scholarly journals Potential of Soil Stabilization Using Ground Granulated Blast Furnace Slag (GGBFS) and Fly Ash via Geopolymerization Method: A Review

Materials ◽  
2022 ◽  
Vol 15 (1) ◽  
pp. 375
Author(s):  
Syafiadi Rizki Abdila ◽  
Mohd Mustafa Al Bakri Abdullah ◽  
Romisuhani Ahmad ◽  
Dumitru Doru Burduhos Nergis ◽  
Shayfull Zamree Abd Rahim ◽  
...  
Keyword(s):  
Blast Furnace ◽  
Fly Ash ◽  
Blast Furnace Slag ◽  
Soil Stabilization ◽  
Road Construction ◽  
Granulated Blast Furnace Slag ◽  
Stabilized Soil ◽  
Ucs Test ◽  
Alkali Activated Binders ◽  
Furnace Slag

Geopolymers, or also known as alkali-activated binders, have recently emerged as a viable alternative to conventional binders (cement) for soil stabilization. Geopolymers employ alkaline activation of industrial waste to create cementitious products inside treated soils, increasing the clayey soils’ mechanical and physical qualities. This paper aims to review the utilization of fly ash and ground granulated blast furnace slag (GGBFS)-based geopolymers for soil stabilization by enhancing strength. Previous research only used one type of precursor: fly ash or GGBFS, but the strength value obtained did not meet the ASTM D 4609 (<0.8 Mpa) standard required for soil-stabilizing criteria of road construction applications. This current research focused on the combination of two types of precursors, which are fly ash and GGBFS. The findings of an unconfined compressive strength (UCS) test on stabilized soil samples were discussed. Finally, the paper concludes that GGBFS and fly-ash-based geo-polymers for soil stabilization techniques can be successfully used as a binder for soil stabilization. However, additional research is required to meet the requirement of ASTM D 4609 standard in road construction applications, particularly in subgrade layers.

Study on Soil Stabilization by Using Fly Ash and Ground Granulated Blast Furnace Slag (GGBS)

2021 ◽  
Vol 9 (8) ◽  
pp. 2506-2512
Author(s):  
Pratiksha R. Patil
Keyword(s):  
Blast Furnace ◽  
Fly Ash ◽  
Blast Furnace Slag ◽  
Soil Stabilization ◽  
Engineering Properties ◽  
Black Cotton Soil ◽  
Soil Test ◽  
Granulated Blast Furnace Slag ◽  
Strength And Durability ◽  
Furnace Slag

Abstract: Soil stabilization has become the more issue in construction activity. In this study we focus on improvement of soil by using Fly ash and ground granulated blast furnace slag (GGBS). In many villages there was demolition of houses due to flood situation and landslide so stabilization of soil is very important factor in this area. In these studies we use local Fly ash and Ground granulated blast furnace slag (GGBS) for stabilization of soil. Soil are generally stabilized to increase their strength and durability or to prevent soil erosion. The properties of soil vary a great deal at different places or in certain cases even at one place the success of soil stabilization depends on soil testing. Various methods are there to stabilize soil and the method should be verified in the lab with the soil material before applying it on the field. The various percentages of Fly ash and GGBS were mixed with soil sample to conduct soil test. Using fly ash reduces the plasticity index which has potential impact on engineering properties also GGBS has cementations property which acts as binding material for the soil. On addition of 15% Fly ash and 5% GGBS increase the strength of soil (according to IS2720:1985) it’s recommended for better result. Keywords: Stabilization of soil, Fly ash, GGBS, Black cotton soil, Soil test.

scholarly journals Optimizing Precursors and Reagents for the Development of Alkali-Activated Binders in Ambient Curing Conditions

2021 ◽  
Vol 5 (2) ◽  
pp. 59
Author(s):  
Dhruv Sood ◽  
Khandaker M. Anwar Hossain
Keyword(s):  
Blast Furnace ◽  
Fly Ash ◽  
Blast Furnace Slag ◽  
Curing Conditions ◽  
Granulated Blast Furnace Slag ◽  
Hardened State ◽  
Alkali Activated Binders ◽  
Furnace Slag ◽  
Alkali Activated ◽  
Ambient Curing

Alkali-activated binders (AABs) are developed through the activation of aluminosilicate-rich materials using alkaline reagents. The characteristics of AABs developed using a novel dry-mixing technique incorporating powder-based reagents/activators are extensively explored. A total of forty-four binder mixes are assessed in terms of their fresh and hardened state properties. The influence of mono/binary/ternary combinations of supplementary cementitious materials (SCMs)/precursors and different types/combinations/dosages of powder-based reagents on the strength and workability properties of different binder mixes are assessed to determine the optimum composition of precursors and the reagents. The binary (55% fly ash class C and 45% ground granulated blast furnace slag) and ternary (25% fly ash class C, 35% fly ash class F and 40% ground granulated blast furnace slag) binders with reagent-2 (calcium hydroxide and sodium sulfate = 2.5:1) exhibited desired workability and 28-day compressive strengths of 56 and 52 MPa, respectively. Microstructural analyses (in terms of SEM/EDS and XRD) revealed the formation of additional calcium aluminosilicate hydrate with sodium or mixed Ca/Na compounds in binary and ternary binders incorporating reagent-2, resulting in higher compressive strength. This research confirms the potential of producing powder-based cement-free green AABs incorporating binary/ternary combinations of SCMs having the desired fresh and hardened state properties under ambient curing conditions.

scholarly journals Effect of Mineral Admixtures on the Performance of Low-Quality Recycled Aggregate Concrete

Crystals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 596
Author(s):  
Yasuhiro Dosho
Keyword(s):  
Blast Furnace ◽  
Fly Ash ◽  
Blast Furnace Slag ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Mineral Admixtures ◽  
Structural Concrete ◽  
Aggregate Concrete ◽  
Granulated Blast Furnace Slag ◽  
Furnace Slag

To improve the application of low-quality aggregates in structural concrete, this study investigated the effect of multi-purpose mineral admixtures, such as fly ash and ground granulated blast-furnace slag, on the performance of concrete. Accordingly, the primary performance of low-quality recycled aggregate concrete could be improved by varying the replacement ratio of the recycled aggregate and using appropriate mineral admixtures such as fly ash and ground granulated blast-furnace slag. The results show the potential for the use of low-quality aggregate in structural concrete.

Study on Sulfate Resistance of Concrete with Compound Mineral Admixture

2011 ◽  
Vol 99-100 ◽  
pp. 420-425 ◽  
Author(s):  
Qian Rong Yang ◽  
Xiao Qian Wang ◽  
Hui Ji
Keyword(s):  
Blast Furnace ◽  
Fly Ash ◽  
Blast Furnace Slag ◽  
Steel Slag ◽  
Sulfate Attack ◽  
Mineral Admixture ◽  
Sulfate Resistance ◽  
Chemical Attack ◽  
Granulated Blast Furnace Slag ◽  
Furnace Slag

The strength, expansion and amount of scaling of concrete with compound mineral admixture (CMA) from steel slag, granulated blast furnace slag and fly ash were studied. The result shows that damage by crystallization press from sulfate attack when concrete was exposed to sulfate environments under wetting–drying alternation is much larger than that from sulfate chemical attack. Adding CMA to concrete could reduce the damage from expansion of concrete caused by sulfate chemical attack, but the resistance of concrete to damage by crystallization press from sulfate attack was remarkably reduced.

Sign in / Sign up

Export Citation Format

Share Document