FGM is, therefore, prone to errors in the prediction of flame speed, liner temperatures, and pollutant formation. In this work, a novel approach to generate fully non-adiabatic manifold is proposed and validated. The FGM manifold is created using a series of non-adiabatic flamelets, each flamelet is solved in one-dimensional physical space. The non-adiabatic flamelets are generated with an optimal combination of freely propagating and burner stabilized flames. This hybrid method of the flamelet configuration allows modeling large heat gain and loss without encountering any unrealistic temperature in the flamelet solution. Such fully non-adiabatic flamelets are then convoluted to generate a five-dimensional Non-adiabatic Flamelet Generated Manifold (NFGM) Probability Density Function (PDF.). The average properties such as temperature, mixture density, species concentration, rate of reaction, etc. from PDF are then coupled with the CFD solution. The non-adiabatic flamelets and corresponding NFGM is implemented into ANSYS Fluent software version 2020R1. This approach is validated first for canonical cases, followed by gas turbine like conditions of swirl stabilized methane fueled turbulent flame, developed at DLR Stuttgart as the PRECCINSTA combustor. The experimental data for this combustor is available for multiple operating conditions. A stable operating point (φ = 0.83, P = 30 kW) is chosen. The proposed nonadiabatic NFGM is used with Stress blended eddy simulation (SBES). The current NFGM-SBES results are compared with experimental data as well as the previously published works. The impact of modeling heat release in flamelet is used to analyze the M-shape versus V-shape flame transition and the peaks of the carbon monoxide in mixing shear layers. The findings from the current work, in terms of accuracy, validity and best practices while modeling NFGM-SBES are discussed and summarized. The improved results of NFGM compared to adiabatic FGM are encouraging and provides a potential high-fidelity tool for accurate, yet efficient modeling of turbulent combustion inside gas turbines.

Sign in / Sign up

Export Citation Format

Share Document