scholarly journals Artificial Neural Networks to Retrieve Land and Sea Skin Temperature from IASI

2020 ◽  
Vol 12 (17) ◽  
pp. 2777
Author(s):  
Sarah Safieddine ◽  
Ana Claudia Parracho ◽  
Maya George ◽  
Filipe Aires ◽  
Victor Pellet ◽  
...  
Keyword(s):  
Skin Temperature ◽  
Climate Trends ◽  
Remote Sensors ◽  
Ground Station ◽  
Entropy Reduction ◽  
Surface Skin Temperature ◽  
Artificial Neural ◽  
Spatio Temporal ◽  
Artificial Neural Network Ann ◽  
Station Location

Surface skin temperature (Tskin) derived from infrared remote sensors mounted on board satellites provides a continuous observation of Earth’s surface and allows the monitoring of global temperature change relevant to climate trends. In this study, we present a fast retrieval method for retrieving Tskin based on an artificial neural network (ANN) from a set of spectral channels selected from the Infrared Atmospheric Sounding Interferometer (IASI) using the information theory/entropy reduction technique. Our IASI Tskin product (i.e., TANN) is evaluated against Tskin from EUMETSAT Level 2 product, ECMWF Reanalysis (ERA5), SEVIRI observations, and ground in situ measurements. Good correlations between IASI TANN and the Tskin from other datasets are shown by their statistic data, such as a mean bias and standard deviation (i.e., [bias, STDE]) of [0.55, 1.86 °C], [0.19, 2.10 °C], [−1.5, 3.56 °C], from EUMETSAT IASI L-2 product, ERA5, and SEVIRI. When compared to ground station data, we found that all datasets did not achieve the needed accuracy at several months of the year, and better results were achieved at nighttime. Therefore, comparison with ground-based measurements should be done with care to achieve the ±2 °C accuracy needed, by choosing, for example, a validation site near the station location. On average, this accuracy is achieved, in particular at night, leading to the ability to construct a robust Tskin dataset suitable for Tskin long-term spatio-temporal variability and trend analysis.

scholarly journals Skin temperature from the Thermal Infrared Sounder IASI

2019 ◽  
Author(s):  
Sarah Safieddine ◽  
Ana Claudia Parracho ◽  
Maya George ◽  
Filipe Aires ◽  
Victor Pellet ◽  
...  
Keyword(s):  
Neural Network ◽  
Skin Temperature ◽  
Land Surface ◽  
Climate Trends ◽  
Infrared Sensors ◽  
Temperature Changes ◽  
Infrared Measurements ◽  
Entropy Reduction ◽  
Spatio Temporal

Abstract. Skin temperature (Tskin) derived from infrared sensors on board satellites provides a continuous view of Earth’s surface day and night and allows for the monitoring of global temperature changes relevant for climate trends. Tskin from the Infrared Atmospheric Sounding Interferometer (IASI) has not been properly exploited to date to assess its long-term spatio-temporal variability and no current homogenous Tskin record from IASI exists. In this study, we present a fast retrieval method of Tskin based on an artificial neural network from a set of IASI channels selected using the information theory/entropy reduction technique. We compare and validate our IASI Tskin product with that from EUMETSAT Level 2, ECMWF Reanalysis ERA5, SEVIRI land-surface temperature products, as well as ground measurements. Our results show good correlation between the IASI neural network product and the datasets used for validation, with a standard deviation between 1 and 4 °C. This method can be applied to other infrared measurements, and allows for the construction of a robust Tskin dataset, making it suitable for trend analysis.

Application of the Artificial Neural Network (ANN) Method as MPPT Photovoltaic for DC Source Storage

2019 ◽  
Vol 12 (3) ◽  
pp. 145 ◽  
Author(s):  
Epyk Sunarno ◽  
Ramadhan Bilal Assidiq ◽  
Syechu Dwitya Nugraha ◽  
Indhana Sudiharto ◽  
Ony Asrarul Qudsi ◽  
...  
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

Random Forest (RF) and Artificial Neural Network (ANN) Algorithms for LULC Mapping

2020 ◽  
Vol 38 (4A) ◽  
pp. 510-514
Author(s):  
Tay H. Shihab ◽  
Amjed N. Al-Hameedawi ◽  
Ammar M. Hamza
Keyword(s):  
Neural Network ◽  
Remote Sensing ◽  
Artificial Neural Network ◽  
Random Forest ◽  
Satellite Image ◽  
Landsat 8 ◽  
Optical Remote Sensing ◽  
Data Set ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

In this paper to make use of complementary potential in the mapping of LULC spatial data is acquired from LandSat 8 OLI sensor images are taken in 2019.  They have been rectified, enhanced and then classified according to Random forest (RF) and artificial neural network (ANN) methods. Optical remote sensing images have been used to get information on the status of LULC classification, and extraction details. The classification of both satellite image types is used to extract features and to analyse LULC of the study area. The results of the classification showed that the artificial neural network method outperforms the random forest method. The required image processing has been made for Optical Remote Sensing Data to be used in LULC mapping, include the geometric correction, Image Enhancements, The overall accuracy when using the ANN methods 0.91 and the kappa accuracy was found 0.89 for the training data set. While the overall accuracy and the kappa accuracy of the test dataset were found 0.89 and 0.87 respectively.

Detection of Biomedical Images by Using Bio-inspired Artificial Intelligent

2020 ◽  
Vol 38 (2A) ◽  
pp. 255-264
Author(s):  
Hanan A. R. Akkar ◽  
Sameem A. Salman
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Mean Square Error ◽  
Average Rate ◽  
Mean Square ◽  
Performance Measurements ◽  
Artificial Intelligent ◽  
Average Mean Square Error ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

Computer vision and image processing are extremely necessary for medical pictures analysis. During this paper, a method of Bio-inspired Artificial Intelligent (AI) optimization supported by an artificial neural network (ANN) has been widely used to detect pictures of skin carcinoma. A Moth Flame Optimization (MFO) is utilized to educate the artificial neural network (ANN). A different feature is an extract to train the classifier. The comparison has been formed with the projected sample and two Artificial Intelligent optimizations, primarily based on classifier especially with, ANN-ACO (ANN training with Ant Colony Optimization (ACO)) and ANN-PSO (training ANN with Particle Swarm Optimization (PSO)). The results were assessed using a variety of overall performance measurements to measure indicators such as Average Rate of Detection (ARD), Average Mean Square error (AMSTR) obtained from training, Average Mean Square error (AMSTE) obtained for testing the trained network, the Average Effective Processing Time (AEPT) in seconds, and the Average Effective Iteration Number (AEIN). Experimental results clearly show the superiority of the proposed (ANN-MFO) model with different features.

scholarly journals Geometry and Distortion Prediction of Multiple Layers for Wire Arc Additive Manufacturing with Artificial Neural Networks

2021 ◽  
Vol 11 (10) ◽  
pp. 4694
Author(s):  
Christian Wacker ◽  
Markus Köhler ◽  
Martin David ◽  
Franziska Aschersleben ◽  
Felix Gabriel ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Welding Process ◽  
High Energy ◽  
Welding Distortion ◽  
Direct Energy Deposition ◽  
Direct Energy ◽  
Industrial Use ◽  
Artificial Neural ◽  
Artificial Neural Network Ann ◽  
Wire Arc Additive Manufacturing

Wire arc additive manufacturing (WAAM) is a direct energy deposition (DED) process with high deposition rates, but deformation and distortion can occur due to the high energy input and resulting strains. Despite great efforts, the prediction of distortion and resulting geometry in additive manufacturing processes using WAAM remains challenging. In this work, an artificial neural network (ANN) is established to predict welding distortion and geometric accuracy for multilayer WAAM structures. For demonstration purposes, the ANN creation process is presented on a smaller scale for multilayer beads on plate welds on a thin substrate sheet. Multiple concepts for the creation of ANNs and the handling of outliers are developed, implemented, and compared. Good results have been achieved by applying an enhanced ANN using deformation and geometry from the previously deposited layer. With further adaptions to this method, a prediction of additive welded structures, geometries, and shapes in defined segments is conceivable, which would enable a multitude of applications for ANNs in the WAAM-Process, especially for applications closer to industrial use cases. It would be feasible to use them as preparatory measures for multi-segmented structures as well as an application during the welding process to continuously adapt parameters for a higher resulting component quality.

scholarly journals Predicting the 14-Day Hospital Readmission of Patients with Pneumonia Using Artificial Neural Networks (ANN)

2021 ◽  
Vol 18 (10) ◽  
pp. 5110
Author(s):  
Shu-Farn Tey ◽  
Chung-Feng Liu ◽  
Tsair-Wei Chien ◽  
Chin-Wei Hsu ◽  
Kun-Chen Chan ◽  
...  
Keyword(s):  
Neural Network ◽  
Early Stage ◽  
Characteristic Curve ◽  
Patient Discharge ◽  
Ann Model ◽  
Healthcare Settings ◽  
High Area ◽  
Icd 10 ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

Unplanned patient readmission (UPRA) is frequent and costly in healthcare settings. No indicators during hospitalization have been suggested to clinicians as useful for identifying patients at high risk of UPRA. This study aimed to create a prediction model for the early detection of 14-day UPRA of patients with pneumonia. We downloaded the data of patients with pneumonia as the primary disease (e.g., ICD-10:J12*-J18*) at three hospitals in Taiwan from 2016 to 2018. A total of 21,892 cases (1208 (6%) for UPRA) were collected. Two models, namely, artificial neural network (ANN) and convolutional neural network (CNN), were compared using the training (n = 15,324; ≅70%) and test (n = 6568; ≅30%) sets to verify the model accuracy. An app was developed for the prediction and classification of UPRA. We observed that (i) the 17 feature variables extracted in this study yielded a high area under the receiver operating characteristic curve of 0.75 using the ANN model and that (ii) the ANN exhibited better AUC (0.73) than the CNN (0.50), and (iii) a ready and available app for predicting UHA was developed. The app could help clinicians predict UPRA of patients with pneumonia at an early stage and enable them to formulate preparedness plans near or after patient discharge from hospitalization.

Sign in / Sign up

Export Citation Format

Share Document