scholarly journals Crack Propagation and Fracture Process Zone (FPZ) of Wood in the Longitudinal Direction Determined Using Digital Image Correlation (DIC) Technique

2019 ◽  
Vol 11 (13) ◽  
pp. 1562 ◽  
Author(s):  
Ying Yu ◽  
Weihang Zeng ◽  
Wen Liu ◽  
He Zhang ◽  
Xiaohong Wang
Keyword(s):  
Digital Image Correlation ◽  
Digital Image ◽  
Strain Field ◽  
Fracture Process ◽  
Fracture Process Zone ◽  
Process Zone ◽  
Longitudinal Direction ◽  
Image Correlation ◽  
Elastic Crack ◽  
Dic Technique

As a state-of-the-art method, the digital image correlation (DIC) technique is used to capture the fracture properties of wood along the longitudinal direction, such as the crack propagation, the strain field, and the fracture process zone (FPZ). Single-edge notched (SEN) specimens made of Douglas fir (Pseudotsuga menziesii) from Canada with different notch-to-depth ratios are tested by three-point-bending (3-p-b) experiment. The crack mouth opening displacements (CMOD) measured by the clip gauge and DIC technique agree well with each other, verifying the applicability of the DIC technique. Then, the quasi-brittle fracture process of wood is analyzed by combing the load-CMOD curve and the strain field in front of the preformed crack. Additionally, the equivalent elastic crack length is calculated using the linear superposition hypothesis. The comparison between the FPZ evolution and the equivalent elastic crack shows that specimens with higher notch-to-depth ratios have better cohesive effect and higher cracking resistance.

Assessment of the fracture process zone in rocks using digital image correlation technique: The role of mode-mixity, size, geometry and material

2019 ◽  
Vol 29 (4) ◽  
pp. 646-666 ◽  
Author(s):  
M Moazzami ◽  
MR Ayatollahi ◽  
A Akhavan-Safar
Keyword(s):  
Digital Image Correlation ◽  
Fracture Process ◽  
Fracture Process Zone ◽  
Process Zone ◽  
Specimen Size ◽  
Image Correlation ◽  
Mode I ◽  
Mode Ii ◽  
Mode Mixity ◽  
Zone Length

This paper presents an experimental research on the length and shape of the fracture process zone of rocks under mode I, mixed mode (I + II) and mode II loading conditions for different geometries of cracked specimens made of two types of rocks, using the digital image correlation approach. Single edge notch bending (SENB) and semi-circular bend specimens are the two geometries considered. In order to investigate the effect of the specimen size on the fracture process zone length, rocks with three different sizes are produced and tested. To investigate the effect of the mode mixity on the fracture process zone length of marble and sandstone, the specimens are tested under different modes of loading. According to the experimental results, it is found that the fracture process zone length changes with mode ratio, specimen size, geometry and the material properties. The fracture process zone length increases when the mode of loading moves from mode I to mode II. Experimental results also show that fracture process zone becomes longer for specimens with larger sizes. The fracture process zone is also affected by the specimen geometry.

Methodology for in situ stress intensity factor determination on cracked structures by digital image correlation

2010 ◽  
Vol 1 (4) ◽  
pp. 344-357 ◽  
Author(s):  
V. Richter‐Trummer ◽  
P.M.G.P. Moreira ◽  
S.D. Pastrama ◽  
M.A.P. Vaz ◽  
P.M.S.T. de Castro
Keyword(s):  
Stress Intensity Factor ◽  
Stress Intensity ◽  
Digital Image Correlation ◽  
Intensity Factor ◽  
Digital Image ◽  
Strain Field ◽  
Image Correlation ◽  
Content Type ◽  
Cracked Structures

PurposeThe purpose of this paper is to develop a methodology for in situ stress intensity factor (SIF) determination that can be used for the analysis of cracked structures. The technique is based on digital image correlation (DIC) combined with an overdetermined algorithm.Design/methodology/approachThe linear overdeterministic algorithm for calculating the SIF based on stress values around the crack tip is applied to a strain field obtained by DIC.FindingsAs long as the image quality is sufficiently high, a good accuracy can be obtained for the measured SIF. The crack tip can be automatically detected based on the same strain field. The use of the strain field instead of the displacement field, eliminates problems related to the rigid body motion of the analysed structure.Practical implicationsIn future works, based on the applied techniques, the SIF of complex cracked plane stress structures can be accurately determined in real engineering applications.Originality/valueThe paper demonstrates application of known techniques, refined for other applications, also the use of stress field for SIF overdeterministic calculations.

scholarly journals A new methodology to identify minimum strain anatomical lines based on 3-D digital image correlation

2017 ◽  
Vol 8 (2) ◽  
pp. 337-347 ◽  
Author(s):  
Jorge Barrios-Muriel ◽  
Francisco Javier Alonso Sánchez ◽  
David Rodríguez Salgado ◽  
Francisco Romero-Sánchez
Keyword(s):  
Digital Image Correlation ◽  
Digital Image ◽  
Strain Field ◽  
Three Dimensional ◽  
Wearable Devices ◽  
Plane Motion ◽  
Human Motion ◽  
The Body ◽  
Image Correlation ◽  
Minimum Deformation

Abstract. Today there is continuous development of wearable devices in various fields such as sportswear, orthotics and personal gadgets, among others. The design of these devices involves the human body as a support environment. Based on this premise, the development of wearable devices requires an improved understanding of the skin strain field of the body segment during human motion. This paper presents a methodology based on a three dimensional digital image correlation (3D-DIC) system to measure the skin strain field and to estimate anatomical lines with minimum deformation as design criteria for the aforementioned wearable devices. The errors of displacement and strain measurement related to 3-D reconstruction and out-of-plane motion are investigated and the results are acceptable in the case of large deformation. This approach can be an effective tool to improve the design of wearable devices in the clinical orthopaedics and ergonomics fields, where comfort plays a key role in supporting the rehabilitation process.

Comparison of Digital Image Correlation (DIC) Technique with Nanomaterial-Based Sensor for the Analysis of Strain Measurements

2021 ◽  
pp. 2150032
Author(s):  
A. Deepak ◽  
D. F. L. Jenkins
Keyword(s):  
Digital Image Correlation ◽  
Digital Image ◽  
Standard Specimen ◽  
Strain Sensor ◽  
Constant Load ◽  
Strain Sensors ◽  
Image Correlation ◽  
Strain Measurements ◽  
American Society ◽  
Dic Technique

Digital Image Correlation (DIC) techniques can be used to visually map and measure strain in materials such as metals and metallic alloys. The strain induced in an American Society for Testing and Materials (ASTMs) standard specimen can be measured using a DIC technique. Image patterns indicating the localized strain variations as a function of time for the constant load applied were also obtained. Results obtained using the DIC technique were more accurate compared to conventional strain sensors. DIC results were also compared with nanomaterial-based strain sensor output. Localized strain induced in the material can be visualized and quantified analytically using DIC.

Sign in / Sign up

Export Citation Format

Share Document