Relevancy of Nizatidine Release from Floating Tablets with Viscosity of Various Cellulose Ethers

Sci ◽  
2019 ◽  
Vol 1 (1) ◽  
pp. 22 ◽  
Author(s):  
Yasser Shahzad ◽  
Namra Ibrar ◽  
Talib Hussain ◽  
Abid Mehmood Yousaf ◽  
Ikram Ullah Khan ◽  
...  
Keyword(s):  
Drug Release ◽  
Fickian Diffusion ◽  
In Vitro Dissolution ◽  
Release Mechanism ◽  
Cellulose Ethers ◽  
Polymer Backbone ◽  
Floating Tablets ◽  
The Matrix ◽  
The Difference

Nizatidine is a gastroprotective drug with a short biological half-life and narrow absorption window. This study aimed at developing floating tablets of nizatidine using various HPMC viscosity grades, namely K4M, E4M, K15 and K200M. Directly compressed tablets revealed an excellent uniformity in hardness, thickness and weight and nizatidine was evenly distributed within the matrix floating tablets. Buoyancy study revealed floating lag time as low as 18–38 s, and tablets remain buoyant for upto 24 h. However, the later depended upon viscosity grade of HPMC and that the higher the viscosity, the less was the total floating time. In vitro dissolution indicated viscosity dependent nizatidine release from the floating tablets. HPMC K4M and E4M based floating tablets released almost 100% drug in 12 h, whilst higher viscosity polymers such as K15 and K200M only released 81.88% and 75.81% drug, respectively. The drug release followed non-Fickian diffusion from tablets formulated with K4M, K15 and K200M, whilst super case II transport was observed with E4M based tablets. More interestingly, K4M and E4M polymers have similar viscosity yet exhibited different drug release mechanism. This was attributed to the difference in degree of substitution of methoxyl- and hydroxypropoxyl- groups on polymer backbone.

scholarly journals Relevancy of Nizatidine’s Release from Floating Tablets with Viscosity of Various Cellulose Ethers

Sci ◽  
2021 ◽  
Vol 3 (2) ◽  
pp. 22
Author(s):  
Yasser Shahzad ◽  
Namra Ibrar ◽  
Talib Hussain ◽  
Abid Mehmood Yousaf ◽  
Ikram Ullah Khan ◽  
...  
Keyword(s):  
Drug Release ◽  
Fickian Diffusion ◽  
In Vitro Dissolution ◽  
Release Mechanism ◽  
Cellulose Ethers ◽  
Polymer Backbone ◽  
Floating Tablets ◽  
The Matrix ◽  
The Difference

Nizatidine is a gastroprotective drug with a short biological half-life and narrow absorption window. This study aimed at developing floating tablets of nizatidine using various HPMC viscosity grades, namely K4M, E4M, K15 and K200M. Directly compressed tablets revealed an excellent uniformity in hardness, thickness and weight and nizatidine was evenly distributed within the matrix floating tablets. Buoyancy study revealed floating lag time as low as 18–38 s, and tablets remain buoyant for upto 24 h. However, the later depended upon viscosity grade of HPMC and that the higher the viscosity, the less was the total floating time. In vitro dissolution indicated viscosity dependent nizatidine release from the floating tablets. HPMC K4M and E4M based floating tablets released almost 100% drug in 12 h, whilst higher viscosity polymers such as K15 and K200M only released 81.88% and 75.81% drug, respectively. The drug release followed non-Fickian diffusion from tablets formulated with K4M, K15 and K200M, whilst super case II transport was observed with E4M based tablets. More interestingly, K4M and E4M polymers have similar viscosity yet exhibited different drug release mechanism. This was attributed to the difference in degree of substitution of methoxyl- and hydroxypropoxyl- groups on polymer backbone.

scholarly journals DESIGN AND CHARACTERISATION OF TRANSDERMAL PATCHES OF PHENFORMIN HYDROCHLORIDE

2017 ◽  
Vol 9 (6) ◽  
pp. 90
Author(s):  
Pratik Swarup Das ◽  
Puja Saha
Keyword(s):  
Drug Release ◽  
Diffusion Mechanism ◽  
Skin Irritation ◽  
In Vitro Release ◽  
Chemical Properties ◽  
In Vitro Dissolution ◽  
Release Mechanism ◽  
Transdermal Patches ◽  
The Matrix

Objective: In present work was designed to develop suitable transdermal matrix patches of Phenformin hydrochloride using various hydrophilic (HPMC) and hydrophobic (EUDRAGID) polymers as matrix formers.Methods: Transdermal patches containing Phenformin hydrochloride were prepared by the solvent casting evaporation technique.Results: Revealed that prepared patches showed good physical characteristics, no drug-polymer interaction and no skin irritation was observed. The in vitro release study revealed that F3 formulation showed maximum release in 24 h. Formulation F3 was subjected for accelerated stability studies. The F3 formulation was found to be stable as there was no drastic change in the Physico-chemical properties of the patches, which was also confirmed by FTIR.Conclusion: Thus conclusion can be made that stable transdermal patches of Phenformin hydrochloride has been developed. F1, F2, F3, F4 formulations showed highest cumulative percentage drug release of 98.13%, 95.50%, 98.65%, 97.21% were obtained during in vitro drug release studies after 24 h. The release of Phenformin hydrochloride appears to be dependent on lipophilicity of the matrix. Moderately lipophillic matrices showed best release. The predominant release mechanism of drug through the fabricated matrices was believed to be by diffusion mechanism. Based upon the in vitro dissolution data the F3 formulation was concluded as optimized formulation.

scholarly journals 5-Fluorouracil Release from Chitosan-Based Matrix.Experimental and Theoretical Aspects

2020 ◽  
Vol 57 (3) ◽  
pp. 180-188
Author(s):  
Roxana Iancu ◽  
Stefan Andrei Irimiciuc ◽  
Maricel Agop ◽  
Mihail Frasila ◽  
Maria-Alexandra Paun ◽  
...  
Keyword(s):  
Drug Release ◽  
Polarized Light ◽  
Crosslinking Density ◽  
Fickian Diffusion ◽  
Release Mechanism ◽  
Morphological Aspects ◽  
Drug Release Mechanism ◽  
The Matrix

A series of four drug release formulations based on 5-fluorouracil encapsulated into a chitosan-based matrix were prepared by in situ hydrogelation with 3,7-dimethyl-2,6-octadienal. The formulations were investigated from structural and morphological aspects by FTIR spectroscopy, polarized light microscopy and scanning electron microscopy. It was established that 5-fluorouracil was anchored into the matrix as crystals, whose dimension varied as a function of the crosslinking density. The in vitro drug release simulated into a media mimicking the physiological environment revealed a progressive release of the 5-fluorouracil, in close interdependence with the crosslinking density. In the context of Pharmacokinetics behavioral analysis, a new mathematical procedure for describing drug release dynamics in polymer-drug complex system is proposed. Assuming that the dynamics of polymer-drug system�s structural units take place on continuous and nondifferentiable curves (multifractal curves), we show that in a one-dimensional hydrodynamic formalism of multifractal variables the drug release mechanism (Fickian diffusion, non-Fickian diffusion, etc) are given through synchronous dynamics at a differentiable and non-differentiable scale resolutions. Finally, the model is confirmed by the empirical data.

scholarly journals Development and evaluation of gastroretentive norfloxacin floating tablets

2009 ◽  
Vol 59 (2) ◽  
pp. 211-221 ◽  
Author(s):  
Ramesh Bomma ◽  
Rongala Swamy Naidu ◽  
Madhusudan Yamsani ◽  
Kishan Veerabrahma
Keyword(s):  
Drug Release ◽  
Hydroxypropyl Methylcellulose ◽  
Matrix Tablets ◽  
Fickian Diffusion ◽  
Release Mechanism ◽  
Wet Granulation ◽  
Drug Bioavailability ◽  
Floating Tablets

Development and evaluation of gastroretentive norfloxacin floating tabletsFloating matrix tablets of norfloxacin were developed to prolong gastric residence time, leading to an increase in drug bioavailability. Tablets were prepared by the wet granulation technique, using polymers such as hydroxypropyl methylcellulose (HPMC K4M, HPMC K100M) and xanthan gum. Tablets were evaluated for their physical characteristics,viz., hardness, thickness, friability, and mass variation, drug content and floating properties. Further, tablets were studied forin vitrodrug release characteristics for 9 hours. The tablets exhibited controlled and prolonged drug release profiles while floating over the dissolution medium. Non-Fickian diffusion was confirmed as the drug release mechanism from these tablets, indicating that water diffusion and polymer rearrangement played an essential role in drug release. The best formulation (F4) was selected based onin vitrocharacteristics and was usedin vivoradiographic studies by incorporating BaSO4. These studies revealed that the tablets remained in the stomach for 180 ± 30 min in fasting human volunteers and indicated that gastric retention time was increased by the floating principle, which was considered desirable for the absorption window drugs.

scholarly journals DEVELOPMENT, FORMULATION AND EVALUATION OF A BILAYER GASTRIC RETENTIVE FLOATING TABLETS OF RANITIDINE HCL AND CLARITHROMYCIN USING NATURAL POLYMERS

2017 ◽  
Vol 9 (9) ◽  
pp. 164
Author(s):  
Saripilli Rajeswari ◽  
Sravya Kudamala ◽  
Kollapalli Venkata Ramana Murthy
Keyword(s):  
Drug Release ◽  
Fickian Diffusion ◽  
In Vitro Dissolution ◽  
Natural Polymers ◽  
Drug Bioavailability ◽  
Floating Tablets ◽  
First Order ◽  
Order Rate ◽  
Rate Kinetics

Objective: Bilayer gastric retentive floating tablets (BGRFT) with ranitidine HCl and clarithromycin using natural gums have been developed to prolong the gastric residence time and increase drug bioavailability. Literature review revealed no published studies on the present study.Methods: Immediate release (IR) layer prepared by using different diluents and super disintegrants like sodium starch glycolate, crosscarmellose sodium and crospovidone. Controlled released (CR) layer prepared by using neem gum, damar gum and copal gum. Prepared tablets were evaluated for in vivo and in vitro buoyancy, in vitro dissolution studies and fourier transformation-infrared spectroscopy (FTIR). Drug release was evaluated with zero and first order for release kinetics, Higuchi, Hixson-Crowell erosion models for release mechanism.Results: Prepared IR layer followed first order rate kinetics and CR layer followed zero order rate kinetics with non-Fickian diffusion mechanism. BGRFT also showed similar results as that of the individual layer. Optimized formulations were characterized by FTIR studies and found no interactions between drug and polymer.Conclusion: The results demonstrate the feasibility of the model in the development of BGRFT. BGRFT enhanced the drug release and finally the bioavailability of clarithromycin when compared with commercial tablet (Biomycin 250). The present study could establish the suitability of neem gum as CR polymer in the design of BGRFT.

Transdermal patch, co-loaded with Pregabalin and Ketoprofen for improved bioavailability; in vitro studies

2021 ◽  
pp. 096739112110045
Author(s):  
Nida Shafique ◽  
Tuba Siddiqui ◽  
Muhammad Zaman ◽  
Zoya Iqbal ◽  
Shahid Rasool ◽  
...  
Keyword(s):  
Drug Release ◽  
Diffusion Mechanism ◽  
Controlled Drug Release ◽  
In Vitro Dissolution ◽  
Release Mechanism ◽  
Transdermal Drug Delivery System ◽  
Hydrophobic Polymers ◽  
The Matrix ◽  
Permeation Studies

The current study was aimed to fabricate a transdermal drug delivery system (TDDS) containing Ketoprofen (KTF) and Pregabalin (PGB) for controlled drug release, avoidance of the first-pass metabolism, and increased patient compliance. TDDS of KTF and PGB were formulated using the solvent casting method. Various ratios of hydrophilic polymer (HPMC) and hydrophobic polymers (Eudragit L-100 and Ethyl Cellulose) were employed for the formulation of transdermal patches. PG and oleic acid were used as a permeation enhancer, and PEG-400 was employed as a plasticizer. Surface morphology has confirmed the uniform distribution of drugs throughout the matrix and the excellent compatibility of the selected ingredients. All the formulation showed folding endurance of more than 300, which exhibited that all patches have suitable mechanical strength. One hundred percent flatness also showed good stability of the patches and suitability of the selected ingredients. In vitro drug permeation studies showed more than 97% and 95% release of PGB and KTF, respectively, during the in vitro dissolution studies. The drug release mechanism investigated with various kinetic models exhibited that the rate of drug release was not dependent on initial concentrations of the drug present in the patches and was following the drug diffusion mechanism.

scholarly journals DESIGN AND DEVELOPMENT OF LOSARTAN POTASSIUM FLOATING DRUG DELIVERY SYSTEMS

2018 ◽  
Vol 10 (6) ◽  
pp. 168
Author(s):  
Prasanta Kumar Mohapatra ◽  
Ch. Prathibha ◽  
Vivek Tomer ◽  
Mandeep Kumar Gupta ◽  
Satyajit Sahoo
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Angle Of Repose ◽  
Losartan Potassium ◽  
Fickian Diffusion ◽  
In Vitro Dissolution ◽  
Release Mechanism ◽  
In Vitro Drug Release ◽  
Dissolution Studies

Objective: The current study was projected to prepare a losartan potassium gastroretentive drug delivery system (GRDDS) of floating tablets was planned to enhance the gastric residence time, thus prolong the drug release.Methods: Effervescent floating matrix tablets of losartan potassium were prepared by direct compression technique using polymers like HPMC k4m, guar gum, and gum karaya, with lubricants magnesium stearate and talc. In the present study, sodium bicarbonate was incorporated as a gas generating agent. Total nine formulations were designed and evaluated for pre-compression parameters known as the angle of repose, bulk density, tapped density, Hausner’s ratio, compressibility index, and post-compression parameters are uniformity of weight, hardness, and drug content percentage, variability, in vitro buoyancy, dissolution studies, and Fourier transform infrared spectroscopy (FTIR).Results: An in vitro dissolution study was carried out by using buffer pH 1.2. From in vitro dissolution studies, it has been found that an increase in polymer concentration diminishes the drug release profile. The in vitro drug release percentage from F4-F9 formulations ranged from 60.28%-98.66% at the closing of 12 h and buoyancy found over 12 h.Conclusion: The in vitro drug release from F1-F3 and F7-F9 followed zero-order, F4 followed Higuchi order, F5 and F6 followed Hixon-Crowell release kinetics. The drug release mechanism was set up to be F1-F8 non-Fickian (anomalous behavior) and F9 having Fickian diffusion type.

scholarly journals Formulation and evaluation of bi-layer floating tablets of ziprasidone HCl and trihexyphenidyl HCl

2011 ◽  
Vol 47 (3) ◽  
pp. 545-553 ◽  
Author(s):  
Sathis Kumar Dinakaran ◽  
Santhos Kumar ◽  
David Banji ◽  
Harani Avasarala ◽  
Venkateshwar Rao
Keyword(s):  
Sustained Release ◽  
In Vitro Release ◽  
Chemical Properties ◽  
Matrix Tablets ◽  
In Vitro Dissolution ◽  
Floating Tablets ◽  
Ir Studies ◽  
Weight Variation ◽  
The Matrix

The purpose of this research study was to establish ziprasidone HCl NR 40 mg and trihexyphenidyl HCl SR 4mg in the form of bi-layer sustained release floating tablets. The tablets were prepared using sodium HPMC K4M / HPMC K15M as bio-adhesive polymers and sodium bicarbonate acting as a floating layer. Tablets were evaluated based on different parameters such as thickness, hardness, friability, weight variation, in vitro dissolution studies, content of active ingredient and IR studies. The physico-chemical properties of the finished product complied with the specifications. In vitro release from the formulation was studied as per the USP XXIII dissolution procedure. The formulations gave a normal release effect followed by sustained release for 12 h which indicates bimodal release of ziprasidone HCl from the matrix tablets. The data obtained was fitted to Peppas models. Analysis of n values of the Korsmeyer equation indicated that the drug release involved non-diffusional mechanisms. By the present study, it can be concluded that bi-layer tablets of ziprasidone HCl and trihexyphenidyl HCl will be a useful strategy for extending the metabolism and improving the bioavailability of Ziprasidone HCl and Trihexyphenidyl HCl.

DESIGN AND CHARACTERIZATION OF ALFUZOSIN HCL GASTRORETENTIVE FLOATING MATRIX TABLETS EMPLOYING HPMC K 100M

INDIAN DRUGS ◽  
2018 ◽  
Vol 55 (11) ◽  
pp. 71-73
Author(s):  
Ch. Taraka Ramarao ◽  
◽  
J Vijaya Ratna ◽  
R. B. Srinivasa
Keyword(s):  
Drug Release ◽  
Dosage Forms ◽  
Matrix Tablets ◽  
Fickian Diffusion ◽  
Release Mechanism ◽  
Gastric Residence Time ◽  
Drug Release Mechanism ◽  
The Matrix ◽  
Gastro Retentive

The present investigation involves developing gastro retentive drug delivery systems (GFDDS) of alfuzosin HCl using HPMCK100M a is the matrixing agent and floating enhancer. Sodium bicarbonate in the acidic environment reacts with the acid and produces carbon dioxide. The gastro retentive tablets can be formulated to increase the gastric residence time and thereby increase the oral bioavailability. From the drug release study, it was concluded that the AFTB4 formula of HPMC K 100 M matrix tablets gives the controlled release up to 12 hours by showing increased release with floating lag time 24 seconds. Non – Fickian diffusion was the drug release mechanism from the matrix tablets formulated employing HPMC K 100 M. The matrix tablets (AFTB4) formulated employing 40 % HPMC K 100 M are best suited to be used for gastro retentive dosage form of alfuzosin HCl. Finally, it can be concluded that good candidates for the preparation of gastro retentive dosage forms due its gastric stability, gastric absorption and better bioavailability.

scholarly journals Formulation and In Vitro Evaluation of Sustained Release Floating Matrix Tablet of Levofloxacin by Direct Compression Method

2019 ◽  
Vol 9 (4-s) ◽  
pp. 398-403
Author(s):  
Nidhi Kumari Pandey ◽  
Sailesh Kumar Ghatuary ◽  
Amit Dubey ◽  
Prabhat Kumar Jain
Keyword(s):  
Drug Release ◽  
Acute Infection ◽  
Methyl Cellulose ◽  
In Vitro Dissolution ◽  
Release Mechanism ◽  
Matrix Tablet ◽  
Direct Compression ◽  
Compression Method ◽  
Weight Variation

The objective of the present work was to develop Gastro retentive dosage forms which would remain in the stomach and upper part or GIT for a prolonged period of time thereby maximizing the drug release at desired site within the time before GRDFs left the stomach and upper part of the GIT, has provoked a great deal of increased interest in the formulation of such drug as floating drug delivery systems. Levofloxacin, (BCS class I) is a fluoroquinolone anti-bacterial agent. The rationale for the formulation of floating matrix tablet are acidic solubility of levofloxacin, residence of Halicobactor pylori mainly in sub region of stomach and the overdosing associated adverse effect due to continuous intake of drug in acute infection. A simple visible spectrophotometric method was employed for the estimation of levofloxacin at 294 nm and Beer’s law is obeyed in the concentration range of 2-10 μg /ml. Floating matrix tablet of levofloxacin was prepared by direct compression method using different polymers like hydroxyl propyl methyl cellulose (HPMC K4) and carbopol 934 as matrix formation polymers, sodium bicarbonate and citric acid was used as gas generating agents. The FTIR spectra of the levofloxacin and other excipients alone and in combination show the compatibility of the drug and excipients. Six formulations of different polymer percentages were formulated (F1-F6). Pre-compression parameters were evaluated. The influence of matrix forming agents and binary mixtures of them on levofloxacin release was investigated. The formulated tablets were characterized by hardness, friability, thickness, weight variation and in vitro drug release. The formulated tablets had acceptable physicochemical characters. The data obtained from the in-vitro dissolution studies of optimized batch F4were fitted in different models. The optimized formulation F4 showed 99.25% drug content and swelling index of 79.85 %. Drug release mechanism was found to be first order kinetics. Levofloxacin floating tablets exhibited increased gastric residence time, there by improved bioavailability and therapeutic effect of the drug.  

Sign in / Sign up

Export Citation Format

Share Document