scholarly journals Robust Sensorless Model-Predictive Torque Flux Control for High-Performance Induction Motor Drives

Mathematics ◽  
2021 ◽  
Vol 9 (4) ◽  
pp. 403
Author(s):  
Ahmed G. Mahmoud A. Aziz ◽  
Hegazy Rez ◽  
Ahmed A. Zaki Diab
Keyword(s):  
Induction Motor ◽  
High Performance ◽  
Core Loss ◽  
Parameters Estimation ◽  
Torque Control ◽  
Flux Control ◽  
Control Approach ◽  
Light Load ◽  
Wide Range ◽  
Lyapunov’S Theorem

This paper introduces a novel sensorless model-predictive torque-flux control (MPTFC) for two-level inverter-fed induction motor (IM) drives to overcome the high torque ripples issue, which is evidently presented in model-predictive torque control (MPTC). The suggested control approach will be based on a novel modification for the adaptive full-order-observer (AFOO). Moreover, the motor is modeled considering core losses and a compensation term of core loss applied to the suggested observer. In order to mitigate the machine losses, particularly at low speed and light load operations, the loss minimization criterion (LMC) is suggested. A comprehensive comparative analysis between the performance of IM drive under conventional MPTC, and those of the proposed MPTFC approaches (without and with consideration of the LMC) has been carried out to confirm the efficiency of the proposed MPTFC drive. Based on MATLAB® and Simulink® from MathWorks® (2018a, Natick, MA 01760-2098 USA) simulation results, the suggested sensorless system can operate at very low speeds and has the better dynamic and steady-state performance. Moreover, a comparison in detail of MPTC and the proposed MPTFC techniques regarding torque, current, and fluxes ripples is performed. The stability of the modified adaptive closed-loop observer for speed, flux and parameters estimation methodology is proven for a wide range of speeds via Lyapunov’s theorem.

scholarly journals A Novel Vector Control Strategy for a Six-Phase Induction Motor with Low Torque Ripples and Harmonic Currents

Energies ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 1102 ◽  
Author(s):  
Hamidreza Heidari ◽  
Anton Rassõlkin ◽  
Toomas Vaimann ◽  
Ants Kallaste ◽  
Asghar Taheri ◽  
...  
Keyword(s):  
Vector Control ◽  
Induction Motor ◽  
Control Strategy ◽  
High Performance ◽  
Direct Torque Control ◽  
Low Frequency ◽  
Torque Control ◽  
Harmonic Currents ◽  
Torque Ripples ◽  
Vector Control Strategy

In this paper, a new vector control strategy is proposed to reduce torque ripples and harmonic currents represented in switching table-based direct torque control (ST-DTC) of a six-phase induction motor (6PIM). For this purpose, a new set of inputs is provided for the switching table (ST). These inputs are based on the decoupled current components in the synchronous reference frame. Indeed, using both field-oriented control (FOC) and direct torque control (DTC) concepts, precise inputs are applied to the ST in order to achieve better steady-state torque response. By applying the duty cycle control strategy, the loss subspace components are eliminated through a suitable selection of virtual voltage vectors. Each virtual voltage vector is based on a combination of a large and a medium vector to make the average volt-seconds in loss subspace near to zero. Therefore, the proposed strategy not only notably reduces the torque ripples, but also suppresses the low frequency current harmonics, simultaneously. Simulation and experimental results clarify the high performance of the proposed scheme.

Constant Switching Frequency and Torque Ripple Minimization of DTC of Induction Motor Drives with Three-level NPC Inverter

2017 ◽  
Vol 8 (3) ◽  
pp. 1035
Author(s):  
Huzainirah Ismail ◽  
Fazlli Patkar ◽  
Auzani Jidin ◽  
Aiman Zakwan Jidin ◽  
Noor Azida Noor Azlan ◽  
...  
Keyword(s):  
Induction Motor ◽  
High Performance ◽  
Direct Torque Control ◽  
Torque Ripple ◽  
Motor Drives ◽  
Torque Control ◽  
Switching Frequency ◽  
Ac Motor ◽  
Hysteresis Controller ◽  
Selection Of

<p>Direct Torque Control (DTC) is widely applied for ac motor drives as it offers high performance torque control with a simple control strategy. However, conventional DTC poses some disadvantages especially in term of variable switching frequency and large torque ripple due to the utilization of torque hysteresis controller. Other than that, performance of conventional DTC fed by two-level inverter is also restricted by the limited numbers of voltage vectors which lead to inappropriate selection of voltage vectors for different speed operations. This research aims to propose a Constant Switching Frequency (CSF) torque controller for DTC of induction motor (IM) fed by three-level Neutral-Point Clamped (NPC) inverter. The proposed torque controller utilizes PI controller which apply different gain for different speed operation. Besides, the utilization of NPC inverter provides greater number of voltage vectors which allow appropriate selection of voltage vectors for different operating condition. Using the proposed method, the improvement of DTC drives in term of producing a constant switching operation and minimizing torque ripple are achieved and validated via experimental results.</p>

scholarly journals Deadbeat-Based Model Predictive Voltage Control for a Sensorless Five-Phase Induction Motor Drive

2020 ◽  
Vol 2020 ◽  
pp. 1-30
Author(s):  
Mahmoud A. Mossa ◽  
Nguyen Vu Quynh ◽  
Hamdi Echeikh ◽  
Ton Duc Do
Keyword(s):  
Induction Motor ◽  
Direct Torque Control ◽  
Voltage Control ◽  
Torque Control ◽  
Computational Time ◽  
Motor Drive ◽  
Induction Motor Drive ◽  
Wide Range ◽  
Direct Model ◽  
Rotor Flux

This paper introduces a direct model predictive voltage control (DMP VC) for a sensorless five-phase induction motor drive. The operation of the proposed sensorless DMP VC is based on the direct control of the applied stator voltages instead of controlling the torque and flux as in model predictive direct torque control (MP DTC). Thus, the simplicity of the control system is enhanced, which saves the computational time and reduces the commutation losses as well. The methodology based on which the proposed sensorless DMP VC performs its operation depends on minimizing a cost function that calculates the error between the reference and actual values of the direct and quadrature (d-q) axes components of stator voltages. The reference values of d-q components of stator voltages are obtained through incorporating the deadbeat control within the proposed model predictive system. A robust back-stepping observer is proposed for estimating the speed, stator currents, rotor flux, and rotor resistance. The validity of the proposed sensorless DMP VC is confirmed through performing detailed and extensive comparisons between the proposed DMP VC and MP DTC approach. The obtained results state that the drive is exhibiting better performance under the proposed DMP VC with less ripples content and reduced computational burden. Moreover, the proposed back-stepping observer has confirmed its effectiveness in estimating the speed and other variables for a wide range of speed operation.

scholarly journals Real-Time Low-Cost Speed Monitoring and Control of Three-Phase Induction Motor via a Voltage/Frequency Control Approach

2020 ◽  
Vol 2020 ◽  
pp. 1-14
Author(s):  
Ali Hmidet ◽  
Olfa Boubaker
Keyword(s):  
Real Time ◽  
Induction Motor ◽  
Closed Loop ◽  
Low Cost ◽  
Closed Loop Control ◽  
Loop Control ◽  
Control Approach ◽  
Three Phase ◽  
Wide Range ◽  
Voltage Frequency

In this paper, a new design of a real-time low-cost speed monitoring and closed-loop control of the three-phase induction motor (IM) is proposed. The proposed solution is based on a voltage/frequency (V/F) control approach and a PI antiwindup regulator. It uses the Waijung Blockset which considerably alleviates the heaviness and the difficulty of the microcontroller’s programming task incessantly crucial for the implementation and the management of such complex applications. Indeed, it automatically generates C codes for many types of microcontrollers like the STM32F4 family, also used in this application. Furthermore, it offers a cost-effective design reducing the system components and increasing its efficiency. To prove the efficiency of the suggested design, not only simulation results are carried out for a wide range of variations in load and reference speed but also experimental assessment. The real-time closed-loop control performances are proved using the aMG SQLite Data Server via the UART port board, whereas Waijung WebPage Designer (W2D) is used for the web monitoring task. Experimental results prove the accuracy and robustness of the proposed solution.

Sign in / Sign up

Export Citation Format

Share Document