scholarly journals Relative Positioning in Remote Areas Using a GNSS Dual Frequency Smartphone

Sensors ◽  
2021 ◽  
Vol 21 (24) ◽  
pp. 8354
Author(s):  
Américo Magalhães ◽  
Luísa Bastos ◽  
Dalmiro Maia ◽  
José Alberto Gonçalves
Keyword(s):  
Low Cost ◽  
Global Navigation Satellite Systems ◽  
Reference Station ◽  
Dual Frequency ◽  
Phase Measurements ◽  
Satellite Systems ◽  
Remote Areas ◽  
Wide Range ◽  
Innovative Capabilities ◽  
Global Navigation Satellite

The use of GPS positioning and navigation capabilities in mobile phones is present in our daily lives for more than a decade, but never with the centimeter level of precision that can actually be reached with several of the most recent smartphones. The introduction of the new GNSS systems (Global Navigation Satellite Systems), the European system Galileo, is opening new horizons in a wide range of areas that rely on precise georeferencing, namely the mass market smartphones apps. The constant growth of this market has brought new devices with innovative capabilities in hardware and software. The introduction of the Android 7 by Google, allowing access to the GNSS raw code and phase measurements, and the arrival of the new chip from Broadcom BCM47755 providing dual frequency in some smartphones came to revolutionize the positioning performance of these devices as never seen before. The Xiaomi Mi8 was the first smartphone to combine those features, and it is the device used in this work. It is well known that it is possible to obtain centimeter accuracy with this kind of device in relative static positioning mode with distances to a reference station up to a few tens of kilometers, which we also confirm in this paper. However, the main purpose of this work is to show that we can also get good positioning accuracy using long baselines. We used the ability of the Xiaomi Mi8 to get dual frequency code and phase raw measurements from the Galileo and GPS systems, to do relative static positioning in post-processing mode using wide baselines, of more than 100 km, to perform precise surveys. The results obtained were quite interesting with RMSE below 30 cm, showing that this type of smartphone can be easily used as a low-cost device, for georeferencing and mapping applications. This can be quite useful in remote areas where the CORS networks are not dense or even not available.

scholarly journals Initial Assessment of the LEO Based Navigation Signal Augmentation System from Luojia-1A Satellite

Sensors ◽  
2018 ◽  
Vol 18 (11) ◽  
pp. 3919 ◽  
Author(s):  
Lei Wang ◽  
Ruizhi Chen ◽  
Deren Li ◽  
Guo Zhang ◽  
Xin Shen ◽  
...  
Keyword(s):  
Carrier Phase ◽  
Phase Measurement ◽  
Global Navigation Satellite Systems ◽  
Initial Assessment ◽  
Dual Frequency ◽  
Carrier Phase Measurement ◽  
Phase Measurements ◽  
Satellite Systems ◽  
Navigation Signal ◽  
Global Navigation Satellite

A low Earth orbiter (LEO)-based navigation signal augmentation system is considered as a complementary of current global navigation satellite systems (GNSS), which can accelerate precise positioning convergence, strengthen the signal power, and improve signal quality. Wuhan University is dedicated to LEO-based navigation signal augmentation research and launched one scientific experimental satellite named Luojia-1A. The satellite is capable of broadcasting dual-frequency band ranging signals over China. The initial performance of the Luojia-1A satellite navigation augmentation system is assessed in this study. The ground tests indicate that the phase noise of the oscillator is sufficiently low to support the intended applications. The field ranging tests achieve 2.6 m and 0.013 m ranging precision for the pseudorange and carrier phase measurements, respectively. The in-orbit test shows that the internal precision of the ephemeris is approximate 0.1 m and the clock stability is 3 × 10−10. The pseudorange and carrier phase measurement noise evaluated from the geometry-free combination is about 3.3 m and 1.8 cm. Overall, the Luojia-1A navigation augmentation system is capable of providing useable LEO navigation augmentation signals with the empirical user equivalent ranging error (UERE) no worse than 3.6 m, which can be integrated with existing GNSS to improve the real-time navigation performance.

Precise carrier phase altimetry over lakes using dual-frequency reflected signals of the Global Navigation Satellite Systems (GNSS)

2021 ◽  
Author(s):  
Estel Cardellach ◽  
Weiqiang Li ◽  
Dallas Masters ◽  
Takayuki Yuasa ◽  
Franck Borde ◽  
...  
Keyword(s):  
Sea Ice ◽  
Carrier Phase ◽  
Radio Occultation ◽  
Global Navigation Satellite Systems ◽  
Data Sets ◽  
Dual Frequency ◽  
Effective Wavelength ◽  
Raw Data ◽  
Satellite Systems ◽  
Global Navigation Satellite

<p>Recently, different studies have shown evidence of signals transmitted by the Global Navigation Satellite Systems (GNSS), coherently reflected over some parts of the ocean, and received from cubesats. In particular, strong coherent scattering has been reported in regions with low water surface roughness as those near continental masses and in atolls. Over open ocean, few coherent signals were reported to be found, although the data sets were somewhat limited and certainly not exhaustive. The level of coherence in reflected GNSS signals depends on the roughness of the  surface (i.e. significant wave height and small scale ripples and waves induced by the wind), the viewing geometry (i.e. incidence angle, or equivalently, elevation angle of the GNSS satellite as seen from the point of reflection), propagation effects (namely ionospheric disturbances) and on the frequency (i.e. particular GNSS band, like L1/E1, L2 or L5/E5). These coherent measurements over ocean follow earlier evidence of coherent GNSS reflections over sea ice which date back to 2005, the time of UK-DMC mission. More recently, Sea Ice Thickness (SIT) retrievals have also been carried out with this technique, at an accuracy comparable to that of SMOS.</p><p>All the observations referred so far were done at a single frequency, L1/E1. So, there is an interest to explore the coherence at the other main GNSS bands, i.e. L2 and L5/E5 as well as to the widelane combinations between them (linear combinations of carrier-phase measurements, of longer effective wavelength). Spire Global radio occultation cubesats work at L1 and L2 frequency bands, and therefore provide unique dual-frequency raw data sets of reflected signals over open ocean, sea ice and inland water bodies. With these, it is possible to study the coherence of these targets at each of the bands and at their widelane combination, as well as the performance of altimetric retrievals at grazing angles of observation (very slant geometries, which facilitate coherence properties of the scattering). The dual-frequency observations can correct the ionospheric effects, and their widelane combinations, of longer effective wavelength, might expand the conditions for coherence. The fact that this new approach is fully compatible with small GNSS radio occultation payloads and missions, might represent a low cost source of precise altimetry to complement larger dedicated missions.</p><p>An ESA research study involving Spire Global and IEEC aims at studying this new potential altimetric technique. Raw data acquisitions from limb-looking antennas of Spire’s cubesat constellation were selected to be geographically and time collocated with ESA Sentinel 3A and 3B passes in order to compare the results of coherence and altimetry. For this study, the raw data at two frequencies, acquired at 6.2 Mbps, are shifted to intermediate frequencies and downloaded to the ground without any further processing. In-house software receivers are then applied to generate the reflected echoes or waveforms, and to track the phase of the carrier signals. Precise altimetry (a few cm in 20 ms integration) is then possible from these observables. The results of this activity will be shown, focusing on altimetric retrievals over large lakes.</p>

scholarly journals CENTIMETER-LEVEL, ROBUST GNSS-AIDED INERTIAL POST-PROCESSING FOR MOBILE MAPPING WITHOUT LOCAL REFERENCE STATIONS

2016 ◽  
Vol XLI-B3 ◽  
pp. 819-826
Author(s):  
J. J. Hutton ◽  
N. Gopaul ◽  
X. Zhang ◽  
J. Wang ◽  
V. Menon ◽  
...  
Keyword(s):  
Inertial Sensors ◽  
Global Navigation Satellite Systems ◽  
Reference Station ◽  
Mobile Mapping ◽  
Satellite Systems ◽  
Local Reference ◽  
Set Up ◽  
Global Navigation Satellite ◽  
Airborne Mapping ◽  
Advanced Model

For almost two decades mobile mapping systems have done their georeferencing using Global Navigation Satellite Systems (GNSS) to measure position and inertial sensors to measure orientation. In order to achieve cm level position accuracy, a technique referred to as post-processed carrier phase differential GNSS (DGNSS) is used. For this technique to be effective the maximum distance to a single Reference Station should be no more than 20 km, and when using a network of Reference Stations the distance to the nearest station should no more than about 70 km. This need to set up local Reference Stations limits productivity and increases costs, especially when mapping large areas or long linear features such as roads or pipelines. <br><br> An alternative technique to DGNSS for high-accuracy positioning from GNSS is the so-called Precise Point Positioning or PPP method. In this case instead of differencing the rover observables with the Reference Station observables to cancel out common errors, an advanced model for every aspect of the GNSS error chain is developed and parameterized to within an accuracy of a few cm. The Trimble Centerpoint RTX positioning solution combines the methodology of PPP with advanced ambiguity resolution technology to produce cm level accuracies without the need for local reference stations. It achieves this through a global deployment of highly redundant monitoring stations that are connected through the internet and are used to determine the precise satellite data with maximum accuracy, robustness, continuity and reliability, along with advance algorithms and receiver and antenna calibrations. <br><br> This paper presents a new post-processed realization of the Trimble Centerpoint RTX technology integrated into the Applanix POSPac MMS GNSS-Aided Inertial software for mobile mapping. Real-world results from over 100 airborne flights evaluated against a DGNSS network reference are presented which show that the post-processed Centerpoint RTX solution agrees with the DGNSS solution to better than 2.9 cm RMSE Horizontal and 5.5 cm RMSE Vertical. Such accuracies are sufficient to meet the requirements for a majority of airborne mapping applications.

scholarly journals A Surface KInematics Buoy (SKIB) for wave-current interactions studies

2018 ◽  
Author(s):  
Pedro Veras Guimarães ◽  
Fabrice Ardhuin ◽  
Peter Sutherland ◽  
Mickael Accensi ◽  
Michel Hamon ◽  
...  
Keyword(s):  
Low Cost ◽  
Short Wave ◽  
Global Navigation Satellite Systems ◽  
Motion Sensor ◽  
Satellite Systems ◽  
Ocean Surface Waves ◽  
Sensing Applications ◽  
Hull Design ◽  
Sensor Package ◽  
Global Navigation Satellite

Abstract. Global Navigation Satellite Systems (GNSS) and modern motion-sensor packages allow the measurement of ocean surface waves with low-cost drifters. Drifting along or across current gradients provides unique measurements of wave-current interactions. In this study, we investigate the response of several combinations of GNSS receiver, motion-sensor package and hull design in order to define a prototype surface kinematic buoy (SKIB) that is particularly optimized for measuring wave-current interactions, including relatively short wave components (relative frequency around 1 Hz) that are important for air-sea interactions and remote sensing applications. The comparison with existing Datawell Directional Waverider and SWIFT buoys, as well as stereo-video imagery demonstrates the accuracy of SKIB. The use of low-cost accelerometers and a spherical ribbed and skirted hull design provide acceptable heave spectra, while velocity estimates from GNSS receivers yield a mean direction and directional spread. Using a low-power acquisition board allows autonomous deployments over several months with data transmitted by satellite. The capability to measure current-induced wave variations is illustrated with data acquired in a macro-tidal coastal environment.

scholarly journals Experimental estimation of GNSS performances at the national aviation university

2020 ◽  
Vol 164 ◽  
pp. 03052
Author(s):  
Volodymir Kharchenko ◽  
Valeriy Konin ◽  
Olexiy Pogurelsky ◽  
Ekaterina Stativa
Keyword(s):  
Experimental Data ◽  
Continuous Monitoring ◽  
Goal Achievement ◽  
Global Navigation Satellite Systems ◽  
Reference Station ◽  
Satellite Systems ◽  
Systems Quality ◽  
Primary Focus ◽  
Global Navigation Satellite ◽  
Gnss Data

The goal of the research is to develop a of Global Navigation Satellite Systems quality monitoring methodology based on available equipment in the satellite navigation laboratory of the National Aviation University (Kyiv, Ukraine). For successful the goal achievement it is necessary to solve follow list of tasks: to determine the composition of the necessary equipment and order of it installing and connection; to develop the necessary software for processing received GNSS data; to estimate the GNSS characteristics with the help of experimental data. The primary focus of this research is on the following characteristics: accuracy (in terms of deviation coordinates in horizontal and vertical planes from the coordinates of the reference station and numerical values in meters); integrity information (summarized in the form of horizontal and Stanford plots); overall availability of service – measured as the availability of signals meeting the requirements for instrumented approaches with vertical guidance (APV) APV-1, APV-2, and Category 1 (CAT-1) precision approaches to runways. The main result of this research is developing software that could be applied for continuous monitoring of GNSS performances. The possibilities of it were successfully tested with the help of experimental data received from GPS and Galileo satellites.

scholarly journals Centimeter-Level Recording for All: Field Experimentation with New, Affordable Geolocation Technology

2019 ◽  
Vol 7 (4) ◽  
pp. 353-365 ◽  
Author(s):  
Peter J. Cobb ◽  
Tiffany Earley-Spadoni ◽  
Philip Dames
Keyword(s):  
Spatial Data ◽  
Field Data ◽  
Low Cost ◽  
Field Application ◽  
Global Navigation Satellite Systems ◽  
Precise Location ◽  
Satellite Systems ◽  
Surface Survey ◽  
Field Experimentation ◽  
Global Navigation Satellite

AbstractThe methodical recording and representation of spatial data are central to archaeological fieldwork and research. Until recently, centimeter-level precise geolocation equipment was the exclusive domain of researchers who could afford setups costing tens of thousands of dollars. However, high-quality measurements are being made more accessible by rapidly evolving technologies. These new tools, when used together with mobile technology for efficiently recording field data, open up the possibility of capturing the precise location of every find during an archaeological surface survey. An important step in reaching the desired outcome—centimeter-level recording for all—is experimentation with a variety of emerging low-cost setups. Accordingly, we tested the Reach and Reach RS, differential global navigation satellite systems (dGNSS) equipment produced by the company Emlid, during a surface survey in Armenia in June 2018. Our field application demonstrates that the use of dGNSS is already possible and that the described advances in precision enable improved recording and representation of spatial data.

scholarly journals Low cost GNSS receivers in time synchronization systems

2018 ◽  
Vol 67 (1) ◽  
pp. 65-72
Author(s):  
Grzegorz Czopik ◽  
Tomasz Kraszewski
Keyword(s):  
Time Synchronization ◽  
Low Cost ◽  
Global Navigation Satellite Systems ◽  
Satellite Systems ◽  
Time Frequency ◽  
Delay Times ◽  
Gnss Receivers ◽  
Frequency Counter ◽  
The One ◽  
Global Navigation Satellite

The GNSS (GNSS — Global Navigation Satellite Systems) receivers can be utilized to obtain accurate time markers. The preliminary results of the cheap GNSS receivers’ tests are presented in the paper. The one receiver’s price (including antenna) does not exceed 30 $. The studies on the use of receivers in the time synchronization systems were executed. Three identical models of receiver modules were used. The 1PPS (1PPS — 1 Pulse Per Second) signals available on the receiver’s output were used. The 1PPS’s main time characteristics were described. Delay times between different receivers 1PPS signals were measured. Measurements were taken using 1 GHz oscilloscope and precise time/frequency counter T3200U. Keywords: time synchronization, 1PPS, GNSS, GPS time

scholarly journals GNSS Interference Environment in Malaysia: A Case Study

2021 ◽  
Vol 3 (1) ◽  
pp. 13-16
Author(s):  
Ooi Wei Han ◽  
Shahrizal Ide Moslin ◽  
Wan Aminullah
Keyword(s):  
Public Awareness ◽  
Essential Element ◽  
Global Navigation Satellite Systems ◽  
Space Technology ◽  
Local Study ◽  
Satellite Systems ◽  
Wide Range ◽  
Global Navigation Satellite ◽  
Significant Interference

Global Navigation Satellite Systems or GNSS is a space technology that has become an essential element nowadays for positioning, navigation & timing (PNT) with wide range of applications in many civilian sectors as well as across military. The reliability, accuracy and availability of GNSS are highly important especially for critical and precise positioning applications. However, the signals from space are weak and it can be easily blocked, disrupted or compromised by several other threats including intentional and unintentional interferences or jamming. GPS jammer is widely available off the shelf with an affordable price and capable of interfering the GPS signal, and many authorities worldwide have raised concerns and a lot of efforts and research have been put in place to reduce and mitigate the threats. In Malaysia, understanding and countering threats to GNSS/GPS based applications will be a new and unfamiliar discipline for public and organizations. This study intended to provide an overview of the GNSS interferences environment in a local study area, in terms of interference type and the number of activity pattern that were detected. A system called Detector V1 has been used in this study. The result showed that significant interference cases happened in the study area and some of the high power interferences may impact GNSS tracking and precision of the positioning output. The role objective of having this done is to create a public awareness regarding the threat of GNSS interferences to the local users. The content also includes the proposed initiative to overcome the issue.

Sign in / Sign up

Export Citation Format

Share Document