scholarly journals BeiDou-Based Passive Radar Vessel Target Detection: Method and Experiment via Long-Time Optimized Integration

2021 ◽  
Vol 13 (19) ◽  
pp. 3933
Author(s):  
Chuan Huang ◽  
Zhongyu Li ◽  
Mingyue Lou ◽  
Xingye Qiu ◽  
Hongyang An ◽  
...  
Keyword(s):  
Target Detection ◽  
Optimization Problem ◽  
Time Integration ◽  
Satellite System ◽  
Observation Time ◽  
Detection Performance ◽  
Passive Radar ◽  
Power Budget ◽  
Long Time ◽  
Range Migration

The BeiDou navigation satellite system shows its potential for passive radar vessel target detection owing to its global-scale coverage. However, the restrained power budget from BeiDou satellite hampers the detection performance. To solve this limitation, this paper proposes a long-time optimized integration method to obtain an adequate signal-to-noise ratio (SNR). During the long observation time, the range migration, intricate Doppler migration, and noncoherence characteristic bring challenges to the integration processing. In this paper, first, the keystone transform is applied to correct the range walk. Then, considering the noncoherence of the entire echo, the hybrid integration strategy is adopted. To remove the Doppler migration and correct the residual range migration, the long-time integration is modeled as an optimization problem. Finally, the particle swarm optimization (PSO) algorithm is applied to solve the optimization problem, after which the target echo over the long observation time is well concentrated, providing a reliable detection performance for the BeiDou-based passive radar. Its effectiveness is shown by the simulated and experimental results.

scholarly journals Clutter Cancellation and Long Time Integration for GNSS-Based Passive Bistatic Radar

2021 ◽  
Vol 13 (4) ◽  
pp. 701 ◽  
Author(s):  
Binbin Wang ◽  
Hao Cha ◽  
Zibo Zhou ◽  
Bin Tian
Keyword(s):  
Fourier Transform ◽  
Target Detection ◽  
Time Integration ◽  
Detection Performance ◽  
Bistatic Radar ◽  
Detection Range ◽  
Robust Detection ◽  
Coherent Integration ◽  
Long Time ◽  
Long Time Integration

Clutter cancellation and long time integration are two vital steps for global navigation satellite system (GNSS)-based bistatic radar target detection. The former eliminates the influence of direct and multipath signals on the target detection performance, and the latter improves the radar detection range. In this paper, the extensive cancellation algorithm (ECA), which projects the surveillance channel signal in the subspace orthogonal to the clutter subspace, is first applied in GNSS-based bistatic radar. As a result, the clutter has been removed from the surveillance channel effectively. For long time integration, a modified version of the Fourier transform (FT), called long-time integration Fourier transform (LIFT), is proposed to obtain a high coherent processing gain. Relative acceleration (RA) is defined to describe the Doppler variation results from the motion of the target and long integration time. With the estimated RA, the Doppler frequency shift compensation is carried out in the LIFT. This method achieves a better and robust detection performance when comparing with the traditional coherent integration method. The simulation results demonstrate the effectiveness and advantages of the proposed processing method.

scholarly journals Fast Implementation of Insect Multi-Target Detection Based on Multimodal Optimization

2021 ◽  
Vol 13 (4) ◽  
pp. 594
Author(s):  
Rui Wang ◽  
Yiming Zhang ◽  
Weiming Tian ◽  
Jiong Cai ◽  
Cheng Hu ◽  
...  
Keyword(s):  
Target Detection ◽  
Computational Cost ◽  
Detection Performance ◽  
Coherent Detection ◽  
Observation Data ◽  
Multimodal Optimization ◽  
Performance Simulation ◽  
Single Target ◽  
Parameter Search ◽  
Long Time

Entomological radars are important for scientific research of insect migration and early warning of migratory pests. However, insects are hard to detect because of their tiny size and highly maneuvering trajectory. Generalized Radon–Fourier transform (GRFT) has been proposed for effective weak maneuvering target detection by long-time coherent detection via jointly motion parameter search, but the heavy computational burden makes it impractical in real signal processing. Particle swarm optimization (PSO) has been used to achieve GRFT detection by fast heuristic parameter search, but it suffers from obvious detection probability loss and is only suitable for single target detection. In this paper, we convert the realization of GRFT into a multimodal optimization problem for insect multi-target detection. A novel niching method without radius parameter is proposed to detect unevenly distributed insect targets. Species reset and boundary constraint strategy are used to improve the detection performance. Simulation analyses of detection performance and computational cost are given to prove the effectiveness of the proposed method. Furthermore, real observation data acquired from a Ku-band entomological radar is used to test this method. The results show that it has better performance on detected target amount and track continuity in insect multi-target detection.

scholarly journals Robust Weighted l1,2 Norm Filtering in Passive Radar Systems

Sensors ◽  
2020 ◽  
Vol 20 (11) ◽  
pp. 3270 ◽  
Author(s):  
Baris Satar ◽  
Gokhan Soysal ◽  
Xue Jiang ◽  
Murat Efe ◽  
Thiagalingam Kirubarajan
Keyword(s):  
Target Detection ◽  
Impulsive Noise ◽  
Simulated Data ◽  
Real Data ◽  
Detection Performance ◽  
Passive Radar ◽  
Mobile Telecommunication ◽  
Telecommunication System ◽  
Conventional Methods ◽  
Non Gaussian

Conventional methods such as matched filtering, fractional lower order statistics cross ambiguity function, and recent methods such as compressed sensing and track-before-detect are used for target detection by passive radars. Target detection using these algorithms usually assumes that the background noise is Gaussian. However, non-Gaussian impulsive noise is inherent in real world radar problems. In this paper, a new optimization based algorithm that uses weighted l 1 and l 2 norms is proposed as an alternative to the existing algorithms whose performance degrades in the presence of impulsive noise. To determine the weights of these norms, the parameter that quantifies the impulsiveness level of the noise is estimated. In the proposed algorithm, the aim is to increase the target detection performance of a universal mobile telecommunication system (UMTS) based passive radars by facilitating higher resolution with better suppression of the sidelobes in both range and Doppler. The results obtained from both simulated data with α stable distribution, and real data recorded by a UMTS based passive radar platform are presented to demonstrate the superiority of the proposed algorithm. The results show that the proposed algorithm provides more robust and accurate detection performance for noise models with different impulsiveness levels compared to the conventional methods.

scholarly journals Moving Target Detection in Multi-Static GNSS-Based Passive Radar Based on Multi-Bernoulli Filter

2020 ◽  
Vol 12 (21) ◽  
pp. 3495
Author(s):  
HongCheng Zeng ◽  
Jie Chen ◽  
PengBo Wang ◽  
Wei Liu ◽  
XinKai Zhou ◽  
...  
Keyword(s):  
Target Detection ◽  
Sequential Monte Carlo ◽  
Signal To Noise Ratio ◽  
Power Level ◽  
Estimation Method ◽  
Satellite System ◽  
Moving Target ◽  
Passive Radar ◽  
Moving Target Detection ◽  
Global Navigation Satellite

Over the past few years, the global navigation satellite system (GNSS)-based passive radar (GBPR) has attracted more and more attention and has developed very quickly. However, the low power level of GNSS signal limits its application. To enhance the ability of moving target detection, a multi-static GBPR (MsGBPR) system is considered in this paper, and a modified iterated-corrector multi-Bernoulli (ICMB) filter is also proposed. The likelihood ratio model of the MsGBPR with range-Doppler map is first presented. Then, a signal-to-noise ratio (SNR) online estimation method is proposed, which can estimate the fluctuating and unknown map SNR effectively. After that, a modified ICMB filter and its sequential Monte Carlo (SMC) implementation are proposed, which can update all measurements from multi-transmitters in the optimum order (ascending order). Moreover, based on the proposed method, a moving target detecting framework using MsGBPR data is also presented. Finally, performance of the proposed method is demonstrated by numerical simulations and preliminary experimental results, and it is shown that the position and velocity of the moving target can be estimated accurately.

scholarly journals Experimental Demonstration of Ship Target Detection in GNSS-Based Passive Radar Combining Target Motion Compensation and Track-before-Detect Strategies

Sensors ◽  
2020 ◽  
Vol 20 (3) ◽  
pp. 599 ◽  
Author(s):  
Fabrizio Santi ◽  
Debora Pastina ◽  
Marta Bucciarelli
Keyword(s):  
Motion Compensation ◽  
Time Integration ◽  
Practical Interest ◽  
Target Motion ◽  
Experimental Results ◽  
Passive Radar ◽  
Motion Models ◽  
Long Time ◽  
Long Time Integration ◽  
Track Before Detect

This work discusses methods and experimental results on passive radar detection of moving ships using navigation satellites as transmitters of opportunity. The reported study highlights as the adoption of proper strategies combining target motion compensation and track-before-detect methods to achieve long time integration can be fruitfully exploited in GNSS-based passive radar for the detection of maritime targets. The proposed detection strategy reduces the sensitivity of long-time integration methods to the adopted motion models and can save the computational complexity, making it appealing for real-time implementations. Experimental results obtained in three different scenarios (port operations, navigation in open area, and river shipping) comprising maritime targets belonging to different classes show as this combined approach can be employed with success in several operative scenarios of practical interest for this technology.

scholarly journals 2-D Coherent Integration Processing and Detecting of Aircrafts Using GNSS-Based Passive Radar

2018 ◽  
Vol 10 (7) ◽  
pp. 1164 ◽  
Author(s):  
Hong-Cheng Zeng ◽  
Jie Chen ◽  
Peng-Bo Wang ◽  
Wei Yang ◽  
Wei Liu
Keyword(s):  
Matched Filter ◽  
Power Level ◽  
Doppler Frequency ◽  
Satellite System ◽  
Passive Radar ◽  
Match Filter ◽  
Coherent Integration ◽  
Long Time ◽  
Global Navigation Satellite ◽  
Aircraft Detection

Long time coherent integration is a vital method for improving the detection ability of global navigation satellite system (GNSS)-based passive radar, because the GNSS signal is not radar-designed and its power level is very low. For aircraft detection, the large range cell migration (RCM) and Doppler frequency migration (DFM) will seriously affect the coherent processing of azimuth signals, and the traditional range match filter will also be mismatched due to the Doppler-intolerant characteristic of GNSS signals. Accordingly, the energy loss of 2-dimensional (2-D) coherent processing is inevitable in traditional methods. In this paper, a novel 2-D coherent integration processing and algorithm for aircraft target detection is proposed. For azimuth processing, a modified Radon Fourier Transform (RFT) with range-walk removal and Doppler rate estimation is performed. In respect to range compression, a modified matched filter with a shifting Doppler is applied. As a result, the signal will be accurately focused in the range-Doppler domain, and a sufficiently high SNR can be obtained for aircraft detection with a moving target detector. Numerical simulations demonstrate that the range-Doppler parameters of an aircraft target can be obtained, and the position and velocity of the aircraft can be estimated accurately by multiple observation geometries due to abundant GNSS resources. The experimental results also illustrate that the blind Doppler sidelobe is suppressed effectively and the proposed algorithm has a good performance even in the presence of Doppler ambiguity.

Sign in / Sign up

Export Citation Format

Share Document