scholarly journals Study of Double-Deck Vibrating Flip-Flow Screen Based on Dynamic Stiffness Characteristics of Shear Springs

Minerals ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 928
Author(s):  
Guofeng Zhao ◽  
Xinwen Wang ◽  
Dongdong Lin ◽  
Ningning Xu ◽  
Chi Yu ◽  
...  
Keyword(s):  
Degrees Of Freedom ◽  
Dynamic Stiffness ◽  
Frequency Characteristics ◽  
Spring Stiffness ◽  
Lower Shear ◽  
Screening Performance ◽  
Screening Efficiency ◽  
Stiffness Characteristics ◽  
Shear Spring ◽  
Three Degrees Of Freedom

Double-deck vibrating flip-flow screens have been widely used for the repurposing of decoration waste; however, the influence of shear spring stiffness on the screen’s vibration characteristics is under-researched. The shear spring stiffness affects the amplitude–frequency characteristics, phase–frequency characteristics, screening performance and processing capacity of the screen. In this paper, a mathematical model of the double-deck vibrating flip-flow screen is proposed based on a vibrating system with three degrees of freedom. Based on the experiments of the industrial screen, the amplitude–frequency and phase–frequency characteristics of the double-deck vibrating flip-flow screen were studied. Within the range of 25 to 75 rad/s, the amplitude of the main screen frame decreased gradually, the floating screen frames decreased at first and then increased and the amplitudes of the main and floating screen frames were dependent on the stiffness of the isolation springs and shear springs. When the frequency was 75 rad/s, the stiffness of the upper and lower shear springs was 11,440 kN/m, respectively, and the screening efficiency reached 97.09%.

Numerical Analysis for Galloping of Iced Quad Bundle Conductors

2012 ◽  
Vol 226-228 ◽  
pp. 30-34
Author(s):  
Jun Yan Cai ◽  
Xi Jun Liu ◽  
Su Xia Zhang
Keyword(s):  
Numerical Analysis ◽  
Degrees Of Freedom ◽  
Damping Ratio ◽  
Simplified Model ◽  
Fluid Density ◽  
Spring Stiffness ◽  
Critical Wind Velocity ◽  
Line Path ◽  
Stiffness And Damping ◽  
Three Degrees Of Freedom

In order to attain the purpose of anti-galloping, a simplified model for iced quad bundle conductors of three degrees of freedom in vertical, horizontal and torsional directions is established by means of the Hamilton principle, in which the effect of spacers stiffness and damping is considered. Based on the model, the influence of related parameters such as fluid density, damping ratio on conductor galloping amplitude and critical wind velocity is analyzed. Simultaneously, the relation curve between elastic property of spacers and conductor galloping is obtained. The results indicate that the conductor galloping can be weakened to some degree with the proper enlargement of damping ratio, the reasonable setting of spring stiffness on spacers and the avoidance of areas such as the wind outlet and windward as much as possible when choosing the line path and so on.

scholarly journals Load–Displacement Characterization in Three Degrees-of-Freedom for General Lamina Emergent Torsion Arrays

2020 ◽  
Vol 142 (9) ◽  
Author(s):  
Nathan A. Pehrson ◽  
Pietro Bilancia ◽  
Spencer Magleby ◽  
Larry Howell
Keyword(s):  
Degrees Of Freedom ◽  
Design Space ◽  
Element Analysis ◽  
Array Design ◽  
Elastic Load ◽  
In Series ◽  
Load Displacement ◽  
Stiffness Characteristics ◽  
Tunable Stiffness ◽  
Three Degrees Of Freedom

Abstract Lamina emergent torsion (LET) joints for use in origami-based applications enables folding of panels. Placing LET joints in series and parallel (formulating LET arrays) opens the design space to provide for tunable stiffness characteristics in other directions while maintaining the ability to fold. Analytical equations characterizing the elastic load–displacement for general serial–parallel formulations of LET arrays for three degrees-of-freedom are presented: rotation about the desired axis, in-plane rotation, and extension/compression. These equations enable the design of LET arrays for a variety of applications, including origami-based mechanisms. These general equations are verified using finite element analysis, and to show variability of the LET array design space, several verification plots over a range of parameters are provided.

scholarly journals Active Disturbance Rejection for a Three Degrees of Freedom Gyroscope

2018 ◽  
Vol 51 (13) ◽  
pp. 372-377 ◽  
Author(s):  
Juan E. Andrade García ◽  
Alejandra Ferreira de Loza ◽  
Luis T. Aguilar ◽  
Ramón I. Verdés
Keyword(s):  
Disturbance Rejection ◽  
Degrees Of Freedom ◽  
Active Disturbance Rejection ◽  
Three Degrees Of Freedom

scholarly journals Cyclic Deformation of Microcantilevers Using In-Situ Micromanipulation

2021 ◽  
Author(s):  
A. H. S. Iyer ◽  
M. H. Colliander
Keyword(s):  
Degrees Of Freedom ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Structural Components ◽  
Cyclic Testing ◽  
Phase Boundaries ◽  
Bulk Specimen ◽  
Arbitrary Position ◽  
Three Degrees Of Freedom

Abstract Background The trend in miniaturisation of structural components and continuous development of more advanced crystal plasticity models point towards the need for understanding cyclic properties of engineering materials at the microscale. Though the technology of focused ion beam milling enables the preparation of micron-sized samples for mechanical testing using nanoindenters, much of the focus has been on monotonic testing since the limited 1D motion of nanoindenters imposes restrictions on both sample preparation and cyclic testing. Objective/Methods In this work, we present an approach for cyclic microcantilever bending using a micromanipulator setup having three degrees of freedom, thereby offering more flexibility. Results The method has been demonstrated and validated by cyclic bending of Alloy 718plus microcantilevers prepared on a bulk specimen. The experiments reveal that this method is reliable and produces results that are comparable to a nanoindenter setup. Conclusions Due to the flexibility of the method, it offers straightforward testing of cantilevers manufactured at arbitrary position on bulk samples with fully reversed plastic deformation. Specific microstructural features, e.g., selected orientations, grain boundaries, phase boundaries etc., can therefore be easily targeted.

scholarly journals Galloping Stability and Wind Tunnel Test of Iced Quad Bundled Conductors considering Wake Effect

2020 ◽  
Vol 2020 ◽  
pp. 1-15
Author(s):  
Xiaohui Liu ◽  
Ming Zou ◽  
Chuan Wu ◽  
Mengqi Cai ◽  
Guangyun Min ◽  
...  
Keyword(s):  
Wind Tunnel ◽  
Transmission Lines ◽  
Degrees Of Freedom ◽  
Wind Tunnel Test ◽  
Aerodynamic Coefficients ◽  
Wake Effect ◽  
Aerodynamic Coefficient ◽  
Set Up ◽  
The Stability ◽  
Three Degrees Of Freedom

A new quad bundle conductor galloping model considering wake effect is proposed to solve the problem of different aerodynamic coefficients of each subconductor of iced quad bundle conductor. Based on the quasistatic theory, a new 3-DOF (three degrees of freedom) galloping model of iced quad bundle conductors is established, which can accurately reflect the energy transfer and galloping of quad bundle conductor in three directions. After a series of formula derivations, the conductor stability judgment formula is obtained. In the wind tunnel test, according to the actual engineering situation, different variables are set up to accurately simulate the galloping of iced quad bundle conductor under the wind, and the aerodynamic coefficient is obtained. Finally, according to the stability judgment formula of this paper, calculate the critical wind speed of conductor galloping through programming. The dates of wind tunnel test and calculation in this paper can be used in the antigalloping design of transmission lines.

Analysis and Optimization of a New Differentially Driven Cable Parallel Robot

2015 ◽  
Vol 7 (3) ◽  
Author(s):  
Hamed Khakpour ◽  
Lionel Birglen ◽  
Souheil-Antoine Tahan
Keyword(s):  
Kinematic Analysis ◽  
Design Methodology ◽  
Degrees Of Freedom ◽  
Parallel Robot ◽  
Cable Robot ◽  
Proper Design ◽  
Two Indices ◽  
Three Degrees Of Freedom ◽  
Cable Robots

In this paper, a new three degrees of freedom (DOF) differentially actuated cable parallel robot is proposed. This mechanism is driven by a prismatic actuator and three cable differentials. Through this design, the idea of using differentials in the structure of a spatial cable robot is investigated. Considering their particular properties, the kinematic analysis of the robot is presented. Then, two indices are defined to evaluate the workspaces of the robot. Using these indices, the robot is subsequently optimized. Finally, the performance of the optimized differentially driven robot is compared with fully actuated mechanisms. The results show that through a proper design methodology, the robot can have a larger workspace and better performance using differentials than the fully driven cable robots using the same number of actuators.

Sign in / Sign up

Export Citation Format

Share Document