scholarly journals Seismic Discrimination between Earthquakes and Explosions Using Support Vector Machine

Sensors ◽  
2020 ◽  
Vol 20 (7) ◽  
pp. 1879
Author(s):  
Sangkyeum Kim ◽  
Kyunghyun Lee ◽  
Kwanho You
Keyword(s):  
Support Vector Machine ◽  
Hough Transform ◽  
Laser Interferometer ◽  
Kernel Functions ◽  
P Wave ◽  
Support Vector ◽  
Nonlinearity Error ◽  
Seismic Discrimination ◽  
Heterodyne Laser Interferometer ◽  
Discrimination Method

The discrimination between earthquakes and explosions is a serious issue in seismic signal analysis. This paper proposes a seismic discrimination method using support vector machine (SVM), wherein the amplitudes of the P-wave and the S-wave of the seismic signals are selected as feature vectors. Furthermore, to improve the seismic discrimination performance using a heterodyne laser interferometer for seismic wave detection, the Hough transform is applied as a compensation method for the periodic nonlinearity error caused by the frequency-mixing in the laser interferometric seismometer. In the testing procedure, different kernel functions of SVM are used to discriminate between earthquakes and explosions. The outstanding performance of a laser interferometer and Hough transform method for precision seismic measurement and nonlinearity error compensation is confirmed through some experiments using a linear vibration stage. In addition, the effectiveness of the proposed discrimination method using a heterodyne laser interferometer is verified through a receiver operating characteristic curve and other performance indices obtained from practical experiments.

Forecasting Repair and Maintenance Services of Medical Devices Using Support Vector Machine

2021 ◽  
Author(s):  
Hao-yu Liao ◽  
Willie Cade ◽  
Sara Behdad
Keyword(s):  
Machine Learning ◽  
Support Vector Machine ◽  
Medical Devices ◽  
Kernel Functions ◽  
Support Vector ◽  
Quality Level ◽  
Learning Tools ◽  
Physical Damage ◽  
Repair Service ◽  
Product Failure

Abstract Accurate prediction of product failures and the need for repair services become critical for various reasons, including understanding the warranty performance of manufacturers, defining cost-efficient repair strategies, and compliance with safety standards. The purpose of this study is to use machine learning tools to analyze several parameters crucial for achieving a robust repair service system, including the number of repairs, the time of the next repair ticket or product failure, and the time to repair. A large dataset of over 530,000 repairs and maintenance of medical devices has been investigated by employing the Support Vector Machine (SVM) tool. SVM with four kernel functions is used to forecast the timing of the next failure or repair request in the system for two different products and two different failure types, namely random failure and physical damage. A frequency analysis is also conducted to explore the product quality level based on product failure and the time to repair it. Besides, the best probability distributions are fitted for the number of failures, the time between failures, and the time to repair. The results reveal the value of data analytics and machine learning tools in analyzing post-market product performance and the cost of repair and maintenance operations.

Deep learning model for protein disease classification

2021 ◽  
Vol 16 ◽  
Author(s):  
Farida Alaaeldin Mostafa ◽  
Yasmine Mohamed Afify ◽  
Rasha Mohamed Ismail ◽  
Nagwa Lotfy Badr
Keyword(s):  
Neural Network ◽  
Support Vector Machine ◽  
Deep Learning ◽  
Convolutional Neural Network ◽  
Network Model ◽  
Neural Network Model ◽  
Protein Analysis ◽  
Kernel Functions ◽  
Support Vector ◽  
Feature Descriptors

Background: Protein sequence analysis helps in the prediction of protein functions. As the number of proteins increases, it gives the bioinformaticians a challenge to analyze and study the similarity between them. Most of the existing protein analysis methods use Support Vector Machine. Deep learning did not receive much attention regarding protein analysis as it is noted that little work focused on studying the protein diseases classification. Objective: The contribution of this paper is to present a deep learning approach that classifies protein diseases based on protein descriptors. Methods: Different protein descriptors are used and decomposed into modified feature descriptors. Uniquely, we introduce using Convolutional Neural Network model to learn and classify protein diseases. The modified feature descriptors are fed to the Convolutional Neural Network model on a dataset of 1563 protein sequences classified into 3 different disease classes: Aids, Tumor suppressor, and Proto oncogene. Results: The usage of the modified feature descriptors shows a significant increase in the performance of the Convolutional Neural Network model over Support Vector Machine using different kernel functions. One modified feature descriptor improved by 19.8%, 27.9%, 17.6%, 21.5%, 17.3%, and 22% for evaluation metrics: Area Under the Curve, Matthews Correlation Coefficient, Accuracy, F1-score, Recall, and Precision, respectively. Conclusion: Results show that the prediction of the proposed modified feature descriptors significantly surpasses that of Support Vector Machine model.

The Contrastive Analysis of Predicting Riveting Pieces of Corrosion Fatigue Based on Multiple Kernel Function

2014 ◽  
Vol 687-691 ◽  
pp. 587-592
Author(s):  
Jian Fei Chen ◽  
Gang Jiang ◽  
Zi Sheng Li ◽  
Jian Feng Yang
Keyword(s):  
Support Vector Machine ◽  
Least Squares ◽  
Corrosion Fatigue ◽  
Corrosion Damage ◽  
Kernel Functions ◽  
Support Vector ◽  
Grey System ◽  
Damage Prediction ◽  
Mechanical Structure ◽  
Long Term Storage

In the process of long-term storage, the equipment would happen storage environment contaminated corrosion, mechanical structure stress corrosion damage. Currently,the corrosion fatigue damage prediction accuracy of method was low. Different kernel functions were adopted by this paper to compare based on least squares support vector machine (LSSVM). Besides, comparison was made among the BP neural network method, Standard Support Vector Machines (SVM), Grey System Prediction model Method and the radial basis function kernel least squares support vector machine (RBF_LSSVM) method by the simulation experiment. The optimal results finally were applied to practical engineering. The results showed that high accuracy and performance could be gained by employing the RBF_LSSVM method for predicting the trends of the mechanical structure rivet corrosion.

Image Normalization and Weighted Classification Using an Efficient Approach for SVM Classifiers

2020 ◽  
Vol 20 (04) ◽  
pp. 2050035
Author(s):  
Sumit Dhariwal ◽  
Sellappan Palaniappan
Keyword(s):  
Support Vector Machine ◽  
Image Classification ◽  
Error Rate ◽  
Kernel Functions ◽  
Support Vector ◽  
Image Normalization ◽  
Novel Approach ◽  
Low Levels ◽  
To Come

The content of massive image changing the brightest brightness is an impasse between most tests of sorted image realizations with low-resolution representation. I have done this research through image security, which will help curb crime in the coming days, and we propose a novel receipt for their strong and effective counterpart. Image classification using low levels of the image is a difficult method, so for this, I have adopted the method of automating the semantic image classification of this research and used it with different SVM classifiers, based on the normalized weighted feature support vector machine for semantic image classification. This is a novel approach given that weighted feature or normalized biased feature is applied and it is found that the normalized method is the best. It also uses normalized weighted features to compute kernel functions and train SVM. The trained SVM is then used to classify new images. During training and generalization, we displayed a decrease of identification error rate and there have been many benefits of using SVM with better performance in normalized image-cataloging systems. The importance of this technique and its role will be highlighted in the years to come.

scholarly journals Pancreatic Cancer Early Detection Using Twin Support Vector Machine Based on Kernel

Symmetry ◽  
2020 ◽  
Vol 12 (4) ◽  
pp. 667
Author(s):  
Wismaji Sadewo ◽  
Zuherman Rustam ◽  
Hamidah Hamidah ◽  
Alifah Roudhoh Chusmarsyah
Keyword(s):  
Machine Learning ◽  
Pancreatic Cancer ◽  
Support Vector Machine ◽  
Early Detection ◽  
Feature Space ◽  
Kernel Functions ◽  
Twin Support Vector Machine ◽  
Polynomial Kernel ◽  
Support Vector ◽  
Rbf Kernel

Early detection of pancreatic cancer is difficult, and thus many cases of pancreatic cancer are diagnosed late. When pancreatic cancer is detected, the cancer is usually well developed. Machine learning is an approach that is part of artificial intelligence and can detect pancreatic cancer early. This paper proposes a machine learning approach with the twin support vector machine (TWSVM) method as a new approach to detecting pancreatic cancer early. TWSVM aims to find two symmetry planes such that each plane has a distance close to one data class and as far as possible from another data class. TWSVM is fast in building a model and has good generalizations. However, TWSVM requires kernel functions to operate in the feature space. The kernel functions commonly used are the linear kernel, polynomial kernel, and radial basis function (RBF) kernel. This paper uses the TWSVM method with these kernels and compares the best kernel for use by TWSVM to detect pancreatic cancer early. In this paper, the TWSVM model with each kernel is evaluated using a 10-fold cross validation. The results obtained are that TWSVM based on the kernel is able to detect pancreatic cancer with good performance. However, the best kernel obtained is the RBF kernel, which produces an accuracy of 98%, a sensitivity of 97%, a specificity of 100%, and a running time of around 1.3408 s.

scholarly journals Earthquake Magnitude Estimation Using a Total Noise Enhanced Optimization Model

Sensors ◽  
2019 ◽  
Vol 19 (6) ◽  
pp. 1454 ◽  
Author(s):  
Kyunghyun Lee ◽  
Jinhwan Oh ◽  
Hyukwoo Lee ◽  
Kwanho You
Keyword(s):  
Seismic Waves ◽  
Laser Interferometer ◽  
Optimal Solution ◽  
Ground Vibration ◽  
Earthquake Magnitude ◽  
P Wave ◽  
Total Noise ◽  
Acceleration Amplitude ◽  
Precise Prediction ◽  
Heterodyne Laser Interferometer

In this paper, a heterodyne laser interferometer, which is used as a sensor for high-precision displacement measurement, is introduced to measure ground vibration and seismic waves as a seismometer. The seismic wave is measured precisely through the displacement variation obtained by the heterodyne laser interferometer. The earthquake magnitude is estimated using only the P-wave magnitudes for the first 3 s through the total noise enhanced optimization (TNEO) model. We use data from southern California to investigate the relationship between peak acceleration amplitude ( P d ) and the earthquake magnitude ( M g ). For precise prediction of the earthquake magnitude using only the P d value, the TNEO model derives the relation equation between P d and the magnitude, considering the noise present in each measured seismic data. The optimal solution is obtained from the TNEO model based objective function. We proved the performance of the proposed method through simulation and experimental results.

Sign in / Sign up

Export Citation Format

Share Document