scholarly journals Research on Visualization and Error Compensation of Demolition Robot Attachment Changing

Sensors ◽  
2020 ◽  
Vol 20 (8) ◽  
pp. 2428 ◽  
Author(s):  
Qian Deng ◽  
Shuliang Zou ◽  
Hongbin Chen ◽  
Weixiong Duan
Keyword(s):  
Coordinate System ◽  
Coordinate Transformation ◽  
Error Compensation ◽  
Compensation Method ◽  
Positioning Error ◽  
Nuclear Facility ◽  
Reference Coordinate System ◽  
Accuracy Requirement ◽  
Docking Accuracy ◽  
Changing Process

Attachment changing in demolition robots has a high docking accuracy requirement, so it is hard for operators to control this process remotely through the perspective of a camera. To solve this problem, this study investigated positioning error and proposed a method of error compensation to achieve a highly precise attachment changing process. This study established a link parameter model for the demolition robot, measured the error in the attachment changing, introduced a reference coordinate system to solve the coordinate transformation from the dock spot of the robot’s quick-hitch equipment to the dock spot of the attachment, and realized error compensation. Through calculation and experimentation, it was shown that the error compensation method proposed in this study reduced the level of error in attachment changing from the centimeter to millimeter scale, thereby meeting the accuracy requirements for attachment changing. This method can be applied to the remote-controlled attachment changing process of demolition robots, which provides the basis for the subsequent automatic changing of attachments. This has the potential to be applied in nuclear facility decommissioning and dismantling, as well as other radioactive environments.

scholarly journals A Positioning Error Compensation Method for a Mobile Measurement System Based on Plane Control

Sensors ◽  
2020 ◽  
Vol 20 (1) ◽  
pp. 294
Author(s):  
Bo Shi ◽  
Fan Zhang ◽  
Fanlin Yang ◽  
Yanquan Lyu ◽  
Shun Zhang ◽  
...  
Keyword(s):  
Measurement System ◽  
Error Compensation ◽  
Point Cloud ◽  
Satellite System ◽  
Compensation Method ◽  
Positioning Error ◽  
Signal Loss ◽  
Middle Point ◽  
Existing Building ◽  
Mobile Measurement

Global navigation satellite system (GNSS)/inertial navigation system (INS) navigation technology is one of the core technologies in a mobile measurement system and can provide real-time geo-referenced information. However, in the environment measurements, buildings cover up the GNSS signal, causing satellite signals to experience loss-of-lock. At this time errors of INS independent navigation accumulate rapidly, so it cannot meet the needs of the mobile measurement system. In this paper, a positioning error compensation method based on plane control is proposed by analyzing the error characteristics of position and orientation caused by satellite signal loss-of-lock in the urban environment. This method control uses planar features and the laser point cloud positioning equation to establish an adjustment model that ignores the influence of the attitude error and finds the positioning error at the middle point of the GNSS signal loss-of-lock time period, and then compensates for the error at other points by using the characteristics of the positioning error. The experimental results show that the accuracy of the compensated laser point cloud has been significantly improved, and the feasibility of the method is verified. Meanwhile, the method can rely on the existing building plane so the method is adaptable and easy to implement.

A Method of Pitch Error Compensation for the Open Numerical Control System

2016 ◽  
Vol 693 ◽  
pp. 1711-1717 ◽  
Author(s):  
Yan Yu Ding ◽  
Tai Yong Wang ◽  
Qing Jian Liu ◽  
Jing Chuan Dong ◽  
Bo Li ◽  
...  
Keyword(s):  
Control System ◽  
Error Compensation ◽  
Spline Interpolation ◽  
Compensation Method ◽  
Numerical Control ◽  
Computation Method ◽  
Numerical Control System ◽  
Accuracy Requirement ◽  
Pitch Error ◽  
Open Numerical Control System

The traditional fixed pitch error compensation method exists some defects, such as sampling points are not comprehensive and the necessary compensation points are easy to miss. Faced with these problems, this paper presented a new pitch error compensation method based on the open numerical control system. With this method, the traditional measurement points were serried, and more pitch error data were measured. Then calculated the error data with the cubic spline interpolation computation method, and the compensation location and value were obtained according to the accuracy requirement. The pitch error compensation was completed when the data inputted into the open numerical control system with a defined format.

scholarly journals Positioning Error Compensation for Industrial Robots Based on Stiffness Modelling

Complexity ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Yingjie Li ◽  
Guanbin Gao ◽  
Fei Liu
Keyword(s):  
Error Compensation ◽  
Compensation Method ◽  
Industrial Robots ◽  
Radial Deformation ◽  
Positioning Error ◽  
Axial Deformation ◽  
Element Analysis ◽  
Positioning Accuracy ◽  
Positioning Errors ◽  
Deformation Error

Insufficient stiffness of industrial robots is a significant factor which affects its positioning accuracy. To improve the positioning accuracy, a novel positioning error compensation method based on the stiffness modelling is proposed in this paper. First, the positioning errors considering the end load and gravity of industrial robots due to stiffness are analyzed. Based on the results of analysis, it is found that the positioning errors can be described by two kinds of deformation errors at joints: the axial deformation error and the radial deformation error. Then, the axial deformation error is modelled by the differential relationship of kinematics equations. The model of radial deformation error is deduced through the recurrence method and rotation transformation between joints. Finally, these two models are transformed into a Cartesian coordinate system, and a positioning error compensation method based on these two models is presented. Simulations based on the finite element analysis are implemented to verify the positioning error compensation method. The results show that the suggested method can efficiently predict the positioning error according to the gravity and loads, so that the positioning accuracy of industrial robots can be improved with the proposed method.

2.2. Working Group 2: Conceptual Definitions of Reference Coordinate Systems for Earth Dynamics

1975 ◽  
Vol 26 ◽  
pp. 21-26
Keyword(s):  
Coordinate System ◽  
Working Group ◽  
General Character ◽  
Coordinate Systems ◽  
Reference Coordinate System ◽  
Group 2 ◽  
Definition Of ◽  
Earth Dynamics

An ideal definition of a reference coordinate system should meet the following general requirements:1. It should be as conceptually simple as possible, so its philosophy is well understood by the users.2. It should imply as few physical assumptions as possible. Wherever they are necessary, such assumptions should be of a very general character and, in particular, they should not be dependent upon astronomical and geophysical detailed theories.3. It should suggest a materialization that is dynamically stable and is accessible to observations with the required accuracy.

scholarly journals GPS Positioning Error Compensation Based on Kalman Filtering

2021 ◽  
Vol 1920 (1) ◽  
pp. 012088
Author(s):  
Wenjiu Zhu ◽  
Jie Hou ◽  
Zhengqiong Liu ◽  
Zhizhong Ding
Keyword(s):  
Kalman Filtering ◽  
Error Compensation ◽  
Positioning Error ◽  
Gps Positioning

scholarly journals Research of Calibration Method for Industrial Robot Based on Error Model of Position

2021 ◽  
Vol 11 (3) ◽  
pp. 1287
Author(s):  
Tianyan Chen ◽  
Jinsong Lin ◽  
Deyu Wu ◽  
Haibin Wu
Keyword(s):  
Coordinate System ◽  
Industrial Robot ◽  
Calibration Method ◽  
Error Model ◽  
Position Error ◽  
Industrial Robots ◽  
Positioning Error ◽  
Robot Position ◽  
General Measurement ◽  
Parameter Error

Based on the current situation of high precision and comparatively low APA (absolute positioning accuracy) in industrial robots, a calibration method to enhance the APA of industrial robots is proposed. In view of the "hidden" characteristics of the RBCS (robot base coordinate system) and the FCS (flange coordinate system) in the measurement process, a comparatively general measurement and calibration method of the RBCS and the FCS is proposed, and the source of the robot terminal position error is classified into three aspects: positioning error of industrial RBCS, kinematics parameter error of manipulator, and positioning error of industrial robot end FCS. The robot position error model is established, and the relation equation of the robot end position error and the industrial robot model parameter error is deduced. By solving the equation, the parameter error identification and the supplementary results are obtained, and the method of compensating the error by using the robot joint angle is realized. The Leica laser tracker is used to verify the calibration method on ABB IRB120 industrial robot. The experimental results show that the calibration method can effectively enhance the APA of the robot.

Sign in / Sign up

Export Citation Format

Share Document