scholarly journals Ceramic-on-Ceramic Bearing in Total Hip Arthroplasty Reduces the Risk for Revision for Periprosthetic Joint Infection Compared to Ceramic-on-Polyethylene: A Matched Analysis of 118,753 Cementless THA Based on the German Arthroplasty Registry

2021 ◽  
Vol 10 (6) ◽  
pp. 1193
Author(s):  
Lisa Renner ◽  
Carsten Perka ◽  
Oliver Melsheimer ◽  
Alexander Grimberg ◽  
Volkmar Jansson ◽  
...  
Keyword(s):  
Total Hip Arthroplasty ◽  
Hip Arthroplasty ◽  
Periprosthetic Joint Infection ◽  
Science Studies ◽  
Joint Infection ◽  
Total Hip ◽  
Arthroplasty Registry ◽  
Matched Study ◽  
Ceramic On Ceramic

Periprosthetic joint infection (PJI) is one of the most common complications in total hip arthroplasty (THA). The influence of bearing material on the risk of PJI remains unclear to date. This registry-based matched study investigates the role of bearing partners in primary cementless THA. Primary cementless THAs recorded in the German Arthroplasty Registry since 2012 with either a ceramic-on-ceramic (CoC) or ceramic-on-polyethylene (CoP) bearings were included in the analysis. Using propensity score matching (PSM) for age, sex, obesity, diabetes mellitus, Elixhauser comorbidity index, year of surgery and head size, we compared the risk for revision for PJI for CoC and CoP. Within the 115,538 THAs (87.1% CoP; 12.9% CoC), 977 revisions were performed due to PJI. There was a significantly higher risk for revision for PJI for CoP compared with CoC over the whole study period (p < 0.01) after 2:1 matching (CoP:CoC) with a hazard ratio of 1.41 (95% confidence interval (CI), 1.09 to 1.80) After 3 years, the risk for revision for PJI was 0.7% (CI 0.5–0.9%) for CoC and 0.9% (CI 0.8–1.1%) for CoP. The risk for revision for all other reasons except PJI did not significantly differ between the two groups over the whole study period (p = 0.4). Cementless THAs with CoC bearings were less likely to be revised because of infection in mid-term follow-up. In the future, registry-embedded studies focusing on long-term follow-up, including clinical data, as well as basic science studies, may give a deeper insight into the influence of the bearing partners.

scholarly journals A Comparison Study of the Outcomes of Ceramic-on-Ceramic Total Hip Arthroplasty in Young vs Older Patients: A Minimum 10-Year Follow-Up Prospective Matched Study

2019 ◽  
Vol 34 (8) ◽  
pp. 1731-1735
Author(s):  
Gerard Mahiques-Segura ◽  
Alejandro Lizaur-Utrilla ◽  
Maria F. Vizcaya-Moreno ◽  
Fancisco A. Miralles-Muñoz ◽  
Fernando A. Lopez-Prats
Keyword(s):  
Total Hip Arthroplasty ◽  
Hip Arthroplasty ◽  
Older Patients ◽  
Comparison Study ◽  
Total Hip ◽  
Matched Study ◽  
Ceramic On Ceramic

Safety of vitamin E-infused highwall liners for routine use in primary total hip arthroplasty: single centre, short-term follow-up of 1221 cases

2020 ◽  
pp. 112070002096964
Author(s):  
Kirill Gromov ◽  
Nanna H Sillesen ◽  
Thomas Kallemose ◽  
Henrik Husted ◽  
Henrik Malchau ◽  
...  
Keyword(s):  
Patient Safety ◽  
Vitamin E ◽  
Total Hip Arthroplasty ◽  
Hip Arthroplasty ◽  
Single Centre ◽  
Short Term ◽  
Total Hip ◽  
Arthroplasty Registry ◽  
Primary Total Hip Arthroplasty

Background: Introduction of new implants should be monitored closely to capture any signs of compromising patient safety. Vitamin E infused highly-crosslinked polyethylene liners (VEPE) offer the potential for reduced wear. Highwall liners have been hypothesised to result in increased wear and potential liner fractures. The aim of this study was to determine the 3–7-year follow-up of highwall VEPE for primary total hip arthroplasty (THA), focusing on liner-related complications. Methods: We included 1221 consecutive THA operations from July 2010 to May 2014 with minimum follow-up of 3 (3.1–6.8) years Data collected included demographics, implant data, complications, reoperations, and deaths. Data were cross-referenced with the Danish Hip Arthroplasty Registry in order to ensure validity and completeness. Acetabular shell position was measured using Martell Hip Analysis Suite in a subgroup of 931 THAs. Results: Cumulative stem revision and shell revision at 3-year follow-up was 3.4% and 0.4% respectively. There were no revisions due to liner failure. Reason for revision included 11 dislocations, 15 soft-tissue revisions for infection, 44 stem revisions of which 34 were periprosthetic fractures and 13 shell revisions of which 6 were combined shell and stem revisions. Conclusion: Early follow-up of VEPE liners for primary THA have not shown any revisions associated with liner failure. Continued monitoring of new materials are necessary to capture any signs of compromised patient safety.

Treatment for Chronic Hepatitis C Prior to Total Hip Arthroplasty Significantly Reduces Periprosthetic Joint Infection

2019 ◽  
Vol 34 (1) ◽  
pp. 132-135 ◽  
Author(s):  
Hany S. Bedair ◽  
Brian M. Schurko ◽  
Maureen K. Dwyer ◽  
David Novikov ◽  
Afshin A. Anoushiravani ◽  
...  
Keyword(s):  
Chronic Hepatitis ◽  
Hepatitis C ◽  
Total Hip Arthroplasty ◽  
Chronic Hepatitis C ◽  
Hip Arthroplasty ◽  
Periprosthetic Joint Infection ◽  
Joint Infection ◽  
Total Hip

Ceramic on Ceramic Hybrid Type Total Hip Arthroplasty in Patients with more than 65 years of Age -Minimum 5-year Follow-up Results

2008 ◽  
Vol 20 (2) ◽  
pp. 91 ◽  
Author(s):  
Song Lee ◽  
Jin Hak Kim ◽  
Dong Oh Ko ◽  
Young Won Jeon ◽  
Seung Jin Yang ◽  
...  
Keyword(s):  
Total Hip Arthroplasty ◽  
Hip Arthroplasty ◽  
Total Hip ◽  
Hybrid Type ◽  
Ceramic On Ceramic

scholarly journals The influence of bearing surfaces on revisions due to dislocations in total hip arthroplasty

2021 ◽  
Vol 32 (9) ◽  
Author(s):  
Francesco Castagnini ◽  
Barbara Bordini ◽  
Monica Cosentino ◽  
Cristina Ancarani ◽  
Federica Mariotti ◽  
...  
Keyword(s):  
Total Hip Arthroplasty ◽  
Hip Arthroplasty ◽  
Lower Risk ◽  
Time Distribution ◽  
Total Hip ◽  
Arthroplasty Registry ◽  
Metal On Metal ◽  
The Impact ◽  
Frequent Reason ◽  
Ceramic On Ceramic

Abstract Introduction Recurrent dislocations are still the most frequent reason for revision in total hip arthroplasty (THA). The impact of bearing surfaces on dislocations is still controversial. We hypothesized that: (1) bearing surfaces influence the revisions due to dislocations; (2) ceramic-on-ceramic reduced the revisions for dislocations in adjusted models; (3) Delta-on-Delta bearings reduced the revisions for dislocations in comparison to surfaces with cross-linked polyethylene. Materials and methods The regional arthroplasty registry was enquired about bearing surfaces and revisions for dislocations and instability. Unadjusted and adjusted rates were provided, including sex, age (<65 years or ≥65 years), head diameter (≤28 mm or >28 mm; <36 mm or ≥36 mm) as variables. 44,065 THAs were included. Results The rate of revisions for dislocations was significantly lower in ceramic-on-ceramic and metal-on-metal bearings (unadjusted rates). After adjusting for age, sex, and head size (36 and 28 mm), hard-on-hard bearings were protective (p < 0.05): ceramic-on-ceramic had a lower risk of revisions due to dislocation than ceramic-on-polyethylene (HR 1.6, 95% CI 1.2–2.2 p = 0.0009). The rate of revisions for dislocation was similar in bearings with cross-linked polyethylene and Delta-on-Delta articulations, in unadjusted and adjusted models. Conclusion Bearings with conventional polyethylene were more predisposed to dislocations. Currently adopted bearings exerted no significant influence on revisions due to dislocations. These findings could be primarily related to wear, but due to the time distribution, soft tissue envelopes and surface tension may also play a role. Pre-clinical biomechanical evaluations and prospective matched cohort studies are required to draw definitive conclusions.

3rd generation ceramic-on-ceramic cementless total hip arthroplasty: a minimum 10-year follow-up study

2018 ◽  
Vol 28 (2) ◽  
pp. 133-138 ◽  
Author(s):  
Yeong J. Lau ◽  
Shashank Sarmah ◽  
Johan D. Witt
Keyword(s):  
Total Hip Arthroplasty ◽  
Hip Arthroplasty ◽  
Senior Author ◽  
Long Term Results ◽  
Abduction Angle ◽  
Wear Properties ◽  
Total Hip ◽  
Ceramic On Ceramic

Introduction: 3rd generation ceramic bearings were introduced in total hip arthroplasty (THA) with the potential to have better mechanical strength and wear properties than their predecessors. At present, there are few studies looking at the long-term results of this latest generation of ceramic bearings. The purpose of our study was to investigate the long-term clinical and radiographic results of 3rd generation ceramic-on-ceramic THA and the incidence of ceramic specific complications such as squeaking and bearing surface fracture. Methods: The database of the senior author (J.D.W.) was reviewed. A total of 126 hip replacements performed in 108 patients (average age 39.6 years) with an average follow-up of 12.1 years (10-16 years) was identified. Clinical notes and plain radiographs were reviewed. To measure function, patients were contacted and an Oxford Hip Questionnaire was completed. Patients were also directly questioned about the presence of squeaking or any other sounds from the hip. Radiographs were evaluated for signs of wear, osteolysis, loosening and heterotopic ossification. The abduction angle of the acetabular component was measured. Results: The average Oxford Hip Score was 39.8 out of 48. Survivorship at 10 years was 94.6% (95% CI) with revision for any cause as the endpoint. There was 1 femoral head fracture, no osteolysis, no squeaking and no detectable wear. Conclusions: The good clinical and radiographic results for this series of patients are similar to other recent long-term studies looking at 3rd generation ceramic-on-ceramic THA. The results compare favourably with other bearing surfaces. The lack of osteolysis associated with this articulation is encouraging and may also make it a good choice for younger patients requiring total hip replacement.

The effect of bearing surface on risk of periprosthetic joint infection in total hip arthroplasty

2018 ◽  
Vol 100-B (2) ◽  
pp. 134-142 ◽  
Author(s):  
A. T. Hexter ◽  
S. M. Hislop ◽  
G. W. Blunn ◽  
A. D. Liddle
Keyword(s):  
Total Hip Arthroplasty ◽  
Hip Arthroplasty ◽  
Periprosthetic Joint Infection ◽  
Observational Studies ◽  
Meta Analysis ◽  
Joint Infection ◽  
Risk Of Bias ◽  
Cochrane Library ◽  
Bearing Surface ◽  
Total Hip

Aims Periprosthetic joint infection (PJI) is a serious complication of total hip arthroplasty (THA). Different bearing surface materials have different surface properties and it has been suggested that the choice of bearing surface may influence the risk of PJI after THA. The objective of this meta-analysis was to compare the rate of PJI between metal-on-polyethylene (MoP), ceramic-on-polyethylene (CoP), and ceramic-on-ceramic (CoC) bearings. Patients and Methods Electronic databases (Medline, Embase, Cochrane library, Web of Science, and Cumulative Index of Nursing and Allied Health Literature) were searched for comparative randomized and observational studies that reported the incidence of PJI for different bearing surfaces. Two investigators independently reviewed studies for eligibility, evaluated risk of bias, and performed data extraction. Meta-analysis was performed using the Mantel–Haenzel method and random-effects model in accordance with methods of the Cochrane group. Results Our search strategy revealed 2272 studies, of which 17 met the inclusion criteria and were analyzed. These comprised 11 randomized controlled trials and six observational studies. The overall quality of included studies was high but the observational studies were at high risk of bias due to inadequate adjustment for confounding factors. The overall cumulative incidence of PJI across all studies was 0.78% (1514/193 378). For each bearing combination, the overall incidence was as follows: MoP 0.85% (1353/158 430); CoP 0.38% (67/17 489); and CoC 0.53% (94/17 459). The meta-analysis showed no significant difference between the three bearing combinations in terms of risk of PJI. Conclusion On the basis of the clinical studies available, there is no evidence that bearing choice influences the risk of PJI. Future research, including basic science studies and large, adequately controlled registry studies, may be helpful in determining whether implant materials play a role in determining the risk of PJI following arthroplasty surgery. Cite this article: Bone Joint J 2018;100-B:134–42.

Recalcitrant Periprosthetic Joint Infection With Iliac Fossa Abscess After Total Hip Arthroplasty

2021 ◽  
Author(s):  
Kuo-Ti Peng ◽  
Tsung-Yu Huang ◽  
Jiun-Liang Chen ◽  
Chiang-Wen Lee ◽  
Hsin-Nung Shih
Keyword(s):  
Total Hip Arthroplasty ◽  
Treatment Failure ◽  
Hip Arthroplasty ◽  
Periprosthetic Joint Infection ◽  
Iliac Fossa ◽  
Joint Infection ◽  
Treatment Success ◽  
Anterolateral Approach ◽  
Total Hip ◽  
Orthopedic Procedure

Abstract Background: Total hip arthroplasty (THA) is a widely used and successfully performed orthopedic procedure for treating severe hip osteoarthritis, rheumatoid arthritis, and avascular necrosis. However, periprosthetic joint infection (PJI) after THA is a devastating complication for patients and orthopedic surgeons. Although surgical technology has been advanced and antibiotic-loaded cemented spacers or beads have developed, the treatment failure rate of one- or two-stage exchange arthroplasty for PJI is reported to be high, with >10% rate of incidence. Therefore, determining the possible pathogenesis and increasing the treatment success rate is a clinically important and urgent issue. Methods: A total of 256 patients with PJI who had undergone THA from 2005 to 2015 were included in this retrospective review. Seven patients required combined ilioinguinal and anterlateoal approach for debridement of iliac fossa abscess and infected hip lesion, included five patients with intraoperative pus leakage from the acetabular inner wall and the other two patients who underwent pre-operative pelvic computed tomography (CT) because of repeat PJI treatment failure. All available data from the medical records from all patients were retrospectively analyzed.Results: Of the 256 patients, seven (3.1%) patients was combined iliac fossa abscess in our cohort. For the microbiologic analysis, a total of thirteen pathogens were isolated from seven recurrent PJI patients with iliac fossa abscess, and Staphylococus aureus was the most commomly pathogen (4 out of 7 cases). The serum white blood cell (WBC) count was decreased significantly two weeks after debridement with combined the ilioinguinal and anterolateral approach compared to the day before surgery (11840/μL vs. 7370/μL; p<0.01), and level of C-reactive protein (CRP) was decreased at postoperative one week (107 mg/dL vs. 47.31 mg/dL; p=0.03). Furthermore, no recurrent infection was found in six revision THA patient in a follow up of 7.1 year. Conclusion: This result suggests that pre-operative pelvic CT and cautious identification of uncertain pus leakage from the inner wall of the acetabulum is essential for the diagnosis of recurrent PJI. Radical debridement with combined ilioinguinal and anterlateoal approach may aviod treatment failure in recurrent PJI with iliac fossa abscess.

Sign in / Sign up

Export Citation Format

Share Document