scholarly journals Random Wave-Induced Momentary Liquefaction around Rubble Mound Breakwaters with Submerged Berms

2020 ◽  
Vol 8 (5) ◽  
pp. 338
Author(s):  
Daniele Celli ◽  
Yuzhu Li ◽  
Muk Chen Ong ◽  
Marcello Di Risio
Keyword(s):  
Irregular Waves ◽  
Random Wave ◽  
Random Waves ◽  
Regular Waves ◽  
Peak Period ◽  
Soil Response ◽  
Minimum Number ◽  
Rubble Mound ◽  
Wave Induced ◽  
Rubble Mound Breakwaters

The effects of submerged berms in attenuating the momentary liquefaction beneath rubble mound breakwaters under regular waves were investigated in a recent study. The present work aims to investigate the momentary liquefaction probabilities around and beneath breakwaters with submerged berms under random waves. The interaction between waves and breakwaters with submerged berms has been simulated through a phase-resolving numerical model. The soil response to the seabed pressure induced by random waves has been investigated using a poro-elastic soil solver. For three different breakwater configurations, the liquefaction depths under random wave conditions have been compared with those cases under representative regular waves. In the present study, the offshore spectral wave height ( H m 0 ) and the peak period ( T p ) of irregular waves are used as representative regular wave parameters. Results reveal the importance of considering random waves for a safe estimation of the momentary liquefaction probability. Indication about the minimum number of random waves, which is required to properly catch the liquefaction occurrences, has been also addressed.

Response of a Porous Seabed Under Random Wave Loading

2006 ◽  
Author(s):  
Haijiang Liu ◽  
Dong-S. Jeng
Keyword(s):  
Soil Parameters ◽  
Random Wave ◽  
Wave Loading ◽  
Random Waves ◽  
Regular Waves ◽  
Offshore Pipelines ◽  
Soil Response ◽  
Significant Difference ◽  
Wave Induced ◽  
Soil Responses

The evaluation of the wave-induced soil response is particularly important for many coastal engineering installations such as offshore pipelines, platforms and breakwaters. Most previous investigations have been limited to the linear regular wave loading, even though the real situation is under random waves. In this study, we propose a semi-analytical solution for the random wave-induced pore pressure and effective stresses in marine sediments. Based on the new analytical solutions, different soil responses under the random wave loading are investigated and compared with the corresponding results under the linear regular waves. Numerical examples demonstrate the significant difference on wave-induced seabed response between these two wave loadings due to the irregularity introduced by the random waves. Finally, the influence of several soil parameters on the soil response under random wave loading is also examined.

scholarly journals Time Scale for Scour Beneath Pipelines Due to Long-Crested and Short-Crested Nonlinear Random Waves Plus Current

2021 ◽  
Vol 9 (2) ◽  
pp. 114
Author(s):  
Dag Myrhaug ◽  
Muk Chen Ong
Keyword(s):  
Time Scale ◽  
Current Flow ◽  
Irregular Waves ◽  
Wave Crest ◽  
Random Wave ◽  
Random Waves ◽  
Flow Conditions ◽  
Regular Waves ◽  
Nonlinear Random Waves ◽  
2D And 3D

This article derives the time scale of pipeline scour caused by 2D (long-crested) and 3D (short-crested) nonlinear irregular waves and current for wave-dominant flow. The motivation is to provide a simple engineering tool suitable to use when assessing the time scale of equilibrium pipeline scour for these flow conditions. The method assumes the random wave process to be stationary and narrow banded adopting a distribution of the wave crest height representing 2D and 3D nonlinear irregular waves and a time scale formula for regular waves plus current. The presented results cover a range of random waves plus current flow conditions for which the method is valid. Results for typical field conditions are also presented. A possible application of the outcome of this study is that, e.g., consulting engineers can use it as part of assessing the on-bottom stability of seabed pipelines.

scholarly journals OVERTOPPING OF RUBBLE-MOUND BREAKWATERS BY IRREGULAR WAVES

1976 ◽  
Vol 1 (15) ◽  
pp. 157
Author(s):  
Yvon Ouellet ◽  
Pierre Eubanks
Keyword(s):  
Wave Train ◽  
The Other ◽  
Irregular Waves ◽  
Regular Wave ◽  
Regular Waves ◽  
Irregular Wave ◽  
Wave Trains ◽  
Rubble Mound ◽  
The Stability ◽  
Rubble Mound Breakwaters

This paper describes the results of an experimental study on the effect of waves on rubble-mound breakwaters, wave transmission subsequent to wave overtopping, the stability of the three sides subjected to wave action and the effect of the breakwaters on waves. Two different rubble-mound breakwaters were tested, i. e. one with a rigid impermeable crest and the other with a flexible permeable crest. Tests were performed with both regular and irregular wave train systems. To obtain the simulated irregular wave trains, four theoretical spectra were chosen: Neumann, Bretschneider, Moskowitz, and Scott. Results obtained from tests with irregular wave trains were compared to those obtained from tests with regular wave trains. It was found that more information was obtained on the behaviour of the structure when it was submitted to the attack of irregular waves than when submitted to regular waves, and that the use of irregular wave trains gave more interesting results.

scholarly journals THE STABILITY OF RUBBLE MOUND BREAKWATERS AGAINST IRREGULAR WAVES

1966 ◽  
Vol 1 (10) ◽  
pp. 54 ◽  
Author(s):  
Torkild Carstens ◽  
Alf Torum ◽  
Anton Tratteberg
Keyword(s):  
Wave Spectrum ◽  
Model Tests ◽  
Irregular Waves ◽  
Regular Waves ◽  
Destructive Effect ◽  
Wave Channel ◽  
Stability Data ◽  
Rubble Mound ◽  
The Stability ◽  
Rubble Mound Breakwaters

Through extensive model tests with rubble mound breakwaters conducted in many laboratories in recent years design criteria and stability data have been collected. To our knowledge such data have been based on tests with regular waves only. It has been more or less accepted that the destructive effect of a train of regular waves corresponds to a confused sea with a significant wave height equal to the height of the regular waves. At the Rxver and Harbour Research Laboratory at the Technical University of Norway a new wave channel has been equipped with a programmed wave generator which can produce irregular waves wxth any wanted wave spectrum. This paper deals with model tests of the stability of rubble mound breakwaters against irregular waves as compared with regular waves.

scholarly journals Random wave-driven drag forces on near-bed vegetation in shallow water based on deepwater wind conditions

2019 ◽  
Vol 233 (4) ◽  
pp. 1287-1290
Author(s):  
Dag Myrhaug
Keyword(s):  
Shallow Water ◽  
Drag Force ◽  
Wind Waves ◽  
Wave Spectrum ◽  
Random Wave ◽  
Random Waves ◽  
Coastal Zones ◽  
Drag Forces ◽  
Mean Wind Speed ◽  
Wave Induced

This article provides a simple analytical method for giving estimates of random wave-driven drag forces on near-bed vegetation in shallow water from deepwater wind conditions. Results are exemplified using a Pierson–Moskowitz model wave spectrum for wind waves with the mean wind speed at the 10 m elevation above the sea surface as the parameter. The significant value of the drag force within a sea state of random waves is given, and an example typical for field conditions is presented. This method should serve as a useful tool for assessing random wave-induced drag force on vegetation in coastal zones and estuaries based on input from deepwater wind conditions.

CFD Analysis of Deck Impact in Irregular Waves: Wave Representation by Transient Wave Groups

2011 ◽  
Author(s):  
O̸ystein Lande ◽  
Thomas B. Johannessen
Keyword(s):  
Wave Field ◽  
Irregular Waves ◽  
Computational Domain ◽  
Cfd Analysis ◽  
Wave Group ◽  
Regular Waves ◽  
Transient Wave ◽  
Wave Groups ◽  
Wave Induced ◽  
Random Background

Analysis of wave structure interaction problems are increasingly handled by employing CFD methods such as the well known Volume-of-Fluid (VoF) method. In particular for the problem of deck impact on fixed structures with slender substructures, CFD methods have been used extensively in the last few years. For this case, the initial conditions have usually been treated as regular waves in an undisturbed wave field which may be given accurately as input. As CFD analyses become more widely available and are used for more complex problems it is also necessary to consider the problem of irregular waves in a CFD context. Irregular waves provide a closer description of the sea surface than regular waves and are also the chief source of statistical variability in the wave induced loading level. In general, it is not feasible to run a long simulation of an irregular seastate in a CFD analysis today since this would require very long simulation times and also a very large computational domain and sophisticated absorbing boundary conditions to avoid build-up of reflections in the domain. The present paper is concerned with the use of a single transient wave group to represent a large event in an irregular wave group. It is well known that the autocovariance function of the wave spectrum is proportional to the mean shape of a large wave in a Gaussian wave field. The transient nature of such a wave ensures that a relatively small wave is generated at the upwave boundary and dissipated at the downwave boundary compared with the wave in the centre of the domain. Furthermore, a transient wave may be embedded in a random background if it is believed that the random background is important for the load level. The present paper describes the method of generating transient wave groups in a CFD analysis of wave in deck impact. The evolution of transient wave groups is first studied and compared with experimental measurements in order to verify that nonlinear transient waves can be calculated accurately using the present CFD code. Vertical wave induced loads on a large deck is then investigated for different undisturbed wave velocities and deck inundations.

scholarly journals ROUGHNESS FACTOR FOR MULTI-LAYER ARMOUR AS OVERTOPPING ESTIMATOR

2020 ◽  
pp. 25
Author(s):  
Leopoldo Franco ◽  
Yuri Pepi ◽  
Stefano de Finis ◽  
Verdiana Iorio ◽  
Giorgio Bellotti ◽  
...  
Keyword(s):  
Structural Characteristics ◽  
Storm Surges ◽  
Random Wave ◽  
Roughness Factor ◽  
Coastal Structures ◽  
Wave Overtopping ◽  
Wave Flume ◽  
Physical Model Tests ◽  
Rubble Mound ◽  
Rubble Mound Breakwaters

Nowadays one of the most challenging problem for engineers is to adapt existing coastal structures to climate changes. Wave overtopping is highly sensitive to the increasing extreme water depths due to higher storm surges coupled with sea level rise. One way to face these problems for rubble mound breakwaters is to add one or more layers to the existing armour. Prediction of wave overtopping of coastal structures is presently obtained from empirical formulae in EurOtop (2018). For the case of overtopping over multi-layer armour, no validated method exists, so prediction must be based upon assumptions and judgement, with related uncertainties. This study is focused on the effects of different types of armour, the number of layer and other structural characteristics on the roughness factor f. The main effects of porosity and roughness will be investigated. This paper analyzes the results of several new physical model tests of different rubble mound breakwaters reproduced at the new medium scale random wave flume of the Department of Engineering of Roma Tre University.Recorded Presentation from the vICCE (YouTube Link): https://youtu.be/8cOdqkqQ-9s

scholarly journals WAVE OVERTOPPING ON RUBBLE MOUND BREAKWATERS

1988 ◽  
Vol 1 (21) ◽  
pp. 57 ◽  
Author(s):  
Pierliugi Aminti ◽  
Leopoldo Franco
Keyword(s):  
Hydraulic Model ◽  
Model Tests ◽  
Geometric Parameters ◽  
Random Wave ◽  
Wave Overtopping ◽  
Wave Flume ◽  
Rubble Mound ◽  
Rubble Mound Breakwaters

The paper gives the results of an extensive series of hydraulic model tests carried out in a random wave flume, in order to study the effects on wave overtopping of the main geometric parameters of a typical rubble mound breakwater with crown wall. The results have been compared with those from other studies and analyzed with different methods. Generalized design diagrams and formulae for the prediction of overtopping discharges are finally given for a large number of popular breakwater configurations.

Sign in / Sign up

Export Citation Format

Share Document