scholarly journals Enhance RSS-Based Indoor Localization Accuracy by Leveraging Environmental Physical Features

2018 ◽  
Vol 2018 ◽  
pp. 1-8 ◽  
Author(s):  
Peng Xiang ◽  
Peng Ji ◽  
Dian Zhang
Keyword(s):  
Indoor Localization ◽  
Radio Signal ◽  
Signal Strength ◽  
Indoor Environments ◽  
Wireless Devices ◽  
Positioning Accuracy ◽  
Localization Accuracy ◽  
Localization Method ◽  
Physical Features ◽  
Additional Hardware

Indoor localization technologies based on Radio Signal Strength (RSS) attract many researchers’ attentions, since RSS can be easily obtained by wireless devices without additional hardware. However, such technologies are apt to be affected by indoor environments and multipath phenomenon. Thus, the accuracy is very difficult to improve. In this paper, we put forward a method, which is able to leverage various other resources in localization. Besides the traditional RSS information, the environmental physical features, e.g., the light, temperature, and humidity information, are all utilized for localization. After building a comprehensive fingerprint map for the above information, we propose an algorithm to localize the target based on Naïve Bayesian. Experimental results show that the successful positioning accuracy can dramatically outperform traditional pure RSS-based indoor localization method by about 39%. Our method has the potential to improve all the radio frequency (RF) based localization approaches.

scholarly journals A Novel Passive Indoor Localization Method by Fusion CSI Amplitude and Phase Information

Sensors ◽  
2019 ◽  
Vol 19 (4) ◽  
pp. 875 ◽  
Author(s):  
Xiaochao Dang ◽  
Xiong Si ◽  
Zhanjun Hao ◽  
Yaning Huang
Keyword(s):  
Indoor Localization ◽  
Rapid Development ◽  
Location Based Services ◽  
Signal Interference ◽  
Indoor Environments ◽  
Phase Information ◽  
Localization Accuracy ◽  
Localization Method ◽  
Indoor Location ◽  
Conference Room

With the rapid development of wireless network technology, wireless passive indoor localization has become an increasingly important technique that is widely used in indoor location-based services. Channel state information (CSI) can provide more detailed and specific subcarrier information, which has gained the attention of researchers and has become an emphasis in indoor localization technology. However, existing research has generally adopted amplitude information for eigenvalue calculations. There are few research studies that have used phase information from CSI signals for localization purposes. To eliminate the signal interference existing in indoor environments, we present a passive human indoor localization method named FapFi, which fuses CSI amplitude and phase information to fully utilize richer signal characteristics to find location. In the offline stage, we filter out redundant values and outliers in the CSI amplitude information and then process the CSI phase information. A fusion method is utilized to store the processed amplitude and phase information as a fingerprint database. The experimental data from two typical laboratory and conference room environments were gathered and analyzed. The extensive experimental results demonstrate that the proposed algorithm is more efficient than other algorithms in data processing and achieves decimeter-level localization accuracy.

Improved SfM-Based Indoor Localization with Occlusion Removal

2018 ◽  
Vol 10 (3) ◽  
pp. 24-40
Author(s):  
Yushi Li ◽  
George Baciu ◽  
Yu Han ◽  
Chenhui Li
Keyword(s):  
Indoor Localization ◽  
Sparse Matrix ◽  
Matrix Decomposition ◽  
Low Rank ◽  
Data Sets ◽  
Indoor Environments ◽  
Decomposition Approach ◽  
Localization Accuracy ◽  
Occlusion Removal ◽  
Accuracy Increase

This article describes a novel 3D image-based indoor localization system integrated with an improved SfM (structure from motion) approach and an obstacle removal component. In contrast with existing state-of-the-art localization techniques focusing on static outdoor or indoor environments, the adverse effects, generated by moving obstacles in busy indoor spaces, are considered in this work. In particular, the problem of occlusion removal is converted into a separation problem of moving foreground and static background. A low-rank and sparse matrix decomposition approach is used to solve this problem efficiently. Moreover, a SfM with RT (re-triangulation) is adopted in order to handle the drifting problem of incremental SfM method in indoor scene reconstruction. To evaluate the performance of the system, three data sets and the corresponding query sets are established to simulate different states of the indoor environment. Quantitative experimental results demonstrate that both query registration rate and localization accuracy increase significantly after integrating the authors' improvements.

scholarly journals Analysis of Received Signal Strength Quantization in Fingerprinting Localization

Sensors ◽  
2020 ◽  
Vol 20 (11) ◽  
pp. 3203 ◽  
Author(s):  
Syed Khandker ◽  
Joaquín Torres-Sospedra ◽  
Tapani Ristaniemi
Keyword(s):  
Quality Of Service ◽  
Indoor Localization ◽  
Signal Strength ◽  
Received Signal Strength ◽  
Storage Space ◽  
Data Traffic ◽  
Positioning Accuracy ◽  
Hardware Configuration ◽  
Fine Resolution

In recent times, Received Signal Strength (RSS)-based Wi-Fi fingerprinting localization has become one of the most promising techniques for indoor localization. The primary aim of RSS is to check the quality of the signal to determine the coverage and the quality of service. Therefore, fine-resolution RSS is needed, which is generally expressed by 1-dBm granularity. However, we found that, for fingerprinting localization, fine-granular RSS is unnecessary. A coarse-granular RSS can yield the same positioning accuracy. In this paper, we propose quantization for only the effective portion of the signal strength for fingerprinting localization. We found that, if a quantized RSS fingerprint can carry the major characteristics of a radio environment, it is sufficient for localization. Five publicly open fingerprinting databases with four different quantization strategies were used to evaluate the study. The proposed method can help to simplify the hardware configuration, enhance security, and save approximately 40–60% storage space and data traffic.

scholarly journals Accurate indoor positioning system based on modify nearest point technique

2022 ◽  
Vol 12 (2) ◽  
pp. 1593
Author(s):  
Omar Ibrahim Mustafa ◽  
Hawraa Lateef Joey ◽  
Noor Abd AlSalam ◽  
Ibrahim Zeghaiton Chaloob
Keyword(s):  
Indoor Localization ◽  
Signal Strength ◽  
Real Data ◽  
Reference Points ◽  
Positioning System ◽  
Indoor Environments ◽  
Nearest Point ◽  
The Impact ◽  
Indoor Positioning System

Wireless fidelity (Wi-Fi) is common technology for indoor environments that use to estimate required distances, to be used for indoor localization. Due to multiple source of noise and interference with other signal, the receive signal strength (RSS) measurements unstable. The impression about targets environments should be available to estimate accurate targets location. The Wi-Fi fingerprint technique is widely implemented to build database matching with real data, but the challenges are the way of collect accurate data to be the reference and the impact of different environments on signals measurements. In this paper, optimum system proposed based on modify nearest point (MNP). To implement the proposal, 78 points measured to be the reference points recorded in each environment around the targets. Also, the case study building is separated to 7 areas, where the segmentation of environments leads to ability of dynamic parameters assignments. Moreover, database based on optimum data collected at each time using 63 samples in each point and the average will be final measurements. Then, the nearest point into specific environment has been determined by compared with at least four points. The results show that the errors of indoor localization were less than (0.102 m).

scholarly journals A Two-Level WiFi Fingerprint-Based Indoor Localization Method for Dangerous Area Monitoring

Sensors ◽  
2019 ◽  
Vol 19 (19) ◽  
pp. 4243 ◽  
Author(s):  
Fei Li ◽  
Min Liu ◽  
Yue Zhang ◽  
Weiming Shen
Keyword(s):  
Indoor Localization ◽  
Search Space ◽  
High Accuracy ◽  
Cluster Center ◽  
Support Vector ◽  
Localization Accuracy ◽  
Localization Method ◽  
Fingerprint Database ◽  
Positioning Algorithm ◽  
Area Monitoring

Localization technologies play an important role in disaster management and emergence response. In areas where the environment does not change much after an accident or in the case of dangerous areas monitoring, indoor fingerprint-based localization can be used. In such scenarios, a positioning system needs to have both a high accuracy and a rapid response. However, these two requirements are usually conflicting since a fingerprint-based indoor localization system with high accuracy usually has complex algorithms and needs to process a large amount of data, and therefore has a slow response. This problem becomes even worse when both the size of monitoring area and the number of reference nodes increase. To address this challenging problem, this paper proposes a two-level positioning algorithm in order to improve both the accuracy and the response time. In the off-line stage, a fingerprint database is divided into several sub databases by using an affinity propagation clustering (APC) algorithm based on Shepard similarity. The online stage has two steps: (1) a coarse positioning algorithm is adopted to find the most similar sub database by matching the cluster center with the fingerprint of the node tested, which will narrow the search space and consequently save time; (2) in the sub database area, a support vector regression (SVR) algorithm with its parameters being optimized by particle swarm optimization (PSO) is used for fine positioning, thus improving the online positioning accuracy. Both experiment results and actual implementations proved that the proposed two-level localization method is more suitable than other methods in term of algorithm complexity, storage requirements and localization accuracy in dangerous area monitoring.

scholarly journals Localization with Transfer Learning Based on Fine-Grained Subcarrier Information for Dynamic Indoor Environments

Sensors ◽  
2021 ◽  
Vol 21 (3) ◽  
pp. 1015
Author(s):  
Yuqing Yin ◽  
Xu Yang ◽  
Peihao Li ◽  
Kaiwen Zhang ◽  
Pengpeng Chen ◽  
...  
Keyword(s):  
Transfer Learning ◽  
Bayesian Model Averaging ◽  
Indoor Localization ◽  
Domain Adaptation ◽  
Model Averaging ◽  
Indoor Environments ◽  
Test Bed ◽  
Localization Accuracy ◽  
Fine Grained ◽  
Multiple Domains

Indoor localization provides robust solutions in many applications, and Wi-Fi-based methods are considered some of the most promising means for optimizing indoor fingerprinting localization accuracy. However, Wi-Fi signals are vulnerable to environmental variations, resulting in data across different times being subjected to different distributions. To solve this problem, this paper proposes an across-time indoor localization solution based on channel state information (CSI) fingerprinting via multi-domain representations and transfer component analysis (TCA). We represent the format of CSI readings in multiple domains, extending the characterization of fine-grained information. TCA, a domain adaptation method in transfer learning, is applied to shorten the distribution distances among several CSI readings, which overcomes various CSI distribution problems at different time periods. Finally, we present a modified Bayesian model averaging approach to integrate the multi-domain outcomes and give the estimated positions. We conducted test-bed experiments in three scenarios on both personal computer (PC) and smartphone platforms in which the source and target fingerprinting data were collected across different days. The experimental results showed that our method outperforms state-of-the-art methods in localization accuracy.

scholarly journals SP-Loc: A crowdsourcing fingerprint based shop-level indoor localization algorithm integrating shop popularity without the indoor map

2018 ◽  
Vol 14 (11) ◽  
pp. 155014771881563 ◽  
Author(s):  
Jie Wei ◽  
Fang Zhao ◽  
Haiyong Luo
Keyword(s):  
Indoor Localization ◽  
Signal Strength ◽  
Received Signal Strength ◽  
Location Based Services ◽  
Shopping Mall ◽  
Time Stamp ◽  
Localization Algorithm ◽  
Variation Pattern ◽  
Localization Accuracy ◽  
User Location

With the development of indoor localization technology, the location-based services such as product advertising recommendation in the shopping mall attract widespread attention, as precise user location significantly improves the efficiency of advertising push and brings broader profits. However, most of the Wi-Fi-based indoor localization approaches requiring professionals to deploy expensive beacon devices and intensively collect fingerprints in each location grid, which severely limits its extensive promotion. We introduce a zero-cost indoor localization algorithm utilizing crowdsourcing fingerprints to obtain the shop recognition where the user is located. Naturally utilizing the Wi-Fi, GPS, and time-stamp fingerprints collected from the smartphone when user paid as the crowdsourcing fingerprint, we avoid the requirement for indoor map and get rid of both devices cost and manual signal collecting process. Moreover, a shop-level hierarchical indoor localization framework is proposed, and high robustness features based on Wi-Fi sequences variation pattern in the same shop analysis are designed to avoid the received signal strength fluctuations. Besides, we also pay more attention to mine the popularity properties of shops and explore GPS features to improve localization accuracy in the Wi-Fi absence situation effectively. Massive experiments indicate that SP-Loc achieves more than 93% localization accuracy.

scholarly journals The Indoor Localization of a Mobile Platform Based on Monocular Vision and Coding Images

2020 ◽  
Vol 9 (2) ◽  
pp. 122
Author(s):  
Fei Liu ◽  
Jixian Zhang ◽  
Jian Wang ◽  
Binghao Li
Keyword(s):  
Good Accuracy ◽  
Indoor Localization ◽  
Unit Weight ◽  
Indoor Environments ◽  
Mobile Platforms ◽  
Localization Accuracy ◽  
Indoor Space ◽  
Positioning Method ◽  
Spatial Coordinates ◽  
Development And Utilization

With the extensive development and utilization of urban underground space, coal mines, and other indoor areas, the indoor positioning technology of these areas has become a hot research topic. This paper proposes a robust localization method for indoor mobile platforms. Firstly, a series of coding graphics were designed for localizing the platform, and the spatial coordinates of these coding graphics were calculated by using a new method proposed in this paper. Secondly, two spatial resection models were constructed based on unit weight and Tukey weight to localize the platform in indoor environments. Lastly, the experimental results show that both models can calculate the position of the platform with good accuracy. The space resection model based on Tukey weight correctly identified the residuals of the observations for calculating the weights to obtain robust positioning results and has a high positioning accuracy. The navigation and positioning method proposed in this study has a high localization accuracy and can be potentially used in localizing practical indoor space mobile platforms.

scholarly journals Dealing with Insufficient Location Fingerprints in Wi-Fi Based Indoor Location Fingerprinting

2017 ◽  
Vol 2017 ◽  
pp. 1-11 ◽  
Author(s):  
Kai Dong ◽  
Zhen Ling ◽  
Xiangyu Xia ◽  
Haibo Ye ◽  
Wenjia Wu ◽  
...  
Keyword(s):  
Value Added ◽  
Likelihood Estimation ◽  
Signal Strength ◽  
Received Signal Strength ◽  
Stochastic Gradient Descent ◽  
Indoor Environments ◽  
Localization Accuracy ◽  
Indoor Location ◽  
Location Fingerprinting ◽  
Gradient Descent Algorithm

The development of the Internet of Things has accelerated research in the indoor location fingerprinting technique, which provides value-added localization services for existing WLAN infrastructures without the need for any specialized hardware. The deployment of a fingerprinting based localization system requires an extremely large amount of measurements on received signal strength information to generate a location fingerprint database. Nonetheless, this requirement can rarely be satisfied in most indoor environments. In this paper, we target one but common situation when the collected measurements on received signal strength information are insufficient, and show limitations of existing location fingerprinting methods in dealing with inadequate location fingerprints. We also introduce a novel method to reduce noise in measuring the received signal strength based on the maximum likelihood estimation, and compute locations from inadequate location fingerprints by using the stochastic gradient descent algorithm. Our experiment results show that our proposed method can achieve better localization performance even when only a small quantity of RSS measurements is available. Especially when the number of observations at each location is small, our proposed method has evident superiority in localization accuracy.

Sign in / Sign up

Export Citation Format

Share Document