scholarly journals Numerical Sensing of Plastic Hinge Regions in Concrete Beams with Hybrid (FRP and Steel) Bars

Sensors ◽  
2018 ◽  
Vol 18 (10) ◽  
pp. 3255 ◽  
Author(s):  
Fang Yuan ◽  
Mengcheng Chen
Keyword(s):  
Finite Element ◽  
Reinforced Concrete ◽  
Concrete Beams ◽  
Plastic Hinge ◽  
Reinforcement Ratio ◽  
Reinforced Concrete Beams ◽  
Concrete Members ◽  
Steel Bars ◽  
Hybrid Reinforcement ◽  
Steel Hardening

Fibre-reinforced polymer (FRP)-reinforced concrete members exhibit low ductility due to the linear-elastic behaviour of FRP materials. Concrete members reinforced by hybrid FRP–steel bars can improve strength and ductility simultaneously. In this study, the plastic hinge problem of hybrid FRP–steel reinforced concrete beams was numerically assessed through finite element analysis (FEA). Firstly, a finite element model was proposed to validate the numerical method by comparing the simulation results with the test results. Then, three plastic hinge regions—the rebar yielding zone, concrete crushing zone, and curvature localisation zone—of the hybrid reinforced concrete beams were analysed in detail. Finally, the effects of the main parameters, including the beam aspect ratio, concrete grade, steel yield strength, steel reinforcement ratio, steel hardening modulus, and FRP elastic modulus on the lengths of the three plastic zones, were systematically evaluated through parametric studies. It is determined that the hybrid reinforcement ratio exerts a significant effect on the plastic hinge lengths. The larger the hybrid reinforcement ratio, the larger is the extent of the rebar yielding zone and curvature localisation zone. It is also determined that the beam aspect ratio, concrete compressive strength, and steel hardening ratio exert significant positive effects on the length of the rebar yielding zone.

scholarly journals Ductility Estimation of Concrete Beams Longitudinally Reinforced with Hybrid FRP-Steel Bars

2022 ◽  
Author(s):  
Rendy Thamrin ◽  
Zaidir Zaidir ◽  
Devitasari Iwanda
Keyword(s):  
Reinforced Concrete ◽  
Concrete Beams ◽  
Element Model ◽  
Neutral Axis ◽  
Reinforced Concrete Beams ◽  
Flexural Behavior ◽  
Bending Test ◽  
Longitudinal Reinforcement ◽  
Steel Bars ◽  
Hybrid Reinforcement

An experimental study was carried out to evaluate the ductility of reinforced concrete beams longitudinally reinforced with hybrid FRP-Steel bars. The specimens were fourteen reinforced concrete beams with and without hybrid reinforcement. The test variables were bars position, the ratio of longitudinal reinforcement, and the type of FRP bars. The beams were loaded up to failure using a four-point bending test. The performance of the tested beams was observed using the load-deflection curve obtained from the test. Numerical analysis using the fiber element model was used to examine the growth of neutral axis depth due to the effect of test variables. The neutral axis curves were then used to further estimate the neutral axis angle and neutral axis displacement index. The test results show that the position of the reinforcement greatly influences the flexural behavior of the beam with hybrid reinforcement. It was observed from the test that the flexural capacity of beams with hybrid reinforcement is 4% to 50% higher than that of the beams with conventional steel bars depending on bars position and the ratio of longitudinal reinforcement. The ductility decreases as the hybrid reinforcement ratio (Af/As) increases. This study also showed that a numerical model developed can predict the flexural behavior of beams with hybrid reinforcement with reasonable accuracy.

scholarly journals Influence of tensile softening of concrete on crack development and failure in concrete and reinforced concrete beams

2019 ◽  
Vol 68 (1) ◽  
pp. 213-223 ◽  
Author(s):  
Marta Słowik
Keyword(s):  
Reinforced Concrete ◽  
Concrete Beams ◽  
Load Capacity ◽  
Plain Concrete ◽  
Reinforcement Ratio ◽  
Reinforced Concrete Beams ◽  
Test Results ◽  
Concrete Members ◽  
Cracking Process ◽  
Tensile Softening

In the paper, the own test results were presented. The experimental investigation was focused at determining the cracking and load capacity of beams made of concrete. The beams were characterized by different longitudinal reinforcement ratio from zero — plain concrete beams, through low ratio 0.12% — slightly reinforced concrete beams, middle ratio 0.9% — typical reinforced concrete beams, up to the ratios 1.3% and 1.8% — higher reinforced concrete beams. On the basis of the performed experiments and the results of numerical calculations, the process of crack’s formation and crack’s development in plain concrete, slightly reinforced concrete and reinforced concrete beams with different reinforcement ratio was described. When discussing cracking process in the beams, the contribution of strain softening of tensile concrete in the microcracked zone on the character of beams’ failure was analysed as well. Keywords: civil engineering, concrete and reinforced concrete members, cracking and load capacity.

scholarly journals The analysis of load carrying capacity and cracking of slightly reinforced concrete members in bending

2008 ◽  
Vol 2 (1) ◽  
pp. 065-078
Author(s):  
Marta Słowik
Keyword(s):  
Reinforced Concrete ◽  
Carrying Capacity ◽  
Concrete Beams ◽  
Plain Concrete ◽  
Reinforcement Ratio ◽  
Reinforced Concrete Beams ◽  
Load Carrying Capacity ◽  
Test Results ◽  
Concrete Members ◽  
Load Carrying

Slightly reinforced concrete members are the members made by concrete with reinforcement less than minimum given in codes for reinforced concrete ones. Plain concrete and slightly reinforced concrete members in bending are treated in the same way during the dimensioning and the influence of longitudinal reinforcement on the load carrying capacity is not taken into account. The mechanism of work and crack formation in slightly reinforced concrete members is not completely recognized. The author’s own research program was made. The experiment was aimed at the determination of cracking moment and load carrying capacity of slightly reinforced concrete beams with different reinforcement ratio. Also plain concrete beams and the typical reinforced concrete beam were tested. The analysis of the obtained values of maximum bending moment and crack’s widths was made according to the reinforcement ratio. The analysis of test results shows how the presence of longitudinal steel bars in concrete members, even when reinforcement ratio is low, changes cracking process and influences the value of cracking moment in flexural members. On the basis of test results, the method how to calculate the load carrying capacity of slightly reinforced concrete elements in bending has been proposed.

scholarly journals Behavior of Reinforced Concrete Plates under Pure Torsion

2021 ◽  
Vol 28 (1) ◽  
pp. 84-97
Author(s):  
Omer Ibraheem ◽  
Osama Mukhlif
Keyword(s):  
Reinforced Concrete ◽  
Concrete Beams ◽  
Reinforcement Ratio ◽  
Reinforced Concrete Beams ◽  
Torsional Loading ◽  
Pure Torsion ◽  
Size Change ◽  
Concrete Members ◽  
Strength Capacity ◽  
Concrete Plates

The behavior of reinforced concrete members under torsional loading has interested many researchers during the last decades. These researches focused mainly on the response of reinforced concrete beams at different reinforcement conditions and the size effects. On the other hand, the behavior of concrete plates or slabs has not been investigated clearly under pure and/or combined torsional loading. In the present study, nine reinforced concrete plates were prepared and tested under pure torsion. Effect of steel reinforcement ratio and size change was studied and they have a great effect on the plated strength, capacity, stiffness and ductility. As stated by torsion theories of reinforced concrete beams, the torsional strength of slabs was upgraded also with increasing in cross section and transverse reinforcement ratio.

Finite Element Analysis of Reinforced Concrete Beams with Exterior FRP Shell

2011 ◽  
Vol 243-249 ◽  
pp. 1461-1465
Author(s):  
Chuan Min Zhang ◽  
Chao He Chen ◽  
Ye Fan Chen
Keyword(s):  
Mechanical Properties ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Reinforced Concrete ◽  
Concrete Beams ◽  
Reinforced Concrete Beams ◽  
Test Results ◽  
Contact Interface ◽  
Accurate Calculation ◽  
Element Analysis

The paper makes an analysis of the reinforced concrete beams with exterior FRP Shell in Finite Element, and compares it with the test results. The results show that, by means of this model, mechanical properties of reinforced concrete beams with exterior FRP shell can be predicted better. However, the larger the load, the larger deviation between calculated values and test values. Hence, if more accurate calculation is required, issues of contact interface between the reinforced concrete beams and the FRP shell should be taken into consideration.

Sign in / Sign up

Export Citation Format

Share Document