scholarly journals Stabilization of Ferroelectric Phase in Highly Oriented Quinuclidinium Perrhenate (HQReO4) Thin Films

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2126
Author(s):  
Junyoung Lee ◽  
Woojun Seol ◽  
Gopinathan Anoop ◽  
Shibnath Samanta ◽  
Sanjith Unithrattil ◽  
...  

The low-temperature processability of molecular ferroelectric (FE) crystals makes them a potential alternative for perovskite oxide-based ferroelectric thin films. Quinuclidinium perrhenate (HQReO4) is one such molecular FE crystal that exhibits ferroelectricity when crystallized in an intermediate temperature phase (ITP). However, bulk HQReO4 crystals exhibit ferroelectricity only for a narrow temperature window (22 K), above and below which the polar phase transforms to a non-FE phase. The FE phase or ITP of HQReO4 should be stabilized in a much wider temperature range for practical applications. Here, to stabilize the FE phase (ITP) in a wider temperature range, highly oriented thin films of HQReO4 were prepared using a simple solution process. A slow evaporation method was adapted for drying the HQReO4 thin films to control the morphology and the temperature window. The temperature window of the intermediate temperature FE phase was successfully widened up to 35 K by merely varying the film drying temperature between 333 and 353 K. The strategy of stabilizing the FE phase in a wider temperature range can be adapted to other molecular FE materials to realize flexible electronic devices.

2010 ◽  
Vol 25 (6) ◽  
pp. 1105-1117 ◽  
Author(s):  
Randy A. Mrozek ◽  
Phillip J. Cole ◽  
Shannon M. Cole ◽  
John L. Schroeder ◽  
Duane A. Schneider ◽  
...  

Polymer gels have potential use for a wide variety of applications, primarily due to the ability to tailor the gel properties by varying several material parameters. While substantial attention has focused on water-based hydrogels, the use of these materials is limited due to a narrow operational temperature range. This report describes a nonaqueous polymer gel, composed of a cross-linked polybutadiene network swollen with low volatility polymer plasticizers. Thermal, mechanical, and adhesive characterization illustrated that the gels exhibit performance over an extremely broad temperature range (−60–70 °C). Solvent quality and loading played a critical role in the operational temperature window with small solvent solubility parameter deviations dramatically reducing the operational temperature range. In addition, the processing conditions had a large impact on the gel mechanical properties. As a result, it is important to consider the influence of processing conditions and solvent quality when tailoring polymer gels for practical applications.


Author(s):  
J.P.S. Hanjra

Tin mono selenide (SnSe) with an energy gap of about 1 eV is a potential material for photovoltaic applications. Various authors have studied the structure, electronic and photoelectronic properties of thin films of SnSe grown by various deposition techniques. However, for practical photovoltaic junctions the electrical properties of SnSe films need improvement. We have carried out investigations into the properties of flash evaporated SnSe films. In this paper we report our results on the structure, which plays a dominant role on the electrical properties of thin films by TEM, SEM, and electron diffraction (ED).Thin films of SnSe were deposited by flash evaporation of SnSe fine powder prepared from high purity Sn and Se, onto glass, mica and KCl substrates in a vacuum of 2Ø micro Torr. A 15% HF + 2Ø% HNO3 solution was used to detach SnSe film from the glass and mica substrates whereas the film deposited on KCl substrate was floated over an ethanol water mixture by dissolution of KCl. The floating films were picked up on the grids for their EM analysis.


2019 ◽  
Vol 53 (5) ◽  
pp. 593-598 ◽  
Author(s):  
V. A. Komarov ◽  
V. M. Grabov ◽  
A. V. Suslov ◽  
N. S. Kablukova ◽  
M. V. Suslov
Keyword(s):  

2009 ◽  
Vol 26 (4) ◽  
pp. 047701 ◽  
Author(s):  
Wang Wei ◽  
Wang Xiao-Juan ◽  
Zhu Jun ◽  
Mao Xiang-Yu ◽  
Chen Xiao-Bing

RSC Advances ◽  
2018 ◽  
Vol 8 (37) ◽  
pp. 20990-20995 ◽  
Author(s):  
Xiang Yang ◽  
Shu Jiang ◽  
Jun Li ◽  
Jian-Hua Zhang ◽  
Xi-Feng Li

In this paper, W-doped ZnSnO (WZTO) thin films and TFT devices are successfully fabricated by a wet-solution technique.


2017 ◽  
Vol 5 (42) ◽  
pp. 22224-22233 ◽  
Author(s):  
Takuya Harada ◽  
T. Alan Hatton

A lithium-borate oxide, Li3BO3, is proposed as a next generation high capacity CO2 adsorbent operative over the intermediate temperature range of 500 to 650 °C.


Author(s):  
Irmak Karaduman Er ◽  
Ali Orkun Çağırtekin ◽  
Ahmad Ajjaq ◽  
Memet Ali Yıldırım ◽  
Aytunç Ateş ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document