scholarly journals In Situ Detection of Water Leakage for Textile-Reinforced Composites

Sensors ◽  
2020 ◽  
Vol 20 (22) ◽  
pp. 6641
Author(s):  
Julie Regnier ◽  
Aurélie Cayla ◽  
Christine Campagne ◽  
Eric Devaux
Keyword(s):  
Short Circuit ◽  
Reinforced Composites ◽  
Electrically Conductive ◽  
Implementation Processes ◽  
Water Detection ◽  
Conductivity Variation ◽  
Conductive Yarns ◽  
In Situ Detection ◽  
Carbon Based

By incorporating electrically conductive yarns into a waterproof membrane, one can detect epoxy resin cracking or liquid leakage. Therefore, this study examined the electrical conductivity variations of several yarns (metallic or carbon-based) for cracking and water detection. The first observations concerned the detectors’ feasibility by investigating their conductivity variations during both their resin implementation processes and their resin cracking. Throughout this experiment, two phenomena were detected: the compression and the separation of the fibres by the resin. In addition, the resin cracking had an important role in decreasing the yarns’ conductivity. The second part of this study concerned water detection. Two principles were established and implemented, first with yarns and then with yarns incorporated into the resin. First, the principle of absorption was based on the conductivity variation with the yarns’ swelling after contact with water. A short circuit was established by the creation of a conductive path when a drop of water was deposited between two conductive, parallel yarns. Through the influence of the yarns’ properties, this study explored the metallic yarns’ capacity to better detect water with a short circuit and the ability of the carbon-based yarns to detect water by the principle of absorption.

scholarly journals Melt Spinning of Flexible and Conductive Immiscible Thermoplastic/Elastomer Monofilament for Water Detection

Nanomaterials ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 92
Author(s):  
Julie Regnier ◽  
Aurélie Cayla ◽  
Christine Campagne ◽  
Éric Devaux
Keyword(s):  
Melt Spinning ◽  
Short Circuit ◽  
Conductive Polymer ◽  
Thermoplastic Elastomer ◽  
Electrically Conductive ◽  
Immiscible Polymers ◽  
Water Detection ◽  
Conductivity Variation ◽  
Conductive Fillers ◽  
Polyamide 6.6

In many textile fields, such as industrial structures or clothes, one way to detect a specific liquid leak is the electrical conductivity variation of a yarn. This yarn can be developed using melt spun of Conductive Polymer Composites (CPCs), which blend insulating polymer and electrically conductive fillers. This study examines the influence of the proportions of an immiscible thermoplastic/elastomer blend for its implementation and its water detection. The thermoplastic polymer used for the detection property is the polyamide 6.6 (PA6.6) filled with enough carbon nanotubes (CNT) to exceed the percolation threshold. However, the addition of fillers decreases the polymer fluidity, resulting in the difficulty to implement the CPC. Using an immiscible polymers blend with an elastomer, which is a propylene-based elastomer (PBE) permits to increase this fluidity and to create a flexible conductive monofilament. After characterizations (morphology, rheological and mechanical) of this blend (PA6.6CNT/PBE) in different proportions, two principles of water detection are established and carried out with the monofilaments: the principle of absorption and the short circuit. It is found that the morphology of the immiscible polymer blend had a significant role in the water detection.

In-situ Detection of Active Sites for Carbon-Based Bifunctional Oxygen Reduction and Evolution Catalysis

2021 ◽  
pp. 138285
Author(s):  
Richard W. Haid ◽  
Regina M. Kluge ◽  
Thorsten O. Schmidt ◽  
Aliaksandr S. Bandarenka
Keyword(s):  
Oxygen Reduction ◽  
Active Sites ◽  
In Situ Detection ◽  
Carbon Based

Rapid quantification and in situ detection of nitrifying bacteria in biofilms by monoclonal antibody method

2000 ◽  
Vol 41 (4-5) ◽  
pp. 301-308 ◽  
Author(s):  
N. Noda ◽  
H. Ikuta ◽  
Y. Ebie ◽  
A. Hirata ◽  
S. Tsuneda ◽  
...  
Keyword(s):  
Monoclonal Antibody ◽  
Monoclonal Antibodies ◽  
Fluorescent Antibody ◽  
Nitrifying Bacteria ◽  
Fluorescent Antibody Technique ◽  
Antibody Technique ◽  
Antibody Method ◽  
In Situ Detection ◽  
Rapid Quantification

Fluorescent antibody technique by the monoclonal antibody method is very useful and helpful for the rapid quantification and in situ detection of the specific bacteria like nitrifiers in a mixed baxterial habitat such as a biofilm. In this study, twelve monoclonal antibodies against Nitrosomonas europaea (IFO14298) and sixteen against Nitrobacter winogradskyi (IFO14297) were raised from splenocytes of mice (BALB/c). It was found that these antibodies exhibited little cross reactivity against various kinds of heterotrophic bacteria. The direct cell count method using monoclonal antibodies could exactly detect and rapidly quantify N. europaea and N. winogradskyi. Moreover, the distribution of N. europaea and N. winogradskyi in a biofilm could be examined by in situ fluorescent antibody technique. It was shown that most of N. winogradskyi existed near the surface part and most of N. europaea existed at the inner part of the polyethylene glycol (PEG) gel pellet, which had entrapped activated sludge and used in a landfill leachate treatment reactor. It was suggested that this monoclonal antibody method was utilized for estimating and controlling the population of nitrifying bacteria as a quick and favorable tool.

scholarly journals Single Step In Situ Detection of Surface Protein and MicroRNA in Clustered Extracellular Vesicles Using Flow Cytometry

2021 ◽  
Vol 10 (2) ◽  
pp. 319
Author(s):  
Hee Cheol Yang ◽  
Won Jong Rhee
Keyword(s):  
Extracellular Vesicles ◽  
Liquid Biopsy ◽  
Molecular Beacon ◽  
Disease Diagnosis ◽  
Single Step ◽  
Flow Cytometer ◽  
Surface Proteins ◽  
Biomarker Detection ◽  
In Situ Detection

Because cancers are heterogeneous, it is evident that multiplexed detection is required to achieve disease diagnosis with high accuracy and specificity. Extracellular vesicles (EVs) have been a subject of great interest as sources of novel biomarkers for cancer liquid biopsy. However, EVs are nano-sized particles that are difficult to handle; thus, it is necessary to develop a method that enables efficient and straightforward EV biomarker detection. In the present study, we developed a method for single step in situ detection of EV surface proteins and inner miRNAs simultaneously using a flow cytometer. CD63 antibody and molecular beacon-21 were investigated for multiplexed biomarker detection in normal and cancer EVs. A phospholipid-polymer-phospholipid conjugate was introduced to induce clustering of the EVs analyzed using nanoparticle tracking analysis, which enhanced the detection signals. As a result, the method could detect and distinguish cancer cell-derived EVs using a flow cytometer. Thus, single step in situ detection of multiple EV biomarkers using a flow cytometer can be applied as a simple, labor- and time-saving, non-invasive liquid biopsy for the diagnosis of various diseases, including cancer.

Sign in / Sign up

Export Citation Format

Share Document