scholarly journals Low cost GNSS receivers in time synchronization systems

2018 ◽  
Vol 67 (1) ◽  
pp. 65-72
Author(s):  
Grzegorz Czopik ◽  
Tomasz Kraszewski
Keyword(s):  
Time Synchronization ◽  
Low Cost ◽  
Global Navigation Satellite Systems ◽  
Satellite Systems ◽  
Time Frequency ◽  
Delay Times ◽  
Gnss Receivers ◽  
Frequency Counter ◽  
The One ◽  
Global Navigation Satellite

The GNSS (GNSS — Global Navigation Satellite Systems) receivers can be utilized to obtain accurate time markers. The preliminary results of the cheap GNSS receivers’ tests are presented in the paper. The one receiver’s price (including antenna) does not exceed 30 $. The studies on the use of receivers in the time synchronization systems were executed. Three identical models of receiver modules were used. The 1PPS (1PPS — 1 Pulse Per Second) signals available on the receiver’s output were used. The 1PPS’s main time characteristics were described. Delay times between different receivers 1PPS signals were measured. Measurements were taken using 1 GHz oscilloscope and precise time/frequency counter T3200U. Keywords: time synchronization, 1PPS, GNSS, GPS time

scholarly journals A Comparative Analysis of the Response of GNSS Receivers under Vertical and Horizontal L1/E1 Chirp Jamming

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1446
Author(s):  
Polona Pavlovčič-Prešeren ◽  
Franc Dimc ◽  
Matej Bažec
Keyword(s):  
Comparative Analysis ◽  
Low Cost ◽  
Global Navigation Satellite Systems ◽  
Navigation Satellite ◽  
Mass Market ◽  
Satellite Systems ◽  
Sensitivity Range ◽  
Gnss Receivers ◽  
Triangular Area ◽  
Global Navigation Satellite

Jamming is becoming a serious threat to various users of global navigation satellite systems (GNSS). Therefore, live monitoring tests are required to estimate the sensitivity range of GNSS receivers under jamming. This study analyses the response of some mass-market and professional-grade receivers to intentional interferences based on different 3D jammer positions. First, the vertical jamming was investigated, followed by a horizontal experiment where the receivers were placed at three locations while the jammer was moving within a triangular area. The aim was to determine a fingerprint of the influence of the L1/E1 chirp jammer on receivers used in the research. The results show that low-cost receivers are much more susceptible to interference, while the latest generation of GNSS geodetic receivers are much more resilient. It is encouraging that positioning in the presence of jamming could be achieved on a larger scale, especially by using professional receivers. An attempt to position the jammer will be left for trials when a more frequency stable device is applied.

scholarly journals Seamless Vehicle Positioning by Lidar-GNSS Integration: Standalone and Multi-Epoch Scenarios

2021 ◽  
Vol 13 (22) ◽  
pp. 4525
Author(s):  
Junjie Zhang ◽  
Kourosh Khoshelham ◽  
Amir Khodabandeh
Keyword(s):  
Autonomous Driving ◽  
Measurement Model ◽  
Urban Environments ◽  
Global Navigation Satellite Systems ◽  
High Definition ◽  
Satellite Systems ◽  
The Road ◽  
Gnss Receivers ◽  
Vehicle Positioning ◽  
Global Navigation Satellite

Accurate and seamless vehicle positioning is fundamental for autonomous driving tasks in urban environments, requiring the provision of high-end measuring devices. Light Detection and Ranging (lidar) sensors, together with Global Navigation Satellite Systems (GNSS) receivers, are therefore commonly found onboard modern vehicles. In this paper, we propose an integration of lidar and GNSS code measurements at the observation level via a mixed measurement model. An Extended Kalman-Filter (EKF) is implemented to capture the dynamic of the vehicle movement, and thus, to incorporate the vehicle velocity parameters into the measurement model. The lidar positioning component is realized using point cloud registration through a deep neural network, which is aided by a high definition (HD) map comprising accurately georeferenced scans of the road environments. Experiments conducted in a densely built-up environment show that, by exploiting the abundant measurements of GNSS and high accuracy of lidar, the proposed vehicle positioning approach can maintain centimeter-to meter-level accuracy for the entirety of the driving duration in urban canyons.

scholarly journals A Surface KInematics Buoy (SKIB) for wave-current interactions studies

2018 ◽  
Author(s):  
Pedro Veras Guimarães ◽  
Fabrice Ardhuin ◽  
Peter Sutherland ◽  
Mickael Accensi ◽  
Michel Hamon ◽  
...  
Keyword(s):  
Low Cost ◽  
Short Wave ◽  
Global Navigation Satellite Systems ◽  
Motion Sensor ◽  
Satellite Systems ◽  
Ocean Surface Waves ◽  
Sensing Applications ◽  
Hull Design ◽  
Sensor Package ◽  
Global Navigation Satellite

Abstract. Global Navigation Satellite Systems (GNSS) and modern motion-sensor packages allow the measurement of ocean surface waves with low-cost drifters. Drifting along or across current gradients provides unique measurements of wave-current interactions. In this study, we investigate the response of several combinations of GNSS receiver, motion-sensor package and hull design in order to define a prototype surface kinematic buoy (SKIB) that is particularly optimized for measuring wave-current interactions, including relatively short wave components (relative frequency around 1 Hz) that are important for air-sea interactions and remote sensing applications. The comparison with existing Datawell Directional Waverider and SWIFT buoys, as well as stereo-video imagery demonstrates the accuracy of SKIB. The use of low-cost accelerometers and a spherical ribbed and skirted hull design provide acceptable heave spectra, while velocity estimates from GNSS receivers yield a mean direction and directional spread. Using a low-power acquisition board allows autonomous deployments over several months with data transmitted by satellite. The capability to measure current-induced wave variations is illustrated with data acquired in a macro-tidal coastal environment.

scholarly journals Centimeter-Level Recording for All: Field Experimentation with New, Affordable Geolocation Technology

2019 ◽  
Vol 7 (4) ◽  
pp. 353-365 ◽  
Author(s):  
Peter J. Cobb ◽  
Tiffany Earley-Spadoni ◽  
Philip Dames
Keyword(s):  
Spatial Data ◽  
Field Data ◽  
Low Cost ◽  
Field Application ◽  
Global Navigation Satellite Systems ◽  
Precise Location ◽  
Satellite Systems ◽  
Surface Survey ◽  
Field Experimentation ◽  
Global Navigation Satellite

AbstractThe methodical recording and representation of spatial data are central to archaeological fieldwork and research. Until recently, centimeter-level precise geolocation equipment was the exclusive domain of researchers who could afford setups costing tens of thousands of dollars. However, high-quality measurements are being made more accessible by rapidly evolving technologies. These new tools, when used together with mobile technology for efficiently recording field data, open up the possibility of capturing the precise location of every find during an archaeological surface survey. An important step in reaching the desired outcome—centimeter-level recording for all—is experimentation with a variety of emerging low-cost setups. Accordingly, we tested the Reach and Reach RS, differential global navigation satellite systems (dGNSS) equipment produced by the company Emlid, during a surface survey in Armenia in June 2018. Our field application demonstrates that the use of dGNSS is already possible and that the described advances in precision enable improved recording and representation of spatial data.

scholarly journals Performance of Deconvolution Methods in Estimating CBOC-Modulated Signals

2011 ◽  
Vol 2011 ◽  
pp. 1-15 ◽  
Author(s):  
Danai Skournetou ◽  
Ali H. Sayed ◽  
Elena Simona Lohan
Keyword(s):  
Multipath Propagation ◽  
Minimum Mean Square Error ◽  
Global Navigation Satellite Systems ◽  
Performance Limit ◽  
Satellite Systems ◽  
Phase Code ◽  
Multipath Signal ◽  
The One ◽  
Unknown Parameter Vector ◽  
Global Navigation Satellite

Multipath propagation is one of the most difficult error sources to compensate in global navigation satellite systems due to its environment-specific nature. In order to gain a better understanding of its impact on the received signal, the establishment of a theoretical performance limit can be of great assistance. In this paper, we derive the Cramer Rao lower bounds (CRLBs), where in one case, the unknown parameter vector corresponds to any of the three multipath signal parameters of carrier phase, code delay, and amplitude, and in the second case, all possible combinations of joint parameter estimation are considered. Furthermore, we study how various channel parameters affect the computed CRLBs, and we use these bounds to compare the performance of three deconvolution methods: least squares, minimum mean square error, and projection onto convex space. In all our simulations, we employ CBOC modulation, which is the one selected for future Galileo E1 signals.

scholarly journals Linear and Nonlinear Deformation Effects in the Permanent GNSS Network of Cyprus

Sensors ◽  
2020 ◽  
Vol 20 (6) ◽  
pp. 1768
Author(s):  
Chris Danezis ◽  
Miltiadis Chatzinikos ◽  
Christopher Kotsakis
Keyword(s):  
Crustal Deformation ◽  
Global Navigation Satellite Systems ◽  
Satellite Systems ◽  
Time Period ◽  
Position Time Series ◽  
Gnss Receivers ◽  
Linear And Nonlinear ◽  
Gnss Network ◽  
Global Navigation Satellite ◽  
Gnss Data

Permanent Global Navigation Satellite Systems (GNSS) reference stations are well established as a powerful tool for the estimation of deformation induced by man-made or physical processes. GNSS sensors are successfully used to determine positions and velocities over a specified time period, with unprecedented accuracy, promoting research in many safety-critical areas, such as geophysics and geo-tectonics, tackling problems that torment traditional equipment and providing deformation products with absolute accuracy. Cyprus, being located at the Mediterranean fault, exhibits a very interesting geodynamic regime, which has yet to be investigated thoroughly. Accordingly, this research revolves around the estimation of crustal deformation in Cyprus using GNSS receivers. CYPOS (CYprus POsitioning System), a network of seven permanent GNSS stations has been operating since 2008, under the responsibility of the Department of Lands and Surveys. The continuous flow of positioning data collected over this network, offers the required information to investigate the behavior of the crustal deformation field of Cyprus using GNSS sensors for the first time. This paper presents the results of a multi-year analysis (11/2011–01/2017) of daily GNSS data and provides inferences of linear and nonlinear deforming signals into the position time series of the network stations. Specifically, 3D station velocities and seasonal periodic displacements are jointly estimated and presented via a data stacking approach with respect to the IGb08 reference frame.

scholarly journals Enhanced Drone Navigation in GNSS Denied Environment Using VDM and Hall Effect Sensor

2019 ◽  
Vol 8 (4) ◽  
pp. 169 ◽  
Author(s):  
Shady Zahran ◽  
Adel Moussa ◽  
Naser El-Sheimy
Keyword(s):  
Hall Effect ◽  
Low Cost ◽  
Integrated System ◽  
Global Navigation Satellite Systems ◽  
Satellite Systems ◽  
Hall Effect Sensor ◽  
Aerial Vehicle ◽  
Heading Estimation ◽  
Global Navigation Satellite ◽  
Vehicle Dynamic Model

The last decade has witnessed a wide spread of small drones in many civil and military applications. With the massive advancement in the manufacture of small and lightweight Inertial Navigation System (INS), navigation in challenging environments became feasible. Navigation of these small drones mainly depends on the integration of Global Navigation Satellite Systems (GNSS) and INS. However, the navigation performance of these small drones deteriorates quickly when the GNSS signals are lost, due to accumulated errors of the low-cost INS that is typically used in these drones. During GNSS signal outages, another aiding sensor is required to bound the drift exhibited by the INS. Before adding any additional sensor on-board the drones, there are some limitations that must be taken into considerations. These limitations include limited availability of power, space, weight, and size. This paper presents a novel unconventional method, to enhance the navigation of autonomous drones in GNSS denied environment, through a new utilization of hall effect sensor to act as flying odometer “Air-Odo” and vehicle dynamic model (VDM) for heading estimation. The proposed approach enhances the navigational solution by estimating the unmanned aerial vehicle (UAV) velocity, and heading and fusing these measurements in the Extended Kalman Filter (EKF) of the integrated system.

scholarly journals New GNSS tomography of the atmosphere method – proposal and testing

2012 ◽  
Vol 9 ◽  
pp. 63-76 ◽  
Author(s):  
Michal Kačmařík ◽  
Lukáš Rapant
Keyword(s):  
Water Vapour ◽  
Theoretical Concept ◽  
Global Navigation Satellite Systems ◽  
Satellite Systems ◽  
Gnss Meteorology ◽  
Gnss Receivers ◽  
Tomography Method ◽  
Gnss Measurements ◽  
Global Navigation Satellite

Paper is focused on GNSS meteorology which is generally used for the determination of water vapour distribution in the atmosphere from GNSS measurements. Water vapour in the atmosphere is an important parameter which influences the state and development of the weather. At first, the paper presents basics of the GNSS meteorology and tomography of the atmosphere and subsequently introduces a new GNSS tomography method which doesn't require an extensive network of GNSS receivers, but uses only a few receivers situated in a line. After a theoretical concept describing this method and used mathematical background, the results from a real experiment are shown and discussed. Unfortunately the results indicate that presented method is not able to provide credible outputs. Possibly the main problem lies in an insufficient number of available signals from current global navigation satellite systems (GPS and GLONASS) where the improvement could be expected after the start of Galileo and Compass. Potential ways how to improve the results without increasing the number of satellites are outlined in the last section.

Sign in / Sign up

Export Citation Format

Share Document