scholarly journals Reduced Graphene Oxide/Poly(Pyrrole-co-Thiophene) Hybrid Composite Materials: Synthesis, Characterization, and Supercapacitive Properties

Polymers ◽  
2020 ◽  
Vol 12 (5) ◽  
pp. 1110
Author(s):  
Anwar ul Haq Ali Shah ◽  
Sami Ullah ◽  
Salma Bilal ◽  
Gul Rahman ◽  
Humaira Seema
Keyword(s):  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Hybrid Composite ◽  
Electrode Materials ◽  
Materials Synthesis ◽  
X Ray ◽  
Reduced Graphene ◽  
Vis Spectroscopy ◽  
Scan Rate ◽  
Energy Storage Properties

Reduced graphene oxide/poly(pyrrol-co-thiophene) (RGO/COP), prepared by facile in-situ oxidative copolymerization, is reported as a new hybrid composite material with improved supercapacitance performance as compared to the respective homopolymers and their composites with RGO. The as-prepared hybrid materials were characterized with ultraviolet–visible (UV–Vis) spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive X-ray (EDX) analysis. The electrochemical behavior and energy storage properties of the materials were tested by cyclic voltammetry (CV), galvanostatic charge/discharge (GCD), and electrostatic impedance spectroscopy (EIS) techniques in 0.5 M H2SO4. The specific capacitance (Csp) for RGO/COP calculated from the CV curve was 467 F/g at a scan rate of 10 mV/s. While the Csp calculated from the GCD was 417 F/g at a current density of 0.81 A/g. The energy density calculated was 86.4 Wh/kg with a power density of 630 W/kg. The hybrid composite exhibits good cyclic stability with 65% capacitance retention after 1000 cycles at a scan rate of 100 mV/s. The present work brings a significance development of RGO/COP composites to the electrode materials for pseudocapacitive application.

Facile Synthesis of Modified MnO2/Reduced Graphene Oxide Nanocomposites and their Application in Supercapacitors

NANO ◽  
2020 ◽  
Vol 15 (08) ◽  
pp. 2050099
Author(s):  
Lijun Chen ◽  
Hongfeng Yin ◽  
Yuchao Zhang ◽  
Huidong Xie
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Specific Capacitance ◽  
Reduced Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
Electrode Materials ◽  
Normal Pressure ◽  
X Ray ◽  
Assembly Method ◽  
Reduced Graphene

Herein, KH-550 was used as surface modifier to prepare modified MnO2/reduced graphene oxide (M-MnO2/rGO) composite electrode materials by utilizing electrostatic interaction at low temperature and normal pressure. X-ray diffraction, scanning electron microscopy, transmission electron microscopy and X-ray photoelectron spectroscopy were adopted to characterize the material’s phase, morphology, and valence state of elements. The electrochemical properties of the material were measured using a three-electrode system. The results indicate a decrease in the size of the modified MnO2 particles, and that they were uniformly distributed on the rGO sheets. The M-MnO2/rGO composite attained a specific capacitance of 326[Formula: see text]F[Formula: see text]g[Formula: see text] in a solution of 1[Formula: see text]mol[Formula: see text]L[Formula: see text] Na2SO4 at a current density of 0.5[Formula: see text]A[Formula: see text]g[Formula: see text]. The specific capacitance of the material was 92.4% after 1000 cycles. The electrostatic self-assembly method effectively solved the problem of reducing the cycling stability while improving the specific capacitance of the composite materials, and further improved the possibility of applying MnO2/rGO in the field of supercapacitors.

scholarly journals Photocatalytic Degradation of Organic Pollutant using Reduced Graphene Oxide

2019 ◽  
Vol 8 (4S2) ◽  
pp. 870-872
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Photocatalytic Degradation ◽  
Reduced Graphene Oxide ◽  
Organic Pollutant ◽  
X Ray Diffraction ◽  
X Ray ◽  
Reduced Graphene ◽  
Vis Spectroscopy ◽  
Scaning Electron Microscopy

A simple eco friendly preparation of reduced graphene oxide from graphene oxide using strawberry extract is reported. As prepared reduced graphene oxide were characterized by X-Ray Diffraction, UV-Vis spectroscopy, Scaning electron microscopy and degradation performane of MB. The reduced graphene oxide was effectively degradation of MB.

scholarly journals Reduced graphene oxide supported C3N4 nanoflakes and quantum dots as metal-free catalysts for visible light assisted CO2 reduction

2019 ◽  
Vol 10 ◽  
pp. 448-458 ◽  
Author(s):  
Md Rakibuddin ◽  
Haekyoung Kim
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Visible Light ◽  
Reduced Graphene Oxide ◽  
Hybrid Materials ◽  
Photoelectron Spectroscopy ◽  
X Ray ◽  
Metal Free ◽  
Reduced Graphene ◽  
Vis Spectroscopy

The visible light photocatalytic reduction of CO2 to fuel is crucial for the sustainable development of energy resources. In our present work, we report the synthesis of novel reduced graphene oxide (rGO)-supported C3N4 nanoflake (NF) and quantum dot (QD) hybrid materials (GCN) for visible light induced reduction of CO2. The C3N4 NFs and QDs are prepared by acid treatment of C3N4 nanosheets followed by ultrasonication and hydrothermal heating at 130–190 °C for 5−20 h. It is observed that hydrothermal exposure of acid-treated graphitic carbon nitride (g-C3N4) nanosheets at low temperature generated larger NFs, whereas QDs are formed at higher temperatures. The formation of GCN hybrid materials was confirmed by powder X-ray diffraction, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, field emission scanning electron microscopy, transmission electron microscopy (TEM), and UV–vis spectroscopy. High-resolution TEM images clearly show that C3N4 QDs (average diameter of 2–3 nm) and NFs (≈20–45 nm) are distributed on the rGO surface within the GCN hybrid material. Among the as-prepared GCN hybrid materials, GCN-5 QDs exhibit excellent CO2 reductive activity for the generation of formaldehyde, HCHO (10.3 mmol h−1 g−1). Therefore, utilization of metal-free carbon-based GCN hybrid materials could be very promising for CO2 photoreduction because of their excellent activity and environmental sustainability.

Preparation of Reduced Graphene Oxide/Chitosan Composite Films with Reinforced Mechanical Strength

2012 ◽  
Vol 430-432 ◽  
pp. 247-250 ◽  
Author(s):  
Yong Qiang He ◽  
Na Na Zhang ◽  
Wen Chao Wang ◽  
Si Yao He ◽  
Qiao Juan Gong ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Composite Films ◽  
Solvent Casting ◽  
Casting Method ◽  
X Ray ◽  
Reduced Graphene ◽  
Vis Spectroscopy ◽  
Membrane Rigidity ◽  
Chitosan Composite

Reduced graphene oxide (rGO)/chitosan composite films were fabricated by a solvent casting method and cross-linked using genipin. Their properties were characterized by scanning electron microscopy, X-ray powder diffraction, Raman spectroscopy, and UV-Vis spectroscopy. When rGO was added the tensile strength and membrane rigidity of the films increased, but their swelling ability in water decreased.

scholarly journals Activated Carbon Blended with Reduced Graphene Oxide Nanoflakes for Capacitive Deionization

Nanomaterials ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1090
Author(s):  
Gbenro Folaranmi ◽  
Mikhael Bechelany ◽  
Philippe Sistat ◽  
Marc Cretin ◽  
Francois Zaviska
Keyword(s):  
Graphene Oxide ◽  
Activated Carbon ◽  
Reduced Graphene Oxide ◽  
Electrode Materials ◽  
Porous Electrodes ◽  
Water Desalination ◽  
Operating Voltage ◽  
Capacitive Deionization ◽  
X Ray ◽  
Reduced Graphene

Capacitive deionization is a second-generation water desalination technology in which porous electrodes (activated carbon materials) are used to temporarily store ions. In this technology, porous carbon used as electrodes have inherent limitations, such as low electrical conductivity, low capacitance, etc., and, as such, optimization of electrode materials by rational design to obtain hybrid electrodes is key towards improvement in desalination performance. In this work, different compositions of mixture of reduced graphene oxide (RGO) and activated carbon (from 5 to 20 wt% RGO) have been prepared and tested as electrodes for brackish water desalination. The physico-chemical and electrochemical properties of the activated carbon (AC), reduced graphene oxide (RGO), and as-prepared electrodes (AC/RGO-x) were characterized by low-temperature nitrogen adsorption measurement, scanning electron microscope (SEM), X-ray diffraction (XRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), Fourier transform infra-red (FT-IR), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). Among all the composite electrodes, AC/RGO-5 (RGO at 5 wt%) possessed the highest specific capacitance (74 F g−1) and the highest maximum salt adsorption capacity (mSAC) of 8.10 mg g−1 at an operating voltage ∆E = 1.4 V. This shows that this simple approach could offer a potential way of fabricating electrodes of accentuated carbon network of an improved electronic conductivity that’s much coveted in CDI technology.

Facile one pot microbe-mediated in situ synthesis and antibacterial activity of reduced graphene oxide-silver nanocomposite

2021 ◽  
Author(s):  
Ashwini Patil
Keyword(s):  
Antibacterial Activity ◽  
Graphene Oxide ◽  
Zeta Potential ◽  
Reduced Graphene Oxide ◽  
In Vitro Dissolution ◽  
Size Analysis ◽  
X Ray ◽  
Reduced Graphene

Abstract The present research deals with the development of a novel bioinspired in situ fabrication of reduced graphene oxide (rGO)-silver nanoparticle (AgNPs) nanocomposite (rGO@AgNCs) using microbes namely Pseudomonas aeruginosa (PA) and Staphylococcus aureus (SA). The fabricated rGO@AgNCs were characterized using Ultraviolet-visible (UV) spectroscopy, Fourier-transform infrared spectroscopy (FTIR), particle size analysis, polydispersity index (PDI), zeta potential analysis, energy dispersive X-ray analysis (EDAX), Raman spectroscopy, powder X-ray diffraction (PXRD), high-resolution transmission electron microscopy (HR-TEM) analysis, etc. Furthermore, the rGO@AgNCs-PA and rGO@AgNCs-SA interaction with serum protein, pH stability study, and in vitro dissolution of AgNPs were also performed. The research findings of the proposed study demonstrated the simultaneous reduction of graphene oxide (GO) and AgNPs and the formation of rGO@AgNCs in the presence of microbes. The in vitro dissolution studies of rGO@AgNCs composites showed better AgNPs dissolution with controlled release and offered remarkable matrix integrity throughout the dissolution period. The size and stability of rGO@AgNCs-PA and rGO@AgNCs-SA had no significant changes at physiological pH 7.4. A minimal decrease in the zeta potential of rGO@AgNCs was observed, which may be due to the weak interaction of nanocomposites and albumin. The antibacterial application of the synthesized nanocomposite was evaluated against a pathogenic mastitis-forming bacterium. The obtained results suggested an admirable antibacterial activity of synthesized nanocomposites against the tested microbes. This knowledge will assist the scientific fraternity in designing novel antibacterial agents with enhanced antibacterial activity against various veterinary pathogens in near future.

Sign in / Sign up

Export Citation Format

Share Document