scholarly journals A Novel Passive Indoor Localization Method by Fusion CSI Amplitude and Phase Information

Sensors ◽  
2019 ◽  
Vol 19 (4) ◽  
pp. 875 ◽  
Author(s):  
Xiaochao Dang ◽  
Xiong Si ◽  
Zhanjun Hao ◽  
Yaning Huang
Keyword(s):  
Indoor Localization ◽  
Rapid Development ◽  
Location Based Services ◽  
Signal Interference ◽  
Indoor Environments ◽  
Phase Information ◽  
Localization Accuracy ◽  
Localization Method ◽  
Indoor Location ◽  
Conference Room

With the rapid development of wireless network technology, wireless passive indoor localization has become an increasingly important technique that is widely used in indoor location-based services. Channel state information (CSI) can provide more detailed and specific subcarrier information, which has gained the attention of researchers and has become an emphasis in indoor localization technology. However, existing research has generally adopted amplitude information for eigenvalue calculations. There are few research studies that have used phase information from CSI signals for localization purposes. To eliminate the signal interference existing in indoor environments, we present a passive human indoor localization method named FapFi, which fuses CSI amplitude and phase information to fully utilize richer signal characteristics to find location. In the offline stage, we filter out redundant values and outliers in the CSI amplitude information and then process the CSI phase information. A fusion method is utilized to store the processed amplitude and phase information as a fingerprint database. The experimental data from two typical laboratory and conference room environments were gathered and analyzed. The extensive experimental results demonstrate that the proposed algorithm is more efficient than other algorithms in data processing and achieves decimeter-level localization accuracy.

scholarly journals Enhance RSS-Based Indoor Localization Accuracy by Leveraging Environmental Physical Features

2018 ◽  
Vol 2018 ◽  
pp. 1-8 ◽  
Author(s):  
Peng Xiang ◽  
Peng Ji ◽  
Dian Zhang
Keyword(s):  
Indoor Localization ◽  
Radio Signal ◽  
Signal Strength ◽  
Indoor Environments ◽  
Wireless Devices ◽  
Positioning Accuracy ◽  
Localization Accuracy ◽  
Localization Method ◽  
Physical Features ◽  
Additional Hardware

Indoor localization technologies based on Radio Signal Strength (RSS) attract many researchers’ attentions, since RSS can be easily obtained by wireless devices without additional hardware. However, such technologies are apt to be affected by indoor environments and multipath phenomenon. Thus, the accuracy is very difficult to improve. In this paper, we put forward a method, which is able to leverage various other resources in localization. Besides the traditional RSS information, the environmental physical features, e.g., the light, temperature, and humidity information, are all utilized for localization. After building a comprehensive fingerprint map for the above information, we propose an algorithm to localize the target based on Naïve Bayesian. Experimental results show that the successful positioning accuracy can dramatically outperform traditional pure RSS-based indoor localization method by about 39%. Our method has the potential to improve all the radio frequency (RF) based localization approaches.

scholarly journals Indoor Localization Based on Fingerprint Clustering

2020 ◽  
Vol 5 (2) ◽  
pp. 40
Author(s):  
Shi Chen
Keyword(s):  
Nearest Neighbor ◽  
Indoor Localization ◽  
Rapid Development ◽  
Computational Cost ◽  
Gaussian Model ◽  
Location Based Services ◽  
Indoor Environments ◽  
Localization Error ◽  
Localization Algorithm ◽  
K Nearest Neighbor

With the rapid development of the huge promotion of the Internet and artificial intelligence, the demand for location-based services in indoor environments has grown rapidly. At present, for the localization of the indoor environment, researchers from all walks of life have proposed many indoor localization solutions based on different technologies. Fingerprint localization technology, as a commonly used indoor localization technology, has led to continuous research and improvement due to its low accuracy and complex calculations. An indoor localization system based on fingerprint clustering is proposed by this paper. The system includes offline phase and online phase. We collect the RSS signal in the offline phase. We preprocess it with the Gaussian model to build a fingerprint database, and then we use the K-Means++ algorithm to cluster the fingerprints and group the fingerprints with similar signal strengths into a clustering subset. In the online phase, we classify the measured received signal strength (RSS), and then use the weighted K-Nearest neighbor (WKNN) algorithm to calculate the localization error. The experimental results show that we can reduce the localization error and effectively reduce the computational cost of the localization algorithm in the online phase, and effectively improve the efficiency of real-time localization in the online phase.

scholarly journals RETHINKING INDOOR LOCALIZATION SOLUTIONS TOWARDS THE FUTURE OF MOBILE LOCATION-BASED SERVICES

2017 ◽  
Vol IV-4/W4 ◽  
pp. 235-247 ◽  
Author(s):  
C. Guney
Keyword(s):  
Indoor Localization ◽  
Smart Cities ◽  
Indoor Navigation ◽  
Location Based Services ◽  
Outdoor Environment ◽  
Indoor Environments ◽  
Navigation Systems ◽  
Positioning Systems ◽  
Indoor Location ◽  
High Level

Satellite navigation systems with GNSS-enabled devices, such as smartphones, car navigation systems, have changed the way users travel in outdoor environment. GNSS is generally not well suited for indoor location and navigation because of two reasons: First, GNSS does not provide a high level of accuracy although indoor applications need higher accuracies. Secondly, poor coverage of satellite signals for indoor environments decreases its accuracy. So rather than using GNSS satellites within closed environments, existing indoor navigation solutions rely heavily on installed sensor networks. There is a high demand for accurate positioning in wireless networks in GNSS-denied environments. However, current wireless indoor positioning systems cannot satisfy the challenging needs of indoor location-aware applications. Nevertheless, access to a user’s location indoors is increasingly important in the development of context-aware applications that increases business efficiency. In this study, how can the current wireless location sensing systems be tailored and integrated for specific applications, like smart cities/grids/buildings/cars and IoT applications, in GNSS-deprived areas.

SiFi

2021 ◽  
Vol 2 (3) ◽  
pp. 1-21
Author(s):  
Deke Guo ◽  
Xiaoqiang Teng ◽  
Yulan Guo ◽  
Xiaolei Zhou ◽  
Zhong Liu
Keyword(s):  
Rapid Development ◽  
Estimation Method ◽  
Likelihood Estimation ◽  
Location Based Services ◽  
Shopping Mall ◽  
Inference Problem ◽  
Indoor Location ◽  
Label Semantics ◽  
Geometrical Constraints ◽  
Indoor Scenes

Due to the rapid development of indoor location-based services, automatically deriving an indoor semantic floorplan becomes a highly promising technique for ubiquitous applications. To make an indoor semantic floorplan fully practical, it is essential to handle the dynamics of semantic information. Despite several methods proposed for automatic construction and semantic labeling of indoor floorplans, this problem has not been well studied and remains open. In this article, we present a system called SiFi to provide accurate and automatic self-updating service. It updates semantics with instant videos acquired by mobile devices in indoor scenes. First, a crowdsourced-based task model is designed to attract users to contribute semantic-rich videos. Second, we use the maximum likelihood estimation method to solve the text inferring problem as the sequential relationship of texts provides additional geometrical constraints. Finally, we formulate the semantic update as an inference problem to accurately label semantics at correct locations on the indoor floorplans. Extensive experiments have been conducted across 9 weeks in a shopping mall with more than 250 stores. Experimental results show that SiFi achieves 84.5% accuracy of semantic update.

scholarly journals An Indoor Localization System Using Residual Learning with Channel State Information

Entropy ◽  
2021 ◽  
Vol 23 (5) ◽  
pp. 574
Author(s):  
Chendong Xu ◽  
Weigang Wang ◽  
Yunwei Zhang ◽  
Jie Qin ◽  
Shujuan Yu ◽  
...  
Keyword(s):  
Channel State Information ◽  
Indoor Environment ◽  
Indoor Localization ◽  
Location Based Services ◽  
Channel State ◽  
State Information ◽  
Localization Accuracy ◽  
Localization System ◽  
Increasing Demand ◽  
Degradation Problem

With the increasing demand of location-based services, neural network (NN)-based intelligent indoor localization has attracted great interest due to its high localization accuracy. However, deep NNs are usually affected by degradation and gradient vanishing. To fill this gap, we propose a novel indoor localization system, including denoising NN and residual network (ResNet), to predict the location of moving object by the channel state information (CSI). In the ResNet, to prevent overfitting, we replace all the residual blocks by the stochastic residual blocks. Specially, we explore the long-range stochastic shortcut connection (LRSSC) to solve the degradation problem and gradient vanishing. To obtain a large receptive field without losing information, we leverage the dilated convolution at the rear of the ResNet. Experimental results are presented to confirm that our system outperforms state-of-the-art methods in a representative indoor environment.

scholarly journals Privacy vs. Reward in Indoor Location-Based Services

2016 ◽  
Vol 2016 (4) ◽  
pp. 102-122 ◽  
Author(s):  
Kassem Fawaz ◽  
Kyu-Han Kim ◽  
Kang G. Shin
Keyword(s):  
Location Privacy ◽  
Indoor Localization ◽  
Service Providers ◽  
Location Based Services ◽  
Location Information ◽  
Privacy Concerns ◽  
Indoor Location ◽  
Location Data ◽  
Personalized Services ◽  
Privacy Risks

AbstractWith the advance of indoor localization technology, indoor location-based services (ILBS) are gaining popularity. They, however, accompany privacy concerns. ILBS providers track the users’ mobility to learn more about their behavior, and then provide them with improved and personalized services. Our survey of 200 individuals highlighted their concerns about this tracking for potential leakage of their personal/private traits, but also showed their willingness to accept reduced tracking for improved service. In this paper, we propose PR-LBS (Privacy vs. Reward for Location-Based Service), a system that addresses these seemingly conflicting requirements by balancing the users’ privacy concerns and the benefits of sharing location information in indoor location tracking environments. PR-LBS relies on a novel location-privacy criterion to quantify the privacy risks pertaining to sharing indoor location information. It also employs a repeated play model to ensure that the received service is proportionate to the privacy risk. We implement and evaluate PR-LBS extensively with various real-world user mobility traces. Results show that PR-LBS has low overhead, protects the users’ privacy, and makes a good tradeoff between the quality of service for the users and the utility of shared location data for service providers.

Improved SfM-Based Indoor Localization with Occlusion Removal

2018 ◽  
Vol 10 (3) ◽  
pp. 24-40
Author(s):  
Yushi Li ◽  
George Baciu ◽  
Yu Han ◽  
Chenhui Li
Keyword(s):  
Indoor Localization ◽  
Sparse Matrix ◽  
Matrix Decomposition ◽  
Low Rank ◽  
Data Sets ◽  
Indoor Environments ◽  
Decomposition Approach ◽  
Localization Accuracy ◽  
Occlusion Removal ◽  
Accuracy Increase

This article describes a novel 3D image-based indoor localization system integrated with an improved SfM (structure from motion) approach and an obstacle removal component. In contrast with existing state-of-the-art localization techniques focusing on static outdoor or indoor environments, the adverse effects, generated by moving obstacles in busy indoor spaces, are considered in this work. In particular, the problem of occlusion removal is converted into a separation problem of moving foreground and static background. A low-rank and sparse matrix decomposition approach is used to solve this problem efficiently. Moreover, a SfM with RT (re-triangulation) is adopted in order to handle the drifting problem of incremental SfM method in indoor scene reconstruction. To evaluate the performance of the system, three data sets and the corresponding query sets are established to simulate different states of the indoor environment. Quantitative experimental results demonstrate that both query registration rate and localization accuracy increase significantly after integrating the authors' improvements.

scholarly journals DeepLocate: Smartphone Based Indoor Localization with a Deep Neural Network Ensemble Classifier

Sensors ◽  
2019 ◽  
Vol 20 (1) ◽  
pp. 133 ◽  
Author(s):  
Imran Ashraf ◽  
Soojung Hur ◽  
Sangjoon Park ◽  
Yongwan Park
Keyword(s):  
Neural Network ◽  
Deep Neural Network ◽  
Indoor Localization ◽  
Ensemble Classifier ◽  
Location Based Services ◽  
Magnetic Data ◽  
Neural Network Ensemble ◽  
Localization Accuracy ◽  
Mean Error ◽  
The Impact

A quickly growing location-based services area has led to increased demand for indoor positioning and localization. Undoubtedly, Wi-Fi fingerprint-based localization is one of the promising indoor localization techniques, yet the variation of received signal strength is a major problem for accurate localization. Magnetic field-based localization has emerged as a new player and proved a potential indoor localization technology. However, one of its major limitations is degradation in localization accuracy when various smartphones are used. The localization performance is different from various smartphones even with the same localization technique. This research leverages the use of a deep neural network-based ensemble classifier to perform indoor localization with heterogeneous devices. The chief aim is to devise an approach that can achieve a similar localization accuracy using various smartphones. Features extracted from magnetic data of Galaxy S8 are fed into neural networks (NNs) for training. The experiments are performed with Galaxy S8, LG G6, LG G7, and Galaxy A8 smartphones to investigate the impact of device dependence on localization accuracy. Results demonstrate that NNs can play a significant role in mitigating the impact of device heterogeneity and increasing indoor localization accuracy. The proposed approach is able to achieve a localization accuracy of 2.64 m at 50% on four different devices. The mean error is 2.23 m, 2.52 m, 2.59 m, and 2.78 m for Galaxy S8, LG G6, LG G7, and Galaxy A8, respectively. Experiments on a publicly available magnetic dataset of Sony Xperia M2 using the proposed approach show a mean error of 2.84 m with a standard deviation of 2.24 m, while the error at 50% is 2.33 m. Furthermore, the impact of devices on various attitudes on the localization accuracy is investigated.

scholarly journals An Algorithm for Accurate and Robust Indoor Localization Based on Nonlinear Programming

Electronics ◽  
2020 ◽  
Vol 9 (1) ◽  
pp. 65 ◽  
Author(s):  
Stefania Monica ◽  
Federico Bergenti
Keyword(s):  
Nonlinear Programming ◽  
Mobile Devices ◽  
Optimization Problem ◽  
Indoor Localization ◽  
Wide Band ◽  
Location Based Services ◽  
Experimental Results ◽  
Indoor Environments ◽  
Anchor Nodes ◽  
The Impact

The study of techniques to estimate the position of mobile devices with a high level of accuracy and robustness is essential to provide advanced location based services in indoor environments. An algorithm to enable mobile devices to estimate their positions in known indoor environments is proposed in this paper under the assumption that fixed anchor nodes are available at known locations. The proposed algorithm is specifically designed to be executed on the mobile device whose position is under investigation, and it allows the device to estimate its position within the environment by actively measuring distance estimates from the anchor nodes. In order to reduce the impact of the errors caused by the arrangement of the anchor nodes in the environment, the proposed algorithm first transforms the localization problem into an optimization problem, and then, it solves the derived optimization problem using techniques inspired by nonlinear programming. Experimental results obtained using ultra-wide band signaling are presented to assess the performance of the algorithm and to compare it with reference alternatives. The presented experimental results confirm that the proposed algorithm provides an increased level of accuracy and robustness with respect to two reference alternatives, regardless of the position of the anchor nodes.

Sign in / Sign up

Export Citation Format

Share Document