scholarly journals Stability and Solid Solutions of Hydrous Alumino-Silicates in the Earth’s Mantle

Minerals ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 330
Author(s):  
Wendy R. Panero ◽  
Razvan Caracas
Keyword(s):  
Solid Solutions ◽  
Lower Mantle ◽  
Density Functional ◽  
Bulk Composition ◽  
Site Occupancy ◽  
Configurational Entropy ◽  
Density Functional Theory Calculations ◽  
Earth’S Mantle ◽  
Stability Structure ◽  
The Stability

The degree to which the Earth’s mantle stores and cycles water in excess of the storage capacity of nominally anhydrous minerals is dependent upon the stability of hydrous phases under mantle-relevant pressures, temperatures, and compositions. Two hydrous phases, phase D and phase H, are stable to the pressures and temperatures of the Earth’s lower mantle, suggesting that the Earth’s lower mantle may participate in the cycling of water. We build on our prior work of density functional theory calculations on phase H with the stability, structure, and bonding of hydrous phases D, and we predict the aluminum partitioning with H in the Al 2 O 3 -SiO 2 -MgO-H 2 O system. We address the solid solutions through a statistical sampling of site occupancy and calculation of the partition function from the grand canonical ensemble. We show that each phase has a wide solid solution series between MgSi 2 O 6 H 2 -Al 2 SiO 6 H 2 and MgSiO 4 H 2 -2 δ AlOOH + SiO 2 , in which phase H is more aluminum rich than phase D at a given bulk composition. We predict that the addition of Al to both phases D and H stabilizes each phase to higher temperatures through additional configurational entropy. While we have shown that phase H does not exhibit symmetric hydrogen bonding at high pressure, we report here that phase D undergoes a gradual increase in the number of symmetric H-bonds beginning at ∼30 GPa, and it is only ∼50% complete at 60 GPa.

First principles investigation on how site preference and entropy affect the stability of (EuxM1–x)2Ge2Pb (M = Ca, Sr, Ba) polar intermetallics

2016 ◽  
Vol 94 (4) ◽  
pp. 312-320 ◽  
Author(s):  
Tyson Terpstra ◽  
James Hooper ◽  
Eva Zurek
Keyword(s):  
Density Functional ◽  
Composition Range ◽  
Configurational Entropy ◽  
Density Functional Theory Calculations ◽  
Site Preference ◽  
Free Energies ◽  
Functional Theory ◽  
Wide Composition Range ◽  
The Stability ◽  
Realistic Structure

Density functional theory calculations have been carried out to analyze the factors contributing to the stabilities of a set of recently synthesized quaternary polar intermetallic compounds, (EuxM1–x)2Ge2Pb with M = Ca, Sr, and Ba. Experiments showed that these preferentially crystallized with Pbam (M = Ca) or Cmmm (M = Sr, Ba) symmetry. We systematically explored how the electronic energies of these structures depended on how they were “colored” by the europium/M ions for a wide composition range. It was found that whereas there was very little site preference in the Cmmm structure, the “B” site in the Pbam structure strongly preferred smaller cations. The configurational entropy was also found to play a role in determining which structures might be preferred. However, the experimentally obtained product ratios could only be fully rationalized by the Gibbs free energies of structures containing M:Eu ratios resembling those that were synthesized experimentally. Our results highlight the importance of calculating vibrational contributions to the entropy for realistic structure models (in terms of coloring and composition) to explain product ratios for syntheses carried out at high temperatures.

Targeting complex plutonium oxides by combining crystal chemical reasoning with density-functional theory calculations: the quaternary plutonium oxide Cs2PuSi6O15

2020 ◽  
Vol 56 (66) ◽  
pp. 9501-9504
Author(s):  
Kristen A. Pace ◽  
Vladislav V. Klepov ◽  
Matthew S. Christian ◽  
Gregory Morrison ◽  
Travis K. Deason ◽  
...  
Keyword(s):  
Density Functional Theory ◽  
Crystal Growth ◽  
Dft Calculations ◽  
Density Functional ◽  
Density Functional Theory Calculations ◽  
Crystal Chemical ◽  
The Novel ◽  
Functional Theory ◽  
The Stability ◽  
Chemical Reasoning

The stability of the novel Pu(iv) silicate, Cs2PuSi6O15, was predicted from a combination of crystal chemical reasoning and DFT calculations and confirmed by its synthesis via flux crystal growth.

scholarly journals Computational Modeling of Tensile Stress Effects on the Structure and Stability of Prototypical Covalent and Layered Materials

Nanomaterials ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 1483 ◽  
Author(s):  
Hocine Chorfi ◽  
Álvaro Lobato ◽  
Fahima Boudjada ◽  
Miguel A. Salvadó ◽  
Ruth Franco ◽  
...  
Keyword(s):  
Tensile Stress ◽  
Density Functional ◽  
Stability Limit ◽  
Density Functional Theory Calculations ◽  
Layered Materials ◽  
Stress Conditions ◽  
Ideal Strength ◽  
Critical Strength ◽  
Calculated Stress ◽  
The Stability

Understanding the stability limit of crystalline materials under variable tensile stress conditions is of capital interest for technological applications. In this study, we present results from first-principles density functional theory calculations that quantitatively account for the response of selected covalent and layered materials to general stress conditions. In particular, we have evaluated the ideal strength along the main crystallographic directions of 3C and 2H polytypes of SiC, hexagonal ABA stacking of graphite and 2H-MoS 2 . Transverse superimposed stress on the tensile stress was taken into account in order to evaluate how the critical strength is affected by these multi-load conditions. In general, increasing transverse stress from negative to positive values leads to the expected decreasing of the critical strength. Few exceptions found in the compressive stress region correlate with the trends in the density of bonds along the directions with the unexpected behavior. In addition, we propose a modified spinodal equation of state able to accurately describe the calculated stress–strain curves. This analytical function is of general use and can also be applied to experimental data anticipating critical strengths and strain values, and for providing information on the energy stored in tensile stress processes.

DFT STUDIES ON THE STABILITY OF THE TRANS AND CIS ISOMERS IN THE SQUARE PLANAR PALLADIUM(II) COMPLEXES Pd(I)(PPh3)(η3-XCHC(Ph)CHR) (X = CMe3, CO2Me, P(O)(OMe)2, AND SO2H; R = H, Me)

2008 ◽  
Vol 07 (04) ◽  
pp. 505-515
Author(s):  
LIQIN XUE ◽  
GUOCHEN JIA ◽  
ZHENYANG LIN
Keyword(s):  
Density Functional Theory ◽  
Electronic Properties ◽  
Relative Stability ◽  
Density Functional ◽  
Density Functional Theory Calculations ◽  
Dft Studies ◽  
Functional Theory ◽  
Square Planar ◽  
The Stability ◽  
Cis Isomer

The relative stability of the trans and cis isomers in the square planar palladium(II) complexes Pd ( I )( PPh 3)(η3- XCHC ( Ph ) CHR ) ( X = H , Me , CMe 3, CO 2 Me , P ( O )( OMe )2, and SO 2 H ; R = H , Me ) was investigated with the aid of the B3LYP density functional theory calculations. We examined how the substituents X, with different electronic properties, of the η3-allyl ligands affect the relative stability of the trans and cis isomers. Through the investigation, we were able to explain the trans/cis relative stability derived from the experimentally measured trans/cis isomer ratios in the palladium(II) complexes.

Exploring halide anion affinities to native cyclodextrins by mass spectrometry and molecular modelling

2017 ◽  
Vol 24 (3) ◽  
pp. 269-278 ◽  
Author(s):  
Chongsheng Xu ◽  
Nan He ◽  
Zhenhua Li ◽  
Yanqiu Chu ◽  
Chuan-Fan Ding
Keyword(s):  
Gas Phase ◽  
Density Functional ◽  
Binding Constants ◽  
Density Functional Theory Calculations ◽  
Collision Induced Dissociation ◽  
Binding Affinities ◽  
Cyclodextrin Complex ◽  
Halide Anion ◽  
Mass Frame ◽  
The Stability

The binding affinities of cyclodextrins complexation with chlorine (Cl−), bromine (Br−) and iodine (I−), were measured by mass spectrometric titrimetry, and the fitting of the binding constants was based on the concentration measurement of the cyclodextrin equilibrium. The binding constants (lg Ka) for α-, β- or γ-cyclodextrin with Cl− were 3.99, 4.03 and 4.11, respectively. The gas-phase binding affinity of halide anions for native cyclodextrins was probed by collision-induced dissociation. In collision-induced dissociation, the centre-of-mass frame energy results revealed that in the gas phase, for the same type of cyclodextrin, the stability of the complexes decreased in order: Cl > Br > I, and for the same halide anion, the binding stability of the complex with α-, β- or γ-cyclodextrin decreased in the order: γ-cyclodextrin >β-cyclodextrin > α-cyclodextrin. The density functional theory calculations showed that halide anion binding on the primary face had a lower energy than the secondary face and hydrogen bonding was the main driving force for complex formation. The higher stability of the γ-cyclodextrin complex with the Cl anion can be attributed to the higher charge density of the Cl anion and better flexibility of γ-cyclodextrin.

Stability, Electronic Properties, and Structural Isomerism in Small Copper Clusters

2012 ◽  
Vol 1479 ◽  
pp. 15-20
Author(s):  
Juan M. Montejano-Carrizales ◽  
Faustino Aguilera-Granja ◽  
Ricardo A. Guirado-López
Keyword(s):  
Electronic Properties ◽  
Density Functional ◽  
Three Dimensional ◽  
Density Functional Theory Calculations ◽  
Energy Barriers ◽  
Elastic Band ◽  
Experimental Conditions ◽  
Atomic Displacements ◽  
Structural Isomerism ◽  
The Stability

ABSTRACTWe present extensive pseudopotential density functional theory calculations dedicated to analyze the stability, electronic properties, and structural isomerism in Cu6 clusters. We consider structures of different symmetries and charge states. Our total energy calculations reveal a strong competition between two- and three-dimensional atomic arrays, the later being mostly energetically preferred for the anionic structures. The bond lengths and electronic spectra strongly depend on the local atomic environment, a result that is expected to strongly influence the catalytic activity of our clusters. Using the nudged elastic band method we analyze the interconversion processes between different Cu6 isomers. Complex atomic relaxations are obtained when we study the transition between different cluster structures; however relatively small energy barriers of approximately 0.3 eV accompany the atomic displacements. Interestingly, we obtain that by considering positively charged Cu6+ systems we reduce further the energy barriers opposing the interconversion process. The previous results could imply that, under a range of experimental conditions, it should be possible to observe different Cu6cluster structures in varying proportions.

Density Functional Theory Calculations of Properties of the Grain Boundaries in Aluminum

2011 ◽  
Vol 1297 ◽  
Author(s):  
Marek Muzyk ◽  
Krzysztof J. Kurzydlowski
Keyword(s):  
Density Functional Theory ◽  
Grain Boundaries ◽  
Density Functional ◽  
Quantitative Description ◽  
Aluminum Matrix ◽  
Density Functional Theory Calculations ◽  
Functional Theory ◽  
Nano Crystalline ◽  
The Density Functional Theory ◽  
The Stability

ABSTRACTThe Density Functional Theory has been used to analyze an inter-granular segregation of Cu and Mg. The stability of Cu and Mg atoms in the aluminum matrix, intermetallic phases and symmetric twist grain boundaries has been compared. The quantitative description of solubility of Cu and Mg atoms in the nano-crystalline aluminum has been proposed. The calculations have been carried out to investigate the properties of symmetric twist boundaries in aluminum with and without Cu/Mg atoms. The phenomena of are discussed and its effect on the stability of precipitates containing these elements.

scholarly journals How to Extract Adsorption Energies, Adsorbateadsorbate Interaction Parameters, and Saturation Coverages from Temperature Programmed Desorption Experiments

2021 ◽  
Author(s):  
Sudarshan Vijay ◽  
Henrik Høgh Kristoffersen ◽  
Yu Katayama ◽  
Yang Shao-Horn ◽  
Ib Chorkendorff ◽  
...  
Keyword(s):  
Adsorption Energy ◽  
Density Functional ◽  
Configurational Entropy ◽  
Density Functional Theory Calculations ◽  
Temperature Programmed Desorption ◽  
Functional Theory ◽  
Interaction Terms ◽  
Saturation Coverage ◽  
Adsorption Energies ◽  
Temperature Programmed

<p>We present a simple scheme to extract the adsorption energy, adsorbate interaction parameter and the saturation coverage from temperature programmed desorption (TPD) experiments. We propose that the coverage dependent adsorption energy can be fit using a functional form including the configurational entropy and linear adsorbate-adsorbate interaction terms. As one example of this scheme, we analyze TPD spectra of desorption on Au(211) and Au(310) surfaces. We determine that under atmospheric pressure, the <i>steps</i> of both facets adsorb between 0.4-0.9 ML coverage of CO*. We show this result to be consistent with density functional theory calculations of adsorption energies with the BEEF-vdW functional. <b></b></p>

scholarly journals Theoretical study of the phase transitions and electronic structure of (Zr0.5, Mg0.5)N and (Hf0.5, Mg0.5)N

2020 ◽  
Vol 56 (1) ◽  
pp. 305-312
Author(s):  
M. A. Gharavi ◽  
R. Armiento ◽  
B. Alling ◽  
P. Eklund
Keyword(s):  
Electronic Structure ◽  
Seebeck Coefficient ◽  
Thermoelectric Properties ◽  
Solid Solutions ◽  
Rock Salt ◽  
Density Functional ◽  
Configurational Entropy ◽  
Mean Field Approximation ◽  
Random Structure ◽  
High Seebeck Coefficient

Abstract Rock-salt scandium nitride has gained interest due to its thermoelectric properties including a relatively high Seebeck coefficient. This motivates research for other semiconductor materials that exhibit similar electronic structure features as ScN. Using density functional theory calculations, we have studied disordered solid solutions of (Zr0.5, Mg0.5)N and (Hf0.5, Mg0.5)N using the special quasi-random structure model. The results show that within a mean-field approximation for the configurational entropy, the order–disorder phase transformation between the monoclinic LiUN2 prototype structure and the rock-salt cubic random alloy of these mentioned solid solutions occur at 740 K and 1005 K for (Zr0.5, Mg0.5)N and (Hf0.5, Mg0.5)N, respectively. The density-of-states for the two ternary compounds is also calculated and predicts semiconducting behavior with band gaps of 0.75 eV for (Zr0.5, Mg0.5)N and 0.92 eV for (Hf0.5, Mg0.5)N. The thermoelectric properties of both compounds are also predicted. We find that in the range of a moderate change in the Fermi level, a high Seebeck coefficient value at room temperature can be achieved.

Sign in / Sign up

Export Citation Format

Share Document