scholarly journals Experimental and Computational Analysis of Low-Velocity Impact on Carbon-, Glass- and Mixed-Fiber Composite Plates

2020 ◽  
Vol 4 (4) ◽  
pp. 148
Author(s):  
Ahmed S. AlOmari ◽  
Khaled S. Al-Athel ◽  
Abul Fazal M. Arif ◽  
Faleh. A. Al-Sulaiman
Keyword(s):  
Composite Laminates ◽  
Impact Damage ◽  
Fiber Composite ◽  
Impact Resistance ◽  
Composite Plates ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Damage Resistance ◽  
Velocity Impact ◽  
Delamination Damage

One of the problems with composites is their weak impact damage resistance and post-impact mechanical properties. Composites are prone to delamination damage when impacted by low-speed projectiles because of the weak through-thickness strength. To combat the problem of delamination damage, composite parts are often over-designed with extra layers. However, this increases the cost, weight, and volume of the composite and, in some cases, may only provide moderate improvements to impact damage resistance. The selection of the optimal parameters for composite plates that give high impact resistance under low-velocity impact loads should consider several factors related to the properties of the materials as well as to how the composite product is manufactured. To obtain the desired impact resistance, it is essential to know the interrelationships between these parameters and the energy absorbed by the composite. Knowing which parameters affect the improvement of the composite impact resistance and which parameters give the most significant effect are the main issues in the composite industry. In this work, the impact response of composite laminates with various stacking sequences and resins was studied with the Instron 9250G drop-tower to determine the energy absorption. Three types of composites were used: carbon-fiber, glass-fiber, and mixed-fiber composite laminates. Also, these composites were characterized by different stacking sequences and resin types. The effect of several composite structural parameters on the absorbed energy of composite plates is studied. A finite element model was then used to find an optimized design with improved impact resistance based on the best attributes found from the experimental testing.

Damage Characterization of Carbon and Glass Fiber Composite Plates Subjected to Low-Velocity Impact Using Thermography

2018 ◽  
Author(s):  
Khaled S. Al-Athel ◽  
Ahmed Alomari ◽  
Abul Fazal M. Arif
Keyword(s):  
Glass Fiber ◽  
Composite Laminates ◽  
Impact Damage ◽  
Fiber Composite ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Velocity Impact ◽  
Damage Characterization ◽  
Post Impact

Composites are prone to delamination damage when impacted by low velocity projectiles because of the poor through-thickness strength. Therefore, some of the problems with composites are their poor impact damage resistance, weak post-impact mechanical properties, and the difficulty to inspect the impacted area by nondestructive means. Damage characterization of composite materials requires a scientific methodology, knowledge of polymeric materials, and direct field experience. In this work, low-velocity impact response of composite laminates was experimentally studied using drop-tower to determine the energy absorption. Three types of composites were used: carbon fiber, glass fiber, and mixed fiber composite laminates. In addition, these composites were characterized using thermography to quantify their post impact damage. It was found with the 3D temperature distribution that a strong correlation can be determined between the measured temperatures at the impact region with the quantification of the damage using thermal imaging with advanced mid-wave camera.

Analysis of Patch Bonded Repair to Carbon Fiber Composite Laminates with Low Velocity Impact Damage

2011 ◽  
Vol 335-336 ◽  
pp. 226-229
Author(s):  
Lun Wang ◽  
Wan Lin Zhou ◽  
Xue Gang Shi
Keyword(s):  
Carbon Fiber ◽  
Composite Laminates ◽  
Impact Damage ◽  
Fiber Composite ◽  
Element Model ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Carbon Fiber Composite ◽  
Velocity Impact ◽  
Bonded Repair

In this paper, low-velocity impact residual tensile strength of carbon fiber composite laminates are investigated by experiment. The triple-plate-string-element finite element model was used to calculate the strength of repaired structures of the damage. The corresponding strength tests were conducted to verify the computational results. According to the computational and experimental results, the influence of the repair parameters on the repair efficiency was analyzed, such as the overlap length and the thickness of the patch.

TEMPERATURE EFFECT OF LOW VELOCITY IMPACT RESISTANCE OF GLASS/EPOXY LAMINATES

2010 ◽  
Vol 24 (15n16) ◽  
pp. 2657-2663 ◽  
Author(s):  
KI-WEON KANG ◽  
HEUNG-SEOB KIM ◽  
TAE-JIN CHUNG ◽  
SEUNG-KEE KOH
Keyword(s):  
Composite Laminates ◽  
Impact Damage ◽  
Testing Machine ◽  
Impact Resistance ◽  
Impact Testing ◽  
Low Velocity Impact ◽  
Effect Of Temperature ◽  
Low Velocity ◽  
Damage Resistance ◽  
The Impact

This paper aims to evaluate the effect of temperature on impact damage resistance of glass/epoxy laminates. A series of impact tests were performed using an instrumented impact-testing machine at temperature ranging from -40°C to +80°C. The resulting impact damage was measured using back light method. The impact resistance parameters were employed to understand the damage resistance. It was observed that temperature has a little effect on the impact responses of composite laminates. The damage resistance of glass/epoxy laminates is somewhat deteriorated at two opposite extremes of the studied temperature range and this behavior is likely due to the property change of glass/epoxy laminates under extreme temperatures

Impact Damage Research of Sandwich Composite Laminates

2013 ◽  
Vol 710 ◽  
pp. 136-141
Author(s):  
Li Jun Wei ◽  
Fang Lue Huang ◽  
Hong Peng Li
Keyword(s):  
Compressive Strength ◽  
Composite Laminates ◽  
Impact Damage ◽  
Low Velocity Impact ◽  
Sandwich Composite ◽  
Low Velocity ◽  
Compression Process ◽  
Velocity Impact ◽  
Residual Compressive Strength ◽  
Core Materials

Sandwich composite laminates structure is a classic application of composite material on actual aircraft structural. Dealing with low-velocity impact damage and residual compressive strength of sandwich composite laminates, explicit finite element method of ABAQUS/Explicit software was adopted to simulate low-velocity impact and compression process. Impact response and invalidation on compression between sandwich composite laminates with different core materials and regular composite laminates were compared. The simulation results indicated that softer core materials can absorb more impact energy, reduce the structure damage and enhance the residual compressive strength after impact.

Low-Velocity Impact Characteristics of Carbon Fiber Composites Lattice Core Sandwich Structures

2009 ◽  
Vol 79-82 ◽  
pp. 127-130 ◽  
Author(s):  
Shi Xun Wang ◽  
Lin Zhi Wu ◽  
Li Ma
Keyword(s):  
Carbon Fiber ◽  
Sandwich Structures ◽  
Impact Damage ◽  
Composite Plates ◽  
Fiber Composites ◽  
Low Velocity Impact ◽  
Carbon Fiber Composites ◽  
Low Velocity ◽  
Velocity Impact ◽  
Numerical Predictions

Since composite sandwich structures are susceptible to low-velocity impact damage, a thorough characterization of the loading and damage process during impact is important. In the present paper, the low-velocity impact response of carbon fiber composites lattice structures are investigated by experimental and numerical methods. Impact tests on composite plates are performed using an instrumented drop-weight machine (Instron 9250HV) and a new damage mode is observed. A three-dimensional finite element model is built by ABAQUS/Explicit and user subroutine (VUMAT) to predict the peak loading and simulate the complicated damage problem. It can be found that numerical predictions coincide well with experimental results.

Sign in / Sign up

Export Citation Format

Share Document