scholarly journals Living Bacteria Directly Embedded into Electrospun Nanofibers: Design of New Anode for Bio-Electrochemical Systems

Nanomaterials ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 3088
Author(s):  
Giulia Massaglia ◽  
Adriano Sacco ◽  
Angelica Chiodoni ◽  
Candido Fabrizio Pirri ◽  
Marzia Quaglio

The aim of this work is the optimization of electrospun polymeric nanofibers as an ideal reservoir of mixed electroactive consortia suitable to be used as anodes in Single Chamber Microbial Fuel Cells (SCMFCs). To reach this goal the microorganisms are directly embedded into properly designed nanofibers during the electrospinning process, obtaining so called nanofiber-based bio-composite (bio-NFs). This research approach allowed for the designing of an advanced nanostructured scaffold, able to block and store the living microorganisms inside the nanofibers and release them only after exposure to water-based solutions and electrolytes. To reach this goal, a water-based polymeric solution, containing 5 wt% of polyethylene oxide (PEO) and 10 wt% of environmental microorganisms, is used as the initial polymeric solution for the electrospinning process. PEO is selected as the water-soluble polymer to ensure the formation of nanofiber mats offering features of biocompatibility for bacteria proliferation, environment-friendliness and, high ionic conductivity. In the present work, bio-NFs, based on living microorganisms directly encapsulated into the PEO nanofiber mats, were analyzed and compared to PEO-NFs made of PEO only. Scanning electron microscopy allowed researchers to confirm the rise of a typical morphology for bio-NFs, evidencing the microorganisms’ distribution inside them, as confirmed by fluorescence optical microscopy. Moreover, the latter technique, combined with optical density measurements, allowed for demonstrating that after electrospinning, the processed microorganisms preserved their proliferation capability, and their metabolic activity after exposure to the water-based electrolyte. To demonstrate that the energy-production functionality of exo-electrogenic microorganisms was preserved after the electrospinning process, the novel designed nanomaterials, were directly deposited onto carbon paper (CP), and were applied as anode electrodes in Single Chamber Microbial Fuel Cells (SCMFCs). It was possible to appreciate that the maximum power density reached by bio-NFs, which resulted in being double of the ones achieved with PEO-NFs and bare CP. SCMFCs with bio-NFs applied as anodic electrodes reached a current density value, close to (250 ± 5.2) mA m−2, which resulted in being stable over time and was comparable with the one obtained with carbon-based electrode, thus confirming the good performance of the whole device.

Materials ◽  
2022 ◽  
Vol 15 (1) ◽  
pp. 379
Author(s):  
Ignacio T. Vargas ◽  
Natalia Tapia ◽  
John M. Regan

During the last decade, bioprospecting for electrochemically active bacteria has included the search for new sources of inoculum for microbial fuel cells (MFCs). However, concerning power and current production, a Geobacter-dominated mixed microbial community derived from a wastewater inoculum remains the standard. On the other hand, cathode performance is still one of the main limitations for MFCs, and the enrichment of a beneficial cathodic biofilm emerges as an alternative to increase its performance. Glucose-fed air-cathode reactors inoculated with a rumen-fluid enrichment and wastewater showed higher power densities and soluble chemical oxygen demand (sCOD) removal (Pmax = 824.5 mWm−2; ΔsCOD = 96.1%) than reactors inoculated only with wastewater (Pmax = 634.1 mWm−2; ΔsCOD = 91.7%). Identical anode but different cathode potentials suggest that differences in performance were due to the cathode. Pyrosequencing analysis showed no significant differences between the anodic community structures derived from both inocula but increased relative abundances of Azoarcus and Victivallis species in the cathodic rumen enrichment. Results suggest that this rarely used inoculum for single-chamber MFCs contributed to cathodic biofilm improvements with no anodic biofilm effects.


2019 ◽  
Vol 75 ◽  
pp. 163-168 ◽  
Author(s):  
Chin-Tsan Wang ◽  
Thangavel Sangeetha ◽  
Wei-Mon Yan ◽  
Wen-Tong Chong ◽  
Lip-Huat Saw ◽  
...  

2013 ◽  
Vol 534 ◽  
pp. 76-81 ◽  
Author(s):  
Enas Taha Kasem ◽  
Takuya Tsujiguchi ◽  
Nobuyoshi Nakagawa

Effect of modification of carbon paper with a thin layer of cobalt or gold on the performance of yeast-based microbial fuel cells was investigated. The modification was conducted by depositing Co or Au thin layer with different thickness, 5 nm and 30 nm, using a sputtering technique. The electrode performance was evaluated by measuring the electrode potentials and the fuel cell power output. The Co modification significantly increased the performance of the fuel cell, while the Au modification inhibited the performance. SEM observation indicated that the adhesion density of the yeast cells on the electrode surface was affected by the metals. It was confirmed that the electron transfer took place through the surface confined species at the mediatorless anode.


Author(s):  
R Irnawati ◽  
D Surilayani ◽  
R P Aditia ◽  
A Maldini ◽  
S Jusamatalaisi ◽  
...  

2019 ◽  
Vol 2 (3) ◽  
pp. 1891-1902 ◽  
Author(s):  
Jayesh M. Sonawane ◽  
Deepak Pant ◽  
Prakash C. Ghosh ◽  
Samuel B. Adeloju

Sign in / Sign up

Export Citation Format

Share Document