scholarly journals Proposal of a Nomenclature for Hydrogeological Instability Risks and Case Studies of Conservative Soil Tillage for Environmental Protection

Land ◽  
2022 ◽  
Vol 11 (1) ◽  
pp. 108
Author(s):  
Davide Puccio ◽  
Antonio Comparetti ◽  
Carlo Greco ◽  
Salvatore Raimondi

In order to implement environmental protection, within the Soil Cadastre, previously proposed as a multipurpose inventory that aims to promote sustainable soil uses, the hydrogeological instability caused by human activities is the focus of this work. These activities can be aimed at sustainable agricultural soil use or the building of roads to allow the access to the fields. The soil’s hydrogeological instability causes the unsustainable use and management of a cadastral parcel. Therefore, the aim of this work is to propose a nomenclature for hydrogeological instability risks, as well as the best practices of conservative soil tillage in case studies, in order to reduce environmental impact. According to the proposed Soil Cadastre, the missing environmental sustainability of a parcel and the reason for this must be communicated to the field owner or manager. In a hilly area of inland Western Sicily, four main risk types of hydrogeological instability were identified: hydrogeological instability (caused only by natural factors); hydraulic-pedological farming instability (crop not suitable for the field for missing or insufficient soil drainage and landslides); hydraulic-infrastructural instability (built up infrastructures unsuitable for the site); hydraulic-infrastructural-pedological-management instability (field improvements changing the downflow line and crop operations not suitable for the soil and climate parameters). The farm owner or manager must be informed about the risk type affecting their fields in order to perform the best practices (i.e., conservative soil tillage), for implementing or restoring a sustainable soil use or management in each cadastral parcel.

2019 ◽  
pp. 123-130

The scientific research works concerning the field of mechanical engineering such as, manufacturing machine slate, soil tillage, sowing and harvesting based on the requirements for the implementation of agrotechnical measures for the cultivation of plants in its transportation, through the development of mastering new types of high-performance and energy-saving machines in manufacturing machine slate, creation of multifunctional machines, allowing simultaneous soil cultivation, by means of several planting operations, integration of agricultural machine designs are taken into account in manufacturing of the local universal tractor designed basing on high ergonomic indicators. For this reason, this article explores the use of case studies in teaching agricultural terminology by means analyzing the researches in machine building. Case study method was firstly used in 1870 in Harvard University of Law School in the United States. Also in the article, we give the examples of agricultural machine-building terms, teaching terminology and case methods, case study process and case studies method itself. The research works in the field of mechanical engineering and the use of case studies in teaching terminology have also been analyzed. In addition, the requirements for the development of case study tasks are given in their practical didactic nature. We also give case study models that allow us analyzing and evaluating students' activities.


1989 ◽  
Vol 21 (6-7) ◽  
pp. 685-698
Author(s):  
J. J. Convery ◽  
J. F. Kreissl ◽  
A. D. Venosa ◽  
J. H. Bender ◽  
D. J. Lussier

Technology transfer is an important activity within the ll.S. Environmental Protection Agency. Specific technology transfer programs such as the activities of the Center for Environmental Research Information, the Innovative and Alternative Technology Program, as well as the Small Community Outreach Program are used to encourage the utilization of cost-effective municipal pollution control technology. Case studies of three technologies including a plant operations diagnostic/remediation methodology, alternative sewer technologies and ultraviolet disinfection are presented. These case studies are presented retrospectively in the context of a generalized concept of how technology flows from science to utilization which was developed in a study by Allen (1977). Additional insights from this study are presented on the information gathering characteristics of engineers and scientists which may be useful in designing technology transfer programs. The recognition of the need for a technology or a deficiency in current practice are important stimuli other than technology transfer for accelerating the utilization of new technology.


1994 ◽  
Vol 30 (3) ◽  
pp. 1-9
Author(s):  
Francisco Fontes Lima ◽  
Francisco Alves Pereira

This paper describes the findings of the “Third International Conference on Waste Management in the Chemical and Petrochemical Industries,” held in Salvador, Brazil, October 20-23, 1993. A summary of the 74 technical papers, divided into six major categories, is presented together with comments on the more stringent legislation concerning source control programmes. Case studies of two large chemical complexes that have been developing successful waste minimization programmes are described in detail: CETREL-Environmental Protection Company in Camaçari, Brazil, and BASF AG in Ludwigshafen, Germany.


2021 ◽  
Vol 9 (2) ◽  
pp. 105-111
Author(s):  
Ana Prados ◽  
Erika Podest ◽  
David G Barbato ◽  
Annelise Carleton-Hug ◽  
Brock Blevins ◽  
...  

2021 ◽  
Vol 13 (9) ◽  
pp. 5069
Author(s):  
Aitziber Egusquiza ◽  
Mikel Zubiaga ◽  
Alessandra Gandini ◽  
Claudia de Luca ◽  
Simona Tondelli

This paper presents the result of the analysis of the data gathered from 20 Role Models (RM) case studies regarding their successful heritage-led rural regeneration models. For the study and comparison of the narratives of these Role Models two tools were used: the Community Capitals Framework, which studied the transference of capitals in each process and the identification of six Systemic Innovation Areas that allow this capital transference. A multilevel repository of best practices has been developed allowing the identification of common features, mechanisms for mobilisation of capitals and required resources that will facilitate the replication in other rural areas. The results of this work support the acknowledgement of the contribution of culture, together with cultural and natural heritage, to economic growth, social inclusion and environmental sustainability in rural areas reinforcing the role of culture as the fourth pillar of sustainable development.


2014 ◽  
Author(s):  
John Bonar ◽  
D.J. Snyder ◽  
Brittany Dale Miller ◽  
Lonnie Jeffers

2015 ◽  
Vol 10 (1s) ◽  
Author(s):  
Mauro Salis ◽  
Lucia Sepe ◽  
Rosa Francaviglia ◽  
Marco Fedrizzi ◽  
Paolo Bazzoffi ◽  
...  

The paper presents the main results of the monitoring on the effectiveness of the cross-compliance Standard 4.1 ‘Permanent pasture protection: lett. b, c’ carried out in two case studies within the project MO.NA.CO. Soil, botanical, productive and economic (competitiveness gap) parameters have been monitored. In the short term, the Standard 4.1 showed its effectiveness on soil quality, biomass productivity and competitiveness gap in both case studies. Botanical parameters showed differing results, therefore their generalization is not applicable to the heterogeneity of the pasture land Italian system. Shallow soil tillage could be suggested, every 40-50 years, when an appropriate soil organic matter content and the absence of runoff phenomena occur.


2018 ◽  
Vol 22 (1) ◽  
pp. 107-118 ◽  
Author(s):  
  Nguyen-Van-Hung ◽  
  Tran-Van-Tuan ◽  
Pyseth Meas ◽  
Caesar Joventino M. Tado ◽  
Myo Aung Kyaw ◽  
...  
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document