scholarly journals Developing a New Method to Identify Flowering Dynamics of Rapeseed Using Landsat 8 and Sentinel-1/2

2020 ◽  
Vol 13 (1) ◽  
pp. 105
Author(s):  
Jichong Han ◽  
Zhao Zhang ◽  
Juan Cao

Identifying the rapeseed (Brassica napus L.) flowering dates are important for planting area estimation, growth monitoring, and yield estimation. However, there is currently a lack of data on rapeseed flowering dates at the parcel scale. In this study, a new spectral index (Normalized Rapeseed Flowering Index, NRFI) is proposed to detect rapeseed flowering dates from time series data generated from Landsat 8 OLI and Sentinel-2 sensors. This study also analyzed the feasibility of using the backscattering coefficients (VV, VH, and VV/VH) of Sentinel-1 to detect the flowering dates of rapeseed at the parcel scale. Based on the spectral and polarization characteristics of 718 rapeseed parcels collected in 2018, we developed a method to automatically identify peak flowering dates by the local maximum of NRFI series and the local minimum of VH and VV, along with the maximum of VV/VH. The results show that most of the peak flowering dates derived from Sentinel-1 and Sentinel-2 can be confirmed by the in-situ phenological observations at the Deutscher Wetterdienst (DWD) stations in Germany. The NRFI outperforms the Normalized Difference Yellow Index (NDYI) in identifying the peak flowering dates from Landsat 8. The derived medians of peak flowering dates by NRFI, NDYI (Sentinel-2), and VH are similar, while a systematic delay is observed by NDYI (Landsat 8). The method with the spectrum and backscattering coefficients will be a potential tool to identify crop flowering dynamics and map crop planting area.

2020 ◽  
Vol 12 (11) ◽  
pp. 1876 ◽  
Author(s):  
Katsuto Shimizu ◽  
Tetsuji Ota ◽  
Nobuya Mizoue ◽  
Hideki Saito

Developing accurate methods for estimating forest structures is essential for efficient forest management. The high spatial and temporal resolution data acquired by CubeSat satellites have desirable characteristics for mapping large-scale forest structural attributes. However, most studies have used a median composite or single image for analyses. The multi-temporal use of CubeSat data may improve prediction accuracy. This study evaluates the capabilities of PlanetScope CubeSat data to estimate canopy height derived from airborne Light Detection and Ranging (LiDAR) by comparing estimates using Sentinel-2 and Landsat 8 data. Random forest (RF) models using a single composite, multi-seasonal composites, and time-series data were investigated at different spatial resolutions of 3, 10, 20, and 30 m. The highest prediction accuracy was obtained by the PlanetScope multi-seasonal composites at 3 m (relative root mean squared error: 51.3%) and Sentinel-2 multi-seasonal composites at the other spatial resolutions (40.5%, 35.2%, and 34.2% for 10, 20, and 30 m, respectively). The results show that RF models using multi-seasonal composites are 1.4% more accurate than those using harmonic metrics from time-series data in the median. PlanetScope is recommended for canopy height mapping at finer spatial resolutions. However, the unique characteristics of PlanetScope data in a spatial and temporal context should be further investigated for operational forest monitoring.


2018 ◽  
Vol 10 (2) ◽  
pp. 206 ◽  
Author(s):  
Wangfei Zhang ◽  
Erxue Chen ◽  
Zengyuan Li ◽  
Lei Zhao ◽  
Yongjie Ji ◽  
...  

2020 ◽  
Author(s):  
Sang Il Lee ◽  
Willibroad Gabila Buma

<p>A decline in Lake Chad’s water level has been observed for over two decades. With millions of people relying on the lake, and considering its dynamic behavior, methods for the continuous and spatially distributed retrieval of water quantity and quality parameters are vital for proper monitoring and management initiatives. Here, we propose an integrated approach for drought, chlorophyll-a (Chl-a) and turbidity monitoring in Lake Chad using satellite datasets.</p><p>First, we used remote sensing information to constrain drought patterns over the immediate lake environment. Vegetation conditions within and around the lake was used to assess drought conditions in this area. Using Landsat multispectral images obtained between 1999 and 2018, Vegetation Temperature Condition Index (VTCI) was derived and used as an indicator for drought monitoring. Vegetation proportion from WorldView-03 images was used to evaluate the accuracy of methods used to derive VTCI. Obtained results showed that most areas experienced mild drought conditions.</p><p>Secondly, we assessed the performance of band algorithms in estimating Chl-a concentrations and turbidity levels from Landsat-8 and Sentinel-2A and 2B images. A two-band semi-analytical Chl-a and turbidity retrieval model was used for estimating the Chl-a concentrations and turbidity levels between 2015 and 2019. Due to the absence of in-situ data, estimates from the extraction models were statistically compared with datasets obtained from WorldView-03. Further inter-comparison of Chl-a and turbidity retrieved from the two sensors was carried out.</p><p>This study shows how satellite observations can be used to complement sparse and declining in situ drought, Chl-a and turbidity monitoring networks in this area. Solidifying the importance of remote sensing in areas that are difficult to access or with poor availability of conventional data sources.</p>


Water ◽  
2019 ◽  
Vol 11 (11) ◽  
pp. 2236 ◽  
Author(s):  
Viviana Gavilán ◽  
Mario Lillo-Saavedra ◽  
Eduardo Holzapfel ◽  
Diego Rivera ◽  
Angel García-Pedrero

Efficient water management in agriculture requires a precise estimate of evapotranspiration ( E T ). Although local measurements can be used to estimate surface energy balance components, these values cannot be extrapolated to large areas due to the heterogeneity and complexity of agriculture environment. This extrapolation can be done using satellite images that provide information in visible and thermal infrared region of the electromagnetic spectrum; however, most current satellite sensors do not provide this end, but they do include a set of spectral bands that allow the radiometric behavior of vegetation that is highly correlated with the E T . In this context, our working hypothesis states that it is possible to generate a strategy of integration and harmonization of the Normalized Difference Vegetation Index ( N D V I ) obtained from Landsat-8 ( L 8 ) and Sentinel-2 ( S 2 ) sensors in order to obtain an N D V I time series used to estimate E T through fit equations specific to each crop type during an agricultural season (December 2017–March 2018). Based on the obtained results it was concluded that it is possible to estimate E T using an N D V I time series by integrating data from both sensors L 8 and S 2 , which allowed to carry out an updated seasonal water balance over study site, improving the irrigation water management both at plot and water distribution system scale.


2020 ◽  
Vol 12 (18) ◽  
pp. 3068 ◽  
Author(s):  
Marta Prada ◽  
Carlos Cabo ◽  
Rocío Hernández-Clemente ◽  
Alberto Hornero ◽  
Juan Majada ◽  
...  

Forest management treatments often translate into changes in forest structure. Understanding and assessing how forests react to these changes is key for forest managers to develop and follow sustainable practices. A strategy to remotely monitor the development of the canopy after thinning using satellite imagery time-series data is presented. The aim was to identify optimal remote sensing Vegetation Indices (VIs) to use as time-sensitive indicators of the early response of vegetation after the thinning of sweet chestnut (Castanea Sativa Mill.) coppice. For this, the changes produced at the canopy level by different thinning treatments and their evolution over time (2014–2019) were extracted from VI values corresponding to two trials involving 33 circular plots (r = 10 m). Plots were subjected to one of the following forest management treatments: Control with no intervention (2800–3300 stems ha−1), Treatment 1, one thinning leaving a living stock density of 900–600 stems ha−1 and Treatment 2, a more intensive thinning, leaving 400 stems ha−1. Time series data from Landsat-8 and Sentinel-2 were collected to calculate values for different VIs. Canopy development was computed by comparing the area under curves (AUCs) of different VI time-series annually throughout the study period. Soil-Line VIs were compared to the Normalized Vegetation Index (NDVI) revealing that the Second Modified Chlorophyll Absorption Ratio Index (MCARI2) more clearly demonstrated canopy evolution tendencies over time than the NDVI. MCARI2 data from both L8 and S2 reflected how the influence of treatment on the canopy cover decreases over the years, providing significant differences in the thinning year and the year after. Metrics derived from the MCARI2 time-series also demonstrated the capacity of the canopy to recovery to pretreatment coverage levels. The AUC method generates a specific V-shaped time-signature, the vertex of which coincides with the thinning event and, as such, provides forest managers with another tool to assist decision making in the development of sustainable forest management strategies.


2020 ◽  
Vol 12 (8) ◽  
pp. 1275 ◽  
Author(s):  
Salvatore Falanga Bolognesi ◽  
Edoardo Pasolli ◽  
Oscar Belfiore ◽  
Carlo De Michele ◽  
Guido D’Urso

Lack of accurate and up-to-date data associated with irrigated areas and related irrigation amounts is hampering the full implementation and compliance of the Water Framework Directive (WFD). In this paper, we describe the framework that we developed and implemented within the DIANA project to map the actual extent of irrigated areas in the Campania region (Southern Italy) during the 2018 irrigation season. For this purpose, we considered 202 images from the Harmonized Landsat Sentinel-2 (HLS) products (57 images from Landsat 8 and 145 images from Sentinel-2). Such data were preprocessed in order to extract a multitemporal Normalized Difference Vegetation Index (NDVI) map, which was then smoothed through a gap-filling algorithm. We further integrated data coming from high-resolution (4 km) global satellite precipitation Precipitation Estimation from Remotely Sensed Information using Artificial Neural Networks (PERSIANN)-Cloud Classification System (CCS) products. We collected an extensive ground truth in the field represented by 2992 data points coming from three main thematic classes: bare soil and rainfed (class 0), herbaceous (class 1), and tree crop (class 2). This information was exploited to generate irrigated area maps by adopting a machine learning classification approach. We compared six different types of classifiers through a cross-validation approach and found that, in general, random forests, support vector machines, and boosted decision trees exhibited the best performances in terms of classification accuracy and robustness to different tested scenarios. We found an overall accuracy close to 90% in discriminating among the three thematic classes, which highlighted promising capabilities in the detection of irrigated areas from HLS products.


2019 ◽  
Vol 11 (14) ◽  
pp. 1683 ◽  
Author(s):  
Yangchengsi Zhang ◽  
Long Guo ◽  
Yiyun Chen ◽  
Tiezhu Shi ◽  
Mei Luo ◽  
...  

High-precision maps of soil organic carbon (SOC) are beneficial for managing soil fertility and understanding the global carbon cycle. Digital soil mapping plays an important role in efficiently obtaining the spatial distribution of SOC, which contributes to precision agriculture. However, traditional soil-forming factors (i.e., terrain or climatic factors) have weak variability in low-relief areas, such as plains, and cannot reflect the spatial variation of soil attributes. Meanwhile, vegetation cover hinders the acquisition of the direct information of farmland soil. Thus, useful environmental variables should be utilized for SOC prediction and the digital mapping of such areas. SOC has an important effect on crop growth status, and remote sensing data can record the apparent spectral characteristics of crops. The normalized difference vegetation index (NDVI) is an important index reflecting crop growth and biomass. This study used NDVI time series data rather than traditional soil-forming factors to map SOC. Honghu City, located in the middle of the Jianghan Plain, was selected as the study region, and the NDVI time series data extracted from Landsat 8 were used as the auxiliary variables. SOC maps were estimated through stepwise linear regression (SLR), partial least squares regression (PLSR), support vector machine (SVM), and artificial neural network (ANN). Ordinary kriging (OK) was used as the reference model, while root mean square error of prediction (RMSEP) and coefficient of determination of prediction (R2P) were used to evaluate the model performance. Results showed that SOC had a significant positive correlation in July and August (0.17, 0.29) and a significant negative correlation in January, April, and December (−0.23, −0.27, and −0.23) with NDVI time series data. The best model for SOC prediction was generated by ANN, with the lowest RMSEP of 3.718 and highest R2P of 0.391, followed by SVM (RMSEP = 3.753, R2P = 0.361) and PLSR (RMSEP = 4.087, R2P = 0.283). The SLR model was the worst model, with the lowest R2P of 0.281 and highest RMSEP of 3.930. ANN and SVM were better than OK (RMSEP = 3.727, R2P = 0.372), whereas PLSR and SLR were worse than OK. Moreover, the prediction results using single-data NDVI or short time series NDVI showed low accuracy. The effect of the terrain factor on SOC prediction represented unsatisfactory results. All these results indicated that the NDVI time series data can be used for SOC mapping in plain areas and that the ANN model can maximally extract additional associated information between NDVI time series data and SOC. This study presented an effective method to overcome the selection of auxiliary variables for digital soil mapping in plain areas when the soil was covered with vegetation. This finding indicated that the time series characteristics of NDVI were conducive for predicting SOC in plains.


2021 ◽  
Author(s):  
Valentin Buck ◽  
Flemming Stäbler ◽  
Everardo Gonzalez ◽  
Jens Greinert

<p>The study of the earth’s systems depends on a large amount of observations from homogeneous sources, which are usually scattered around time and space and are tightly intercorrelated to each other. The understanding of said systems depends on the ability to access diverse data types and contextualize them in a global setting suitable for their exploration. While the collection of environmental data has seen an enormous increase over the last couple of decades, the development of software solutions necessary to integrate observations across disciplines seems to be lagging behind. To deal with this issue, we developed the Digital Earth Viewer: a new program to access, combine, and display geospatial data from multiple sources over time.</p><p>Choosing a new approach, the software displays space in true 3D and treats time and time ranges as true dimensions. This allows users to navigate observations across spatio-temporal scales and combine data sources with each other as well as with meta-properties such as quality flags. In this way, the Digital Earth Viewer supports the generation of insight from data and the identification of observational gaps across compartments.</p><p>Developed as a hybrid application, it may be used both in-situ as a local installation to explore and contextualize new data, as well as in a hosted context to present curated data to a wider audience.</p><p>In this work, we present this software to the community, show its strengths and weaknesses, give insight into the development process and talk about extending and adapting the software to custom usecases.</p>


2020 ◽  
Vol 12 (19) ◽  
pp. 3120
Author(s):  
Luojia Hu ◽  
Nan Xu ◽  
Jian Liang ◽  
Zhichao Li ◽  
Luzhen Chen ◽  
...  

A high resolution mangrove map (e.g., 10-m), including mangrove patches with small size, is urgently needed for mangrove protection and ecosystem function estimation, because more small mangrove patches have disappeared with influence of human disturbance and sea-level rise. However, recent national-scale mangrove forest maps are mainly derived from 30-m Landsat imagery, and their spatial resolution is relatively coarse to accurately characterize the extent of mangroves, especially those with small size. Now, Sentinel imagery with 10-m resolution provides an opportunity for generating high-resolution mangrove maps containing these small mangrove patches. Here, we used spectral/backscatter-temporal variability metrics (quantiles) derived from Sentinel-1 SAR (Synthetic Aperture Radar) and/or Sentinel-2 MSI (Multispectral Instrument) time-series imagery as input features of random forest to classify mangroves in China. We found that Sentinel-2 (F1-Score of 0.895) is more effective than Sentinel-1 (F1-score of 0.88) in mangrove extraction, and a combination of SAR and MSI imagery can get the best accuracy (F1-score of 0.94). The 10-m mangrove map was derived by combining SAR and MSI data, which identified 20003 ha mangroves in China, and the area of small mangrove patches (<1 ha) is 1741 ha, occupying 8.7% of the whole mangrove area. At the province level, Guangdong has the largest area (819 ha) of small mangrove patches, and in Fujian, the percentage of small mangrove patches is the highest (11.4%). A comparison with existing 30-m mangrove products showed noticeable disagreement, indicating the necessity for generating mangrove extent product with 10-m resolution. This study demonstrates the significant potential of using Sentinel-1 and Sentinel-2 images to produce an accurate and high-resolution mangrove forest map with Google Earth Engine (GEE). The mangrove forest map is expected to provide critical information to conservation managers, scientists, and other stakeholders in monitoring the dynamics of the mangrove forest.


Sign in / Sign up

Export Citation Format

Share Document