scholarly journals L-Aspartic Acid Capped CdS Quantum Dots as a High Performance Fluorescence Assay for Sliver Ions (I) Detection

Nanomaterials ◽  
2019 ◽  
Vol 9 (8) ◽  
pp. 1165 ◽  
Author(s):  
Zhezhe Wang ◽  
Xuechun Xiao ◽  
Yue Yang ◽  
Tong Zou ◽  
Xinxin Xing ◽  
...  

A new high performance fluorescence assay for detection of Ag+ based on CdS quantum dots (QDs) using L-Aspartic acid (L-Asp) as a stabilizer was proposed in this work. The CdS quantum dots conjugation with L-Aspartic acid (L-Asp@CdS QDs) were successfully synthesized via a simple hydrothermal process. The QDs have a fluorescence emission band maximum at 595 nm with a quantum yield of 11%. The obtained CdS QDs exhibit a particle size of 1.63 ± 0.28 nm and look like quantum dot flowers. Basically, the fluorescence intensity of L-Asp@CdS QDs can be enhanced only upon addition of Ag+ and a redshift in the fluorescence spectrum was observed. Under optimum conditions, the fluorescence enhancement of L-Asp@CdS QDs appeared to exhibit a good linear relationship in between 100–7000 nM (R2 = 0.9945) with the Ag+ concentration, with a detection limit of 39 nM. The results indicated that the L-Asp@CdS QDs were well used in detection for Ag+ as fluorescence probe in aqueous solution with high sensitivity and selectivity. Moreover, the sensing system has been applied in detection Ag+ in real water samples. The recovery test results were 98.6%~113%, and relative standard deviation (n = 5) is less than 3.6%, which was satisfactory.

RSC Advances ◽  
2016 ◽  
Vol 6 (89) ◽  
pp. 85795-85801 ◽  
Author(s):  
Xiaotong Liu ◽  
Weidan Na ◽  
Zhengyi Qu ◽  
Xingguang Su

The fluorescence of CdS QDs was first quenched by hemoglobin and then restored with the increasing concentration of the lysozyme in a certain range. Therefore, a fluorescence assay for the determination of lysozyme was established.


Nanomaterials ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 1701 ◽  
Author(s):  
Ruowen Liang ◽  
Zhoujun He ◽  
Chen Zhou ◽  
Guiyang Yan ◽  
Ling Wu

In this work, CdS quantum dots (QDs) were planted on magnetically recyclable porous Fe2O3 (denoted as F450) to obtain CdS QDs/porous Fe2O3 hybrids (denoted as X–CdS/F450, in which X is the immersion times of CdS QDs). Porous Fe2O3 was first obtained by pyrolysis from an iron-containing metal–organic framework by a two-step calcination method. Next, CdS QDs (of average size 3.0 nm) were uniformly and closely attached to the porous F450 via a sequential chemical-bath deposition strategy. As expected, the X–CdS/F450 hybrids serve as high-performance photocatalysts for the degradation of bisphenol A, a typical endocrine-disrupting chemical. Almost ∼100% of the bisphenol A was degraded over 5-CdS/F450 after visible light irradiation for 30 min (λ ≥ 420 nm). In comparison, the degradation efficiency of pure F450 powder is 59.2%. The high performance of 5-CdS/F450 may be ascribable to the fast electron transport of porous F450, the intense visible-light absorption of the CdS QDs and the matched energy levels between CdS and F450. More significantly, through the photocatalytic degradation reaction, the X–CdS/F450 hybrids can easily be recovered magnetically and reused in subsequent cycles, indicating their stability and recyclability.


2021 ◽  
Author(s):  
Rahman Hallaj ◽  
Zahra Hosseinchi

Abstract This work focuses on the synthesis of novel modified core-shell CdTe/CdS quantum dots (QDs) and develops as a fluorescence sensor for glucose determination. The (E)-2,2'-(4,4'-dioxo-2,2'-dithioxo-2H,2'H-[5,5'-bithiazolylidene]-3,3'(4H,4'H)-diyl)bis(3- mercaptopropanoic acid) (DTM) as a new derivative of thiazolidine was synthesized and characterized and used to surface-modification of CdTe/CdS QDs. DTM-capped CdTe/CdS QDs used to immobilization of glucose oxidase (GOD). The intensity fluorescence emission of the CdSe/CdS-DTM/GOD is highly sensitive to the concentration of H2O2 as a byproduct of the catalytic oxidation of glucose. The experimental results showed that the quenched fluorescence was proportional to the glucose concentration within the range of 10 nM − 0.32 µM under optimized experimental conditions. The limit of detection of this system was found to be 4.3 nM. Compared with most of the existing methods, this newly developed system possesses many advantages, including simplicity, low cost, and good sensitivity.


The Analyst ◽  
2021 ◽  
Author(s):  
Hui-Jun Zhang ◽  
Jin Zhu ◽  
Ning Bao ◽  
Shou-Nian Ding

The mechanism of enhanced ECL of MPA@CdS QDs by EDC activation was investigated, and a sandwich-type ECL immunosensor has been designed for Zika virus detection.


RSC Advances ◽  
2021 ◽  
Vol 11 (14) ◽  
pp. 7961-7971
Author(s):  
N. D. Vinh ◽  
P. M. Tan ◽  
P. V. Do ◽  
S. Bharti ◽  
V. X. Hoa ◽  
...  

The role of samarium (Sm) dopant on the structural, morphological, and optical properties of CdS QDs and CdS/ZnS core/shell QDs was methodically reported.


Nanomaterials ◽  
2018 ◽  
Vol 9 (1) ◽  
pp. 32 ◽  
Author(s):  
Zhezhe Wang ◽  
Xuechun Xiao ◽  
Tong Zou ◽  
Yue Yang ◽  
Xinxin Xing ◽  
...  

Citric acid capped CdS quantum dots (CA-CdS QDs), a new assembled fluorescent probe for copper ions (Cu2+), was synthesized successfully by a simple hydrothermal method. In this work, the fluorescence sensor for the detection of heavy and transition metal (HTM) ions has been extensively studied in aqueous solution. The results of the present study indicate that the obtained CA-CdS QDs could detect Cu2+ with high sensitivity and selectivity. It found that the existence of Cu2+ has a significant fluorescence quenching with a large red shifted (from greenish-yellow to yellowish-orange), but not in the presence of 17 other HTM ions. As a result, Cu2S, the energy level below the CdS conduction band, could be formed at the surface of the CA-CdS QDs and leads to the quenching of fluorescence of CA-CdS QDs. Under optimal conditions, the copper ions detection range using the synthesized fluorescence sensor was 1.0 × 10‒8 M to 5.0 × 10‒5 M and the limit of detection (LOD) is 9.2 × 10‒9 M. Besides, the as-synthesized CA-CdS QDs sensor exhibited good selectivity toward Cu2+ relative to other common metal ions. Thus, the CA-CdS QDs has potential applications for detecting Cu2+ in real water samples.


2019 ◽  
Vol 7 (17) ◽  
pp. 10225-10230 ◽  
Author(s):  
Ali Imran Channa ◽  
Xin Tong ◽  
Jing-Yin Xu ◽  
Yongchen Liu ◽  
Changmeng Wang ◽  
...  

Near-infrared-emitting CuGaS2/CdS QDs with enhanced visible light absorption were developed to achieve high efficiency photoelectrochemical cells.


2016 ◽  
Vol 16 (12) ◽  
pp. 12282-12287 ◽  
Author(s):  
Fangdi Wei ◽  
Hailin Yu ◽  
Chunting Hu ◽  
Zheng Cai ◽  
Jing Yang ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document