scholarly journals Design of Ultrasonic Synthetic Aperture Imaging Systems Based on a Non-Grid 2D Sparse Array

Sensors ◽  
2021 ◽  
Vol 21 (23) ◽  
pp. 8001
Author(s):  
Júlio Cesar Eduardo de Souza ◽  
Montserrat Parrilla Romero ◽  
Ricardo Tokio Higuti ◽  
Óscar Martínez-Graullera
Keyword(s):  
Experimental Data ◽  
Imaging System ◽  
Computational Cost ◽  
Imaging Systems ◽  
Synthetic Aperture ◽  
Two Dimensional ◽  
System Complexity ◽  
Sparse Arrays ◽  
Sparse Array ◽  
Spiral Array

This work provides a guide to design ultrasonic synthetic aperture systems for non-grid two-dimensional sparse arrays such as spirals or annular segmented arrays. It presents an algorithm that identifies which elements have a more significant impact on the beampattern characteristics and uses this information to reduce the number of signals, the number of emitters and the number of parallel receiver channels involved in the beamforming process. Consequently, we can optimise the 3D synthetic aperture ultrasonic imaging system for a specific sparse array, reducing the computational cost, the hardware requirements and the system complexity. Simulations using a Fermat spiral array and experimental data based on an annular segmented array with 64 elements are used to assess this algorithm.

Modelling Non-Uniform Bleed in Axial Compressors

2015 ◽  
Author(s):  
S. D. Grimshaw ◽  
G. Pullan ◽  
T. P. Hynes
Keyword(s):  
Experimental Data ◽  
Computational Cost ◽  
Three Dimensional ◽  
Flow Coefficient ◽  
Axial Distance ◽  
Two Dimensional ◽  
Flow Angle ◽  
Axial Compressors ◽  
Two Dimensional Flow ◽  
Satisfactory Prediction

The coupling between the bleed system and the flowfield of a downstream compressor stage is studied using two approaches. In the first, three-dimensional, full annulus, unsteady computations simulate the flow in a low speed research compressor with non-uniform bleed extraction. Comparisons with experimental data show that the flow prediction in the main annulus is accurate to within 0.005 of flow coefficient and 0.5° of flow angle. The CFD is then used to provide a description of flow within the bleed system itself. In the second approach, a two-dimensional mean radius model, similar to that adopted by Hynes and Greitzer in previous work on compressor stability, is used to simulate the response of the compressor to non-uniform bleed. This model is validated against experimental data for a single stage compressor and despite the inherent assumptions (two dimensional flow and simplified compressor response) provides a satisfactory prediction of the flow for preliminary design purposes with orders of magnitude less computational cost than full 3D CFD. The model is then used to investigate the effect of different levels of bleed non-uniformity and of varying the axial distance between the bleed and the downstream stage. Reducing bleed non-uniformity and moving the stage away from the bleed slot are predicted to reduce the circumferential non-uniformity of the flow entering the stage.

Coherent radiometric imaging using antennas with beam synthesizing

2015 ◽  
Vol 7 (3-4) ◽  
pp. 453-458 ◽  
Author(s):  
Konstantin A. Lukin ◽  
Volodymyr V. Kudriashov ◽  
Pavlo L. Vyplavin ◽  
Volodymyr P. Palamarchuk ◽  
Sergii K. Lukin
Keyword(s):  
Experimental Investigation ◽  
Imaging System ◽  
Reference Signal ◽  
Aperture Synthesis ◽  
Imaging Systems ◽  
Synthetic Aperture ◽  
Theoretical Studies ◽  
Range Resolution ◽  
External Reference ◽  
Imaging Algorithms

The paper is devoted to coherent radiometric imaging systems. The investigated systems may be considered as a version of bistatic noise waveform passive radar with synthetic aperture having external reference. Reference signal in this imaging system is received from the investigated emitting object using auxiliary receiver. Although a number of theoretical studies on aperture synthesis imaging algorithms exist, relatively few of them deal with experimental investigation. In particular, no information concerning range-azimuth coherent radiometric imaging has been found. In this paper, an experimental investigation of possibility to generate coherent radiometric images using two antennas with beam synthesizing is carried out. Indoor radiometric imaging has been validated using absorbers as the emitting objects. These experiments enabled to estimate range resolution of the radiometric system achieved by focusing antennas with beam synthesizing for range span limited by means about bistatic baseline.

scholarly journals Two-Dimensional Random Arrays for Real Time Volumetric Imaging

1994 ◽  
Vol 16 (3) ◽  
pp. 143-163 ◽  
Author(s):  
Richard E. Davidsen ◽  
Jørgen A. Jensen ◽  
Stephen W. Smith
Keyword(s):  
Uniform Distribution ◽  
Real Time ◽  
Imaging System ◽  
Frame Rate ◽  
Depth Of Field ◽  
System Response ◽  
Two Dimensional ◽  
Volumetric Imaging ◽  
Sparse Array ◽  
Random Array

Two-dimensional arrays are necessary for a variety of ultrasonic imaging techniques, including elevation focusing, 2-D phase aberration correction, and real time volumetric imaging. In order to reduce system cost and complexity, sparse 2-D arrays have been considered with element geometries selected ad hoc, by algorithm, or by random process. Two random sparse array geometries and a sparse array with a Mills cross receive pattern were simulated and compared to a fully sampled aperture with the same overall dimensions. The sparse arrays were designed to the constraints of the Duke University real time volumetric imaging system, which employs a wide transmit beam and receive mode parallel processing to increase image frame rate. Depth-of-field comparisons were made from simulated on-axis and off-axis beamplots at ranges from 30 to 160 mm for both coaxial and offset transmit and receive beams. A random array with Gaussian distribution of transmitters and uniform distribution of receivers was found to have better resolution and depth-of-field than both a Mills cross array and a random array with uniform distribution of both transmit and receive elements. The Gaussian random array was constructed and experimental system response measurements were made at several ranges. Comparisons of B-scan images of a tissue mimicking phantom show improvement in resolution and depth-of-field consistent with simulation results.

scholarly journals Modeling Nonuniform Bleed in Axial Compressors

2016 ◽  
Vol 138 (9) ◽  
Author(s):  
S. D. Grimshaw ◽  
G. Pullan ◽  
T. P. Hynes
Keyword(s):  
Experimental Data ◽  
Computational Cost ◽  
Three Dimensional ◽  
Flow Coefficient ◽  
Axial Distance ◽  
Two Dimensional ◽  
Flow Angle ◽  
Axial Compressors ◽  
Two Dimensional Flow ◽  
Computational Fluid Dynamics Cfd

The coupling between the bleed system and the flowfield of a downstream compressor stage is studied using two approaches. In the first approach, three-dimensional, full annulus, unsteady computations simulate the flow in a low-speed research compressor with nonuniform bleed extraction. Comparisons with experimental data show that the flow prediction in the main annulus is accurate to within 0.005 of flow coefficient and 0.5deg of flow angle. The computational fluid dynamics (CFD) is then used to provide a description of flow within the bleed system itself. In the second approach, a two-dimensional mean radius model, similar to that adopted by Hynes and Greitzer in the previous work on compressor stability, is used to simulate the response of the compressor to nonuniform bleed. This model is validated against experimental data for a single-stage compressor, and despite the inherent assumptions (two-dimensional flow and simplified compressor response), provides a satisfactory prediction of the flow for preliminary design purposes with orders of magnitude less computational cost than full 3D CFD. The model is then used to investigate the effect of different levels of bleed nonuniformity and of varying the axial distance between the bleed and the downstream stage. Reducing bleed nonuniformity and moving the stage away from the bleed slot are predicted to reduce the circumferential nonuniformity of the flow entering the stage.

Modelling of Moisture Movement in Wood during Outdoor Storage

2001 ◽  
Vol 6 (2) ◽  
pp. 3-14 ◽  
Author(s):  
R. Baronas ◽  
F. Ivanauskas ◽  
I. Juodeikienė ◽  
A. Kajalavičius
Keyword(s):  
Experimental Data ◽  
Finite Difference ◽  
Climatic Conditions ◽  
Two Dimensional ◽  
Moisture Movement ◽  
Finite Difference Technique ◽  
Long Term Storage ◽  
Space Formulation ◽  
Term Storage

A model of moisture movement in wood is presented in this paper in a two-dimensional-in-space formulation. The finite-difference technique has been used in order to obtain the solution of the problem. The model was applied to predict the moisture content in sawn boards from pine during long term storage under outdoor climatic conditions. The satisfactory agreement between the numerical solution and experimental data was obtained.

Golay Coded Sequences in Synthetic Aperture Imaging Systems

2011 ◽  
Vol 36 (4) ◽  
Author(s):  
Ihor Trots ◽  
Yuriy Tasinkevych ◽  
Andrzej Nowicki ◽  
Marcin Lewandowski
Keyword(s):  
Imaging Systems ◽  
Synthetic Aperture ◽  
Synthetic Aperture Imaging

EXPRESS: Design Considerations for Discrete Frequency Infrared Microscopy Systems

2021 ◽  
pp. 000370282110133
Author(s):  
Rohit Bhargava ◽  
Yamuna Dilip Phal ◽  
Kevin Yeh
Keyword(s):  
Imaging System ◽  
Chemical Imaging ◽  
Optical Component ◽  
Imaging Systems ◽  
Imaging Data ◽  
Discrete Frequency ◽  
Figures Of Merit ◽  
Design Considerations ◽  
Hardware Implementations ◽  
Measurement Capabilities

Discrete frequency infrared (DFIR) chemical imaging is transforming the practice of microspectroscopy by enabling a diversity of instrumentation and new measurement capabilities. While a variety of hardware implementations have been realized, considerations in the design of all-IR microscopes have not yet been compiled. Here we describe the evolution of IR microscopes, provide rationales for design choices, and the major considerations for each optical component that together comprise an imaging system. We analyze design choices in illustrative examples that use these components to optimize performance, under their particular constraints. We then summarize a framework to assess the factors that determine an instrument’s performance mathematically. Finally, we summarize the design and analysis approach by enumerating performance figures of merit for spectroscopic imaging data that can be used to evaluate the capabilities of imaging systems or suitability for specific intended applications. Together, the presented concepts and examples should aid in understanding available instrument configurations, while guiding innovations in design of the next generation of IR chemical imaging spectrometers.

scholarly journals Modelling Weirs in Two-Dimensional Shallow Water Models

Water ◽  
2021 ◽  
Vol 13 (16) ◽  
pp. 2152
Author(s):  
Gonzalo García-Alén ◽  
Olalla García-Fonte ◽  
Luis Cea ◽  
Luís Pena ◽  
Jerónimo Puertas
Keyword(s):  
Experimental Data ◽  
Shallow Water ◽  
Shallow Water Equations ◽  
Water Model ◽  
Two Dimensional ◽  
Shallow Water Model ◽  
Experimental Dataset ◽  
River Hydraulics ◽  
Shallow Water Models ◽  
Water Models

2D models based on the shallow water equations are widely used in river hydraulics. However, these models can present deficiencies in those cases in which their intrinsic hypotheses are not fulfilled. One of these cases is in the presence of weirs. In this work we present an experimental dataset including 194 experiments in nine different weirs. The experimental data are compared to the numerical results obtained with a 2D shallow water model in order to quantify the discrepancies that exist due to the non-fulfillment of the hydrostatic pressure hypotheses. The experimental dataset presented can be used for the validation of other modelling approaches.

Sign in / Sign up

Export Citation Format

Share Document