scholarly journals Visible Light-Induced Homolytic Cleavage of Perfluoroalkyl Iodides Mediated by Phosphines

Molecules ◽  
2020 ◽  
Vol 25 (7) ◽  
pp. 1606 ◽  
Author(s):  
Mario Bracker ◽  
Lucas Helmecke ◽  
Martin Kleinschmidt ◽  
Constantin Czekelius ◽  
Christel M. Marian
Keyword(s):  
Visible Light ◽  
Density Functional ◽  
Experimental Studies ◽  
Lone Pair ◽  
Functional Theory ◽  
Computational Evaluation ◽  
Light Region ◽  
Condon Factors ◽  
Oxygen Lone Pair ◽  
Franck Condon

In an effort to explain the experimentally observed variation of the photocatalytic activity of t Bu 3 P, n Bu 3 P and (MeO) 3 P in the blue-light regime [Helmecke et al., Org. Lett. 21 (2019) 7823], we have explored the absorption characteristics of several phosphine– and phosphite–IC 4 F 9 adducts by means of relativistic density functional theory and multireference configuration interaction methods. Based on the results of these computational and complementary experimental studies, we offer an explanation for the broad tailing of the absorption of t Bu 3 P-IC 4 F 9 and (MeO) 3 P-IC 4 F 9 into the visible-light region. Larger coordinate displacements of the ground and excited singlet potential energy wells in n Bu 3 P-IC 4 F 9 , in particular with regard to the P–I–C bending angle, reduce the Franck–Condon factors and thus the absorption probability compared to t Bu 3 P-IC 4 F 9 . Spectroscopic and computational evaluation of conformationally flexible and locked phosphites suggests that the reactivity of (MeO) 3 P may be the result of oxygen lone-pair participation and concomitant broadening of absorption. The proposed mechanism for the phosphine-catalyzed homolytic C–I cleavage of perfluorobutane iodide involves S1 ← S0 absorption of the adduct followed by intersystem crossing to the photochemically active T 1 state.

(Cu, Ag)-DOPED ZnS WITH WIDE VISIBLE LIGHT RANGE ABSORPTION FOR WATER SPLITTING: A THEORETICAL AND EXPERIMENTAL STUDY

2019 ◽  
Vol 27 (04) ◽  
pp. 1950139
Author(s):  
XIAOBO CHEN ◽  
WEIWEI LIU ◽  
ZHIHAI ZHANG ◽  
WEN YANG ◽  
PEIZHI YANG
Keyword(s):  
Visible Light ◽  
Water Splitting ◽  
Density Functional ◽  
Energy Levels ◽  
Experimental Studies ◽  
Density Functional Theory Calculations ◽  
Chemical Precipitation ◽  
Precipitation Method ◽  
Functional Theory ◽  
Light Region

Photocatalytic water splitting using a semiconductor photocatalyst is a promising process for direct solar energy conversion. In this study, the feasibility of the photocatalytic H2 evolution on (Cu, Ag)- doped ZnS catalysts under visible light irradiation has been investigated by using first-principles density functional theory calculations and experimental studies. The present results reveal that (Cu, Ag)-doped ZnS structures have relatively small formation energy, implying that they are more easily obtained in experiment. Moreover, the absorption is enhanced obviously in the visible-light region for (Cu, Ag)-doped ZnS, but their energy levels are still suitable for water splitting to generate H2, which means that (Cu, Ag)-doped ZnS structures are promising candidate photocatalyst materials for H2 production driven by visible light. ZnS and (Cu, Ag)-doped ZnS were prepared using chemical precipitation method. (Cu, Ag)-doped ZnS samples showed an improved photocatalytic activity compared with undoped ZnS. Ag-doped ZnS (0.15 g L[Formula: see text] has the highest hydrogen evolution rate of 794.6 [Formula: see text]mol[Formula: see text] h[Formula: see text] [Formula: see text] g[Formula: see text] at pH 3 (0.1 M Na2S solution as a sacrificing agent).

scholarly journals High-Pressure Phases of SnO and PbO: A Density Functional Theory Combined with an Evolutionary Algorithm Approach

Materials ◽  
2021 ◽  
Vol 14 (21) ◽  
pp. 6552
Author(s):  
Long Truong Nguyen ◽  
Guy Makov
Keyword(s):  
Density Functional Theory ◽  
High Pressure ◽  
Evolutionary Algorithm ◽  
Density Functional ◽  
Experimental Studies ◽  
Lone Pair ◽  
Density Functional Theory Calculations ◽  
Functional Theory ◽  
Lead Monoxide ◽  
Tin Monoxide

Tin monoxide, SnO, and its analog, lead monoxide, PbO, have the same tetragonal P4/nmm structure, shaped by nonbonding dispersion forces and lone pairs. The high-pressure phases of SnO and PbO have been explored in several experimental and theoretical studies, with conflicting results. In this study, the high-pressure structures of SnO and PbO are investigated using density functional theory calculations combined with an evolutionary algorithm to identify novel high-pressure phases. We propose that the monoclinic P21/m SnO and orthorhombic Pmmn PbO phases, which are metastable at 0 GPa, are a slight rearrangement of the tetragonal P4/nmm-layered structure. These orthorhombic (and their closely related monoclinic) phases become more favored than the tetragonal phase upon compression. In particular, the transition pressures to the orthorhombic γ-phase Pmn21of SnO/PbO and the monoclinic phase P21/m of SnO are found to be consistent with experimental studies. Two new high-pressure SnO/PbO polymorphs are predicted: the orthorhombic Pbcm phase of SnO and the monoclinic C2/m of PbO. These phases are stabilized in our calculations when P > 65 GPa and P > 50 GPa, respectively. The weakening of the lone pair localization and elastic instability are the main drivers of pressure-induced phase transitions. Modulations of the SnO/PbO electronic structure due to structural transitions upon compression are also discussed.

scholarly journals Effect of Electronegativity and Charge Balance on the Visible-Light-Responsive Photocatalytic Activity of Nonmetal Doped Anatase TiO2

2012 ◽  
Vol 2012 ◽  
pp. 1-8 ◽  
Author(s):  
Jibao Lu ◽  
Hao Jin ◽  
Ying Dai ◽  
Kesong Yang ◽  
Baibiao Huang
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Density Functional ◽  
Experimental Studies ◽  
Density Functional Theory Calculations ◽  
Charge Balance ◽  
Functional Theory ◽  
Impurity States ◽  
Photocatalytic Activities ◽  
Visible Light Photocatalytic

The origin of visible light absorption and photocatalytic activity of nonmetal doped anatase TiO2were investigated in details in this work based on density functional theory calculations. Our results indicate that the electronegativity is of great significance in the band structures, which determines the relative positions of impurity states induced by the doping species, and further influences the optical absorption and photocatalytic activities of doped TiO2. The effect of charge balance on the electronic structure was also discussed, and it was found that the charge-balance structures may be more efficient for visible light photocatalytic activities. In addition, the edge positions of conduction band and valence band, which determine the ability of a semiconductor to transfer photoexcited electrons to species adsorbed on its surface, were predicted as well. The results may provide a reference to further experimental studies.

Variations in the structural, electronic and optical properties of N-doped TiO2 with increasing N doping concentration

2015 ◽  
Vol 29 (08) ◽  
pp. 1550022 ◽  
Author(s):  
Matiullah Khan ◽  
Sahar Ramin Gul ◽  
Jing Li ◽  
Wenbin Cao
Keyword(s):  
Visible Light ◽  
Band Gap ◽  
Density Functional ◽  
Doping Concentration ◽  
Density Functional Theory Calculations ◽  
Theoretical Background ◽  
Functional Theory ◽  
Visible Light Absorption ◽  
Light Region ◽  
N Doping

Based on density functional theory, calculations were performed for geometrically optimized N -doped TiO 2 models. The effect of N dopant and its increasing doping concentration on the band structure are elucidated. N doping narrowed the band gap of TiO 2 and introduced isolated N 2p states within the band gap. The location of N 2p states within the band gap can be optimized by N doping concentration. All N -doped TiO 2 models shifted the absorption edge of TiO 2 toward visible light region and increasing N doping concentration improved the visible light absorption. N -doped TiO 2 model having reduced band gap without any isolated states will improve the photocatalytic response. Our results provide strong theoretical background for existing experiments.

Molecular Investigations of the Newly Synthesized Azomethines as Antioxidants: Theoretical and Experimental Studies

2019 ◽  
Vol 19 (6) ◽  
pp. 419-433 ◽  
Author(s):  
Siyamak Shahab ◽  
Masoome Sheikhi ◽  
Liudmila Filippovich ◽  
Evgenij Dikusar ◽  
Anhelina Pazniak ◽  
...  
Keyword(s):  
Density Functional ◽  
Energy Gap ◽  
Experimental Studies ◽  
Antioxidant Property ◽  
Nbo Analysis ◽  
Antioxidant Potential ◽  
Functional Theory ◽  
Homo And Lumo ◽  
Intramolecular Hydrogen ◽  
Activity Mechanism

: In this study, the antioxidant property of new synthesized azomethins has been investigated as theoretical and experimental. Methods and Results: Density functional theory (DFT) was employed to investigate the Bond Dissociation Enthalpy (BDE), Mulliken Charges, NBO analysis, Ionization Potential (IP), Electron Affinities (EA), HOMO and LUMO energies, Hardness (η), Softness (S), Electronegativity (µ), Electrophilic Index (ω), Electron Donating Power (ω-), Electron Accepting Power (ω+) and Energy Gap (Eg) in order to deduce scavenging action of the two new synthesized azomethines (FD-1 and FD-2). Spin density calculations and NBO analysis were also carried out to understand the antioxidant activity mechanism. Comparison of BDE of FD-1 and FD-2 indicate the weal antioxidant potential of these structures. Conclusion: FD-1 and FD-2 have very high antioxidant potential due to the planarity and formation of intramolecular hydrogen bonds.

scholarly journals Theoretical Study of the Structures of 4-(2,3,5,6-Tetrafluoropyridyl)Diphenylphosphine Oxide and Tris(Pentafluorophenyl)Phosphine Oxide: Why Does the Crystal Structure of (Tetrafluoropyridyl)Diphenylphosphine Oxide Have Two Different P=O Bond Lengths?

Molecules ◽  
2020 ◽  
Vol 25 (12) ◽  
pp. 2778
Author(s):  
Joseph R. Lane ◽  
Graham C. Saunders
Keyword(s):  
Crystal Structure ◽  
Hydrogen Bonding ◽  
Phosphine Oxide ◽  
Density Functional ◽  
Lone Pair ◽  
Diphenylphosphine Oxide ◽  
Functional Theory ◽  
Weak Hydrogen Bonding ◽  
Independent Molecules ◽  
The Difference

The crystal structure of 4-(2,3,5,6-tetrafluoropyridyl)diphenylphosphine oxide (1) contains two independent molecules in the asymmetric unit. Although the molecules are virtually identical in all other aspects, the P=O bond distances differ by ca. 0.02 Å. In contrast, although tris(pentafluorophenyl)phosphine oxide (2) has a similar crystal structure, the P=O bond distances of the two independent molecules are identical. To investigate the reason for the difference, a density functional theory study was undertaken. Both structures comprise chains of molecules. The attraction between molecules of 1, which comprises lone pair–π, weak hydrogen bonding and C–H∙∙∙arene interactions, has energies of 70 and 71 kJ mol−1. The attraction between molecules of 2 comprises two lone pair–π interactions, and has energies of 99 and 100 kJ mol−1. There is weak hydrogen bonding between molecules of adjacent chains involving the oxygen atom of 1. For one molecule, this interaction is with a symmetry independent molecule, whereas for the other, it also occurs with a symmetry related molecule. This provides a reason for the difference in P=O distance. This interaction is not possible for 2, and so there is no difference between the P=O distances of 2.

Electronic Structure and Optical Properties of Non-Metals (N, F, P, Cl, S)-Doped Cubic NaTaO3 by Density Functional Theory

2009 ◽  
Vol 79-82 ◽  
pp. 1245-1248 ◽  
Author(s):  
Pei Lin Han ◽  
Xiao Jing Wang ◽  
Yan Hong Zhao ◽  
Chang He Tang
Keyword(s):  
Density Functional Theory ◽  
Optical Properties ◽  
Electronic Structure ◽  
Visible Light ◽  
Absorption Edge ◽  
Density Functional ◽  
Red Shift ◽  
Functional Theory ◽  
Photoactive Materials ◽  
Metal Doped

Electronic structure and optical properties of non-metals (N, S, F, P, Cl) -doped cubic NaTaO3 were investigated systematically by density functional theory (DFT). The results showed that the substitution of (N, S, P, Cl) for O in NaTaO3 was effective in narrowing the band-gap relative to the F-doped NaTaO3. The larger red shift of the absorption edge and the higher visible light absorption at about 520 nm were found for the (N and P)-doped NaTaO3. The excitation from the impurity states to the conduction band may account for the red shift of the absorption edge in an electron-deficiency non-metal doped NaTaO3. The obvious absorption in the visible light region for (N and P)-doped NaTaO3 provides an important guidance for the design and preparation of the visible light photoactive materials.

Study on adsorption of CO and CO2 by graphene gas sensor

2021 ◽  
pp. 2150154
Author(s):  
Wenchao Tian ◽  
Jiahao Niu ◽  
Wenhua Li ◽  
Xiaohan Liu
Keyword(s):  
Gas Sensors ◽  
Active Sites ◽  
Density Functional ◽  
Gas Adsorption ◽  
Experimental Studies ◽  
Detection Accuracy ◽  
Functional Theory ◽  
Vacancy Defects ◽  
Adsorption Of Co ◽  
Detection Characteristics

The two-dimensional (2D) plane of graphene has many active sites for gas adsorption. It has broad application prospects in the field of MEMS gas sensors. At present, there are many experimental studies on graphene gas sensors, but it is difficult to accurately control various influencing factors in the experiments. Therefore, this paper applies the first principle based on density functional theory to study the adsorption and detection characteristics of graphene on CO and CO2. The first-principles analysis method was used to study the adsorption characteristics and sensitivity of graphene. The results show that the inductive graphene has a sensitivity of 1.55% and 0.77% for CO and CO2, respectively. The Stone–Wales defects and multi-vacancy defects have greatly improved the sensitivity of graphene to CO, which is 35.25% and 4.14%, respectively. Introduction of defects increases the sensitivity of detection of CO and CO2, but also improves the selective gas detection material of these two gases. Thus, the control and selectively introducing defects may improve the detection accuracy of the graphene CO and CO2.

Sign in / Sign up

Export Citation Format

Share Document