scholarly journals Development of a Quantitative Model for the Analysis of the Functioning of Integrated TextileSupply Chains

Mathematics ◽  
2019 ◽  
Vol 7 (10) ◽  
pp. 929 ◽  
Author(s):  
Hua ◽  
Memon ◽  
Shah ◽  
Shakhrukh
Keyword(s):  
Mathematical Model ◽  
Supply Chain ◽  
Supply Chains ◽  
Cost Reduction ◽  
Quantitative Model ◽  
Transport Processes ◽  
Integrated Supply Chain ◽  
The Mathematical Model ◽  
Textile Products

The article is devoted to the development of a mathematical model for the analysis of functioning interferonogenic supply chain of textile products. A mathematical model and method of analysis of the functioning of an integrated supply chain of textile products are proposed. A mathematical model contributing to cost reduction in the supply chain of textile products is recommended. The results show that the mathematical model of optimization of placement textile enterprises promotes the decrease of the expenses in the supply chain. The designated model will not only be helpful for managers and enterprises related to textiles, but also for other fields dealing with logistics and supply chains in planning and organization of transport processes.

Optimization Control of the Bullwhip Effect in Supply Chain Inventory

2014 ◽  
Vol 945-949 ◽  
pp. 3187-3190
Author(s):  
Hai Dong ◽  
Jin Hua Liu ◽  
Liang Yu Liu
Keyword(s):  
Mathematical Model ◽  
Supply Chain ◽  
Control Theory ◽  
Inventory Control ◽  
Pid Controller ◽  
Bullwhip Effect ◽  
Control Gain ◽  
Optimization Control ◽  
Suitable Combination ◽  
The Mathematical Model

The bullwhip effect was caused by fuzzy demand among the enterprises. In order to reduce this effect, control theory was applied to solve the inventory in supply chain. Firstly, inventory control in supply chain and the bullwhip effect was researched. Secondly, a kind of proportional integral differential (PID) controller was developed for inventory control in a three-level supply chain, and the mathematical model of the PID controller for inventory control was presented. Finally, the results show that the PID controller can evidently alleviate the bullwhip effect and inventory fluctuations under the suitable combination of control gain.

scholarly journals Mathematical model of the integrated supply chain

2019 ◽  
Vol 15 (3) ◽  
pp. 353-361
Author(s):  
Vladimir M. Bure ◽  
◽  
Vladimir V. Karelin ◽  
Lyudmila N. Polyakova ◽  
Aleksander V. Flegontov ◽  
...  
Keyword(s):  
Mathematical Model ◽  
Supply Chain ◽  
Integrated Supply Chain

Concept and Practices of Cyber Supply Chain in Manufacturing Context

2019 ◽  
pp. 942-955
Author(s):  
Anisha Banu Dawood Gani ◽  
Yudi Fernando
Keyword(s):  
Risk Management ◽  
Supply Chain ◽  
Supply Chains ◽  
Manufacturing Industry ◽  
Supply Chain Network ◽  
Security Measures ◽  
Cyber Threats ◽  
Management Processes ◽  
Integrated Supply Chain

The objective of this chapter is to discuss the concept and practices of cyber supply chains (CSC) in the manufacturing context. Technological advancements are drastically transforming the manufacturing industry, which in turn drives the need for a digitally integrated supply chain. While CSC has its share of benefits, it is also vulnerable to cyber threats. In order to mitigate the risks, comprehensive security measures must be undertaken in the areas of technology, organization, governance, and culture, and they must be integrated into the company's established risk management processes. To ensure a resilient CSC, all members of the supply chain network must play a role to protect their respective systems from potential breach.

Evaluating the Modern Airlines Maintenance Parts Supply Chain Reliability and Effectiveness

2018 ◽  
Vol 3 (03) ◽  
Author(s):  
Surya Lokesh Bhargav Pentakota ◽  
Pranusha Chalasani ◽  
Sai Krishna Mekala ◽  
Samuel I Okate
Keyword(s):  
Sensitivity Analysis ◽  
Supply Chain ◽  
Supply Chains ◽  
Inventory Control ◽  
Analytical Model ◽  
Cost Reduction ◽  
Contextual Analysis ◽  
Rfid System ◽  
Support Organizations ◽  
The Cost

The estimation of RFID in the support of supply chains of aircraft parts is of growing interest and is analyzed, especially in the proposed analytical model of this paper. This model helps us pick up a superior comprehension of the connections between different expenses brought about and the RFID impact on an aircraft support following procedure. Utilizing a RFID system, the company specialized in aircraft parts can accumulate savings. For this we need to consider that technology can remove inaccuracy in inventory delays brought about by mishandling in the component repair. This contextual analysis represents wonder through the utilization of numerical suppositions, highlighting the advantages of RFID. Furthermore, the estimation of RFID in aircraft maintenance is assessed utilizing sensitivity analysis, as per the parameters of the model of expense decreases in misusing repair parts and inventory control. The discoveries support the industry acceptance of RFID innovation, demonstrating that this is beneficial to support organizations of aircraft parts. Finally, in this paper we are considering the mishandling of the damaged parts of the air craft and also the cost reduction and the mishandling of the inventory parts. A sensitivity analysis is also carried out for the parameters that are used for the decrease in the utilizing the parts, cost reduction and the inventory control.

Evaluating the Modern Airlines Maintenance Parts Supply Chain Reliability and Effectiveness

2018 ◽  
Vol 1 (01) ◽  
Author(s):  
Surya Lokesh Bhargav Pentakota ◽  
Pranusha Chalasani ◽  
Sai Krishna Mekala ◽  
Samuel I Okate
Keyword(s):  
Sensitivity Analysis ◽  
Supply Chain ◽  
Supply Chains ◽  
Inventory Control ◽  
Analytical Model ◽  
Cost Reduction ◽  
Contextual Analysis ◽  
Rfid System ◽  
Support Organizations ◽  
The Cost

The estimation of RFID in the support of supply chains of aircraft parts is of growing interest and is analyzed, especially in the proposed analytical model of this paper. This model helps us pick up a superior comprehension of the connections between different expenses brought about and the RFID impact on an aircraft support following procedure. Utilizing a RFID system, the company specialized in aircraft parts can accumulate savings. For this we need to consider that technology can remove inaccuracy in inventory delays brought about by mishandling in the component repair. This contextual analysis represents wonder through the utilization of numerical suppositions, highlighting the advantages of RFID. Furthermore, the estimation of RFID in aircraft maintenance is assessed utilizing sensitivity analysis, as per the parameters of the model of expense decreases in misusing repair parts and inventory control. The discoveries support the industry acceptance of RFID innovation, demonstrating that this is beneficial to support organizations of aircraft parts. Finally, in this paper we are considering the mishandling of the damaged parts of the air craft and also the cost reduction and the mishandling of the inventory parts. A sensitivity analysis is also carried out for the parameters that are used for the decrease in the utilizing the parts, cost reduction and the inventory control.

Evaluating the Modern Airlines Maintenance Parts Supply Chain Reliability and Effectiveness

2018 ◽  
Vol 2 (06) ◽  
Author(s):  
Surya Lokesh Bhargav Pentakota ◽  
Pranusha Chalasani ◽  
Sai Krishna Mekala ◽  
Samuel I Okate
Keyword(s):  
Sensitivity Analysis ◽  
Supply Chain ◽  
Supply Chains ◽  
Inventory Control ◽  
Analytical Model ◽  
Cost Reduction ◽  
Contextual Analysis ◽  
Rfid System ◽  
Support Organizations ◽  
The Cost

The estimation of RFID in the support of supply chains of aircraft parts is of growing interest and is analyzed, especially in the proposed analytical model of this paper. This model helps us pick up a superior comprehension of the connections between different expenses brought about and the RFID impact on an aircraft support following procedure. Utilizing a RFID system, the company specialized in aircraft parts can accumulate savings. For this we need to consider that technology can remove inaccuracy in inventory delays brought about by mishandling in the component repair. This contextual analysis represents wonder through the utilization of numerical suppositions, highlighting the advantages of RFID. Furthermore, the estimation of RFID in aircraft maintenance is assessed utilizing sensitivity analysis, as per the parameters of the model of expense decreases in misusing repair parts and inventory control. The discoveries support the industry acceptance of RFID innovation, demonstrating that this is beneficial to support organizations of aircraft parts. Finally, in this paper we are considering the mishandling of the damaged parts of the air craft and also the cost reduction and the mishandling of the inventory parts. A sensitivity analysis is also carried out for the parameters that are used for the decrease in the utilizing the parts, cost reduction and the inventory control.

Evaluating the Modern Airlines Maintenance Parts Supply Chain Reliability and Effectiveness

2018 ◽  
Vol 3 (07) ◽  
Author(s):  
Surya Lokesh Bhargav Pentakota ◽  
Pranusha Chalasani ◽  
Sai Krishna Mekala ◽  
Samuel I Okate
Keyword(s):  
Sensitivity Analysis ◽  
Supply Chain ◽  
Supply Chains ◽  
Inventory Control ◽  
Analytical Model ◽  
Cost Reduction ◽  
Contextual Analysis ◽  
Rfid System ◽  
Support Organizations ◽  
The Cost

The estimation of RFID in the support of supply chains of aircraft parts is of growing interest and is analyzed, especially in the proposed analytical model of this paper. This model helps us pick up a superior comprehension of the connections between different expenses brought about and the RFID impact on an aircraft support following procedure. Utilizing a RFID system, the company specialized in aircraft parts can accumulate savings. For this we need to consider that technology can remove inaccuracy in inventory delays brought about by mishandling in the component repair. This contextual analysis represents wonder through the utilization of numerical suppositions, highlighting the advantages of RFID. Furthermore, the estimation of RFID in aircraft maintenance is assessed utilizing sensitivity analysis, as per the parameters of the model of expense decreases in misusing repair parts and inventory control. The discoveries support the industry acceptance of RFID innovation, demonstrating that this is beneficial to support organizations of aircraft parts. Finally, in this paper we are considering the mishandling of the damaged parts of the air craft and also the cost reduction and the mishandling of the inventory parts. A sensitivity analysis is also carried out for the parameters that are used for the decrease in the utilizing the parts, cost reduction and the inventory control.

A neoteric approach to geometric shipment policy in an integrated supply chain with setup cost reduction and freight cost using service level constraint

2020 ◽  
Vol 54 (3) ◽  
pp. 653-673
Author(s):  
Selvaraj Hemapriya ◽  
Ramasamy Uthayakumar
Keyword(s):  
Supply Chain ◽  
Cost Reduction ◽  
Transportation Cost ◽  
Service Level ◽  
Setup Cost ◽  
Transportation Modes ◽  
Controllable Lead Time ◽  
Integrated Supply Chain ◽  
The Impact ◽  
Setup Cost Reduction

This paper explores a neoteric approach to geometric shipment policy and concerns the impact of controllable lead time, setup cost reduction, lost sales caused by stock-out and freight cost within an integrated vendor–buyer supply chain configuration using service-level constraint. In particular, the transportation cost is a function of shipping weight, distance and transportation modes. In other words, truckload (TL) and less-than-truckload (LTL) shipments. A heuristic model is developed to minimize the joint expected total cost (JETC), when the mode of transportation is limited to TL and LTL shipments. Numerical examples including the sensitivity analysis with some managerial insights of system parameters is implemented to endorse the outcome of the supply chain models.

scholarly journals Integration model of collaborative supply chain

DYNA ◽  
2015 ◽  
Vol 82 (193) ◽  
pp. 145-154 ◽  
Author(s):  
Horacio Bautista Santos ◽  
José Luis Martínez Flores ◽  
Gregorio Fernández Lambert ◽  
María Beatriz Bernabé Loranca ◽  
Fabiola Sánchez Galván ◽  
...  
Keyword(s):  
Mathematical Model ◽  
Fuzzy Logic ◽  
Supply Chain ◽  
Customer Service ◽  
Measurement Instrument ◽  
Integration Model ◽  
Integrated Supply Chain

The strategic members of collaborative supply chain have been looking for actions to synchronize their links. The purpose is to improve the customer service and fulfill the challenges of the globalized competitiveness. This trend is known as integrated supply chain and improves the companies performance as a whole. In this paper, an integration model of collaborative supply chain was developed considering the strategical, tactical and operational perspectives. To implement it, a measurement instrument was designed and validated statistically. Also a mathematical model using fuzzy logic was designed and applied among 36 small, medium and large Mexican companies to determine their integration level and propose specific actions that allow them to improve it.

Sign in / Sign up

Export Citation Format

Share Document