scholarly journals DEVELOPMENT, FORMULATION AND EVALUATION OF A BILAYER GASTRIC RETENTIVE FLOATING TABLETS OF RANITIDINE HCL AND CLARITHROMYCIN USING NATURAL POLYMERS

2017 ◽  
Vol 9 (9) ◽  
pp. 164
Author(s):  
Saripilli Rajeswari ◽  
Sravya Kudamala ◽  
Kollapalli Venkata Ramana Murthy
Keyword(s):  
Drug Release ◽  
Fickian Diffusion ◽  
In Vitro Dissolution ◽  
Natural Polymers ◽  
Drug Bioavailability ◽  
Floating Tablets ◽  
First Order ◽  
Order Rate ◽  
Rate Kinetics

Objective: Bilayer gastric retentive floating tablets (BGRFT) with ranitidine HCl and clarithromycin using natural gums have been developed to prolong the gastric residence time and increase drug bioavailability. Literature review revealed no published studies on the present study.Methods: Immediate release (IR) layer prepared by using different diluents and super disintegrants like sodium starch glycolate, crosscarmellose sodium and crospovidone. Controlled released (CR) layer prepared by using neem gum, damar gum and copal gum. Prepared tablets were evaluated for in vivo and in vitro buoyancy, in vitro dissolution studies and fourier transformation-infrared spectroscopy (FTIR). Drug release was evaluated with zero and first order for release kinetics, Higuchi, Hixson-Crowell erosion models for release mechanism.Results: Prepared IR layer followed first order rate kinetics and CR layer followed zero order rate kinetics with non-Fickian diffusion mechanism. BGRFT also showed similar results as that of the individual layer. Optimized formulations were characterized by FTIR studies and found no interactions between drug and polymer.Conclusion: The results demonstrate the feasibility of the model in the development of BGRFT. BGRFT enhanced the drug release and finally the bioavailability of clarithromycin when compared with commercial tablet (Biomycin 250). The present study could establish the suitability of neem gum as CR polymer in the design of BGRFT.

scholarly journals Development and evaluation of gastroretentive norfloxacin floating tablets

2009 ◽  
Vol 59 (2) ◽  
pp. 211-221 ◽  
Author(s):  
Ramesh Bomma ◽  
Rongala Swamy Naidu ◽  
Madhusudan Yamsani ◽  
Kishan Veerabrahma
Keyword(s):  
Drug Release ◽  
Hydroxypropyl Methylcellulose ◽  
Matrix Tablets ◽  
Fickian Diffusion ◽  
Release Mechanism ◽  
Wet Granulation ◽  
Drug Bioavailability ◽  
Floating Tablets

Development and evaluation of gastroretentive norfloxacin floating tabletsFloating matrix tablets of norfloxacin were developed to prolong gastric residence time, leading to an increase in drug bioavailability. Tablets were prepared by the wet granulation technique, using polymers such as hydroxypropyl methylcellulose (HPMC K4M, HPMC K100M) and xanthan gum. Tablets were evaluated for their physical characteristics,viz., hardness, thickness, friability, and mass variation, drug content and floating properties. Further, tablets were studied forin vitrodrug release characteristics for 9 hours. The tablets exhibited controlled and prolonged drug release profiles while floating over the dissolution medium. Non-Fickian diffusion was confirmed as the drug release mechanism from these tablets, indicating that water diffusion and polymer rearrangement played an essential role in drug release. The best formulation (F4) was selected based onin vitrocharacteristics and was usedin vivoradiographic studies by incorporating BaSO4. These studies revealed that the tablets remained in the stomach for 180 ± 30 min in fasting human volunteers and indicated that gastric retention time was increased by the floating principle, which was considered desirable for the absorption window drugs.

Relevancy of Nizatidine Release from Floating Tablets with Viscosity of Various Cellulose Ethers

Sci ◽  
2019 ◽  
Vol 1 (1) ◽  
pp. 22 ◽  
Author(s):  
Yasser Shahzad ◽  
Namra Ibrar ◽  
Talib Hussain ◽  
Abid Mehmood Yousaf ◽  
Ikram Ullah Khan ◽  
...  
Keyword(s):  
Drug Release ◽  
Fickian Diffusion ◽  
In Vitro Dissolution ◽  
Release Mechanism ◽  
Cellulose Ethers ◽  
Polymer Backbone ◽  
Floating Tablets ◽  
The Matrix ◽  
The Difference

Nizatidine is a gastroprotective drug with a short biological half-life and narrow absorption window. This study aimed at developing floating tablets of nizatidine using various HPMC viscosity grades, namely K4M, E4M, K15 and K200M. Directly compressed tablets revealed an excellent uniformity in hardness, thickness and weight and nizatidine was evenly distributed within the matrix floating tablets. Buoyancy study revealed floating lag time as low as 18–38 s, and tablets remain buoyant for upto 24 h. However, the later depended upon viscosity grade of HPMC and that the higher the viscosity, the less was the total floating time. In vitro dissolution indicated viscosity dependent nizatidine release from the floating tablets. HPMC K4M and E4M based floating tablets released almost 100% drug in 12 h, whilst higher viscosity polymers such as K15 and K200M only released 81.88% and 75.81% drug, respectively. The drug release followed non-Fickian diffusion from tablets formulated with K4M, K15 and K200M, whilst super case II transport was observed with E4M based tablets. More interestingly, K4M and E4M polymers have similar viscosity yet exhibited different drug release mechanism. This was attributed to the difference in degree of substitution of methoxyl- and hydroxypropoxyl- groups on polymer backbone.

scholarly journals Relevancy of Nizatidine’s Release from Floating Tablets with Viscosity of Various Cellulose Ethers

Sci ◽  
2021 ◽  
Vol 3 (2) ◽  
pp. 22
Author(s):  
Yasser Shahzad ◽  
Namra Ibrar ◽  
Talib Hussain ◽  
Abid Mehmood Yousaf ◽  
Ikram Ullah Khan ◽  
...  
Keyword(s):  
Drug Release ◽  
Fickian Diffusion ◽  
In Vitro Dissolution ◽  
Release Mechanism ◽  
Cellulose Ethers ◽  
Polymer Backbone ◽  
Floating Tablets ◽  
The Matrix ◽  
The Difference

Nizatidine is a gastroprotective drug with a short biological half-life and narrow absorption window. This study aimed at developing floating tablets of nizatidine using various HPMC viscosity grades, namely K4M, E4M, K15 and K200M. Directly compressed tablets revealed an excellent uniformity in hardness, thickness and weight and nizatidine was evenly distributed within the matrix floating tablets. Buoyancy study revealed floating lag time as low as 18–38 s, and tablets remain buoyant for upto 24 h. However, the later depended upon viscosity grade of HPMC and that the higher the viscosity, the less was the total floating time. In vitro dissolution indicated viscosity dependent nizatidine release from the floating tablets. HPMC K4M and E4M based floating tablets released almost 100% drug in 12 h, whilst higher viscosity polymers such as K15 and K200M only released 81.88% and 75.81% drug, respectively. The drug release followed non-Fickian diffusion from tablets formulated with K4M, K15 and K200M, whilst super case II transport was observed with E4M based tablets. More interestingly, K4M and E4M polymers have similar viscosity yet exhibited different drug release mechanism. This was attributed to the difference in degree of substitution of methoxyl- and hydroxypropoxyl- groups on polymer backbone.

Preparation and Evaluation of Gemifloxacin Mesylate Floating Matrix Tablets in Healthy Human Volunteers

2017 ◽  
Vol 10 (1) ◽  
pp. 3623-3630
Author(s):  
Bhikshapathi D. V. R. N. ◽  
Haarika B ◽  
Jyothi Sri S ◽  
K Abbulu
Keyword(s):  
Drug Release ◽  
Sodium Bicarbonate ◽  
Polymer Concentration ◽  
Hydroxypropyl Methylcellulose ◽  
Matrix Tablets ◽  
Physical Parameters ◽  
Drug Bioavailability ◽  
Floating Tablets

The purpose of present investigation was to develop floating matrix tablets of gemifloxacin mesylate, which after oral administration could prolong the gastric residence time, increase the drug bioavailability and diminish the side effects of irritating drugs. Tablets containing drug, various viscosity grades of hydroxypropyl methylcellulose such as HPMC K4M and HPMC K15M as matrix forming agent, Sodium bicarbonate as gas-forming agent and different additives were tested for their usefulness in formulating gastric floating tablets by direct compression method. The physical parameters, in vitro buoyancy, release characteristics and in vivo radiographic study were investigated in this study. The gemifloxacin mesylate floating tablets were prepared using HPMC K4M polymer giving more sustained drug release than the tablet containing HPMC K15M. All these formulations showed floating lag time of 30 to 47 sec and total floating time more than 12 h. The drug release was decreased when polymer concentration increases and gas generating agent decreases. Formulation that contains maximum concen-tration of both HPMC K15M and sodium bicarbonate (F9) showing sufficiently sustained with 99.2% of drug release at 12 h. The drug release from optimized formulation follows Higuchi model that indicates the diffusion controlled release. The best formulation (F9) was selected based on in vitro characteristics and used in vivo radiographic studies by incorporating barium sulphate as a radio-opaque agent and the tablet remained in the stomach for about 6 h.   

scholarly journals In Vitro Release Kinetics Study of Different Brands of Esomeprazole Sustained Release Tablets Available in Bangladesh

1970 ◽  
Vol 2 (1) ◽  
pp. 27-31 ◽  
Author(s):  
Abul Kalam Lutful Kabir ◽  
Tasbira Jesmeen ◽  
Md Mesbah Uddin Talukder ◽  
Abu Taher Md Rajib ◽  
DM Mizanur Rahman
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Release Kinetics ◽  
Matrix Tablets ◽  
In Vitro Dissolution ◽  
National Brand ◽  
First Order ◽  
Time Period ◽  
Esomeprazole Magnesium

Commercially available four national and four international brands of esomeprazole magnesium sustained release matrix tablets were studied in simulated gastric medium (pH 1.2) for 2 hours and simulated intestinal medium (pH 6.8) for 8 hours time period using USP reference dissolution apparatus. All the national and international brands complied with the USP in-vitro dissolution specifications for drug release in simulated gastric medium. However, one of the national brands (Code: MP-1) and one of the international brands (MP-7) failed to fulfill the official requirement of 80% drug release within 8th hour in simulated intestinal medium. Drug release of that national and international brand were 70.49% and 67.05% respectively within the specified time period, however one national brand (Code: MP-4) released 103.46 % drug within 8th hour in intestinal medium. Drug release profiles were analyzed for zero order, first order and Higuchi equation to reveal the release kinetics perspective of esomeprazole magnesium sustained release matrix tablets. It was found that zero order release kinetics was the predominant release mechanism than first order and Higuchi release kinetics for those brands (Code: MP-2, MP-3, MP-4, MP-5, MP-6 and MP-8) which complied with the USP in vitro dissolution specification for drug releases. On the other hand, first order release kinetics was predominant for one national and also one international non compliant brands (Code: MP-1 and MP-6). Key Words: In vitro dissolution; Sustained release; Market preparations; Kinetic analysis; Esomeprazole; National brand; International brand. DOI: 10.3329/sjps.v2i1.5812Stamford Journal of Pharmaceutical Sciences Vol.2(1) 2009: 27-31

scholarly journals FORMULATION AND EVALUATION OF SUSTAINED RELEASE MATRIX TABLETS OF LEVOSULPIRIDE BY USING NATURAL POLYMER

2017 ◽  
Vol 10 (5) ◽  
pp. 285
Author(s):  
S Shanmugam
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Xanthan Gum ◽  
Diffusion Mechanism ◽  
Matrix Tablets ◽  
In Vitro Dissolution ◽  
Release Kinetic ◽  
Natural Polymers ◽  
In Vitro Drug Release

Objective: The objective of the present study was to develop sustained release matrix tablets of levosulpiride by using natural polymers.Method: The tablets were prepared with different ratios of Chitosan, Xanthan gum and Guar gum by wet granulation technique. The solubility study of the levosulpiride was conducted to select a suitable dissolution media for in vitro drug release studies.Results: Fourier transform infrared (FTIR) study revealed no considerable changes in IR peak of levosulpiride and hence no interaction between drug and the excipients. DSC thermograms showed that no drug interaction occurred during the manufacturing process. In vitro dissolution study was carried out for all the formulation and the results compared with marketed sustained release tablet. The drug release from matrix tablets was found to decrease with increase in polymer ratio of Chitosan, Xanthan gum and Guar gum.Conclusion: Formulation LF3 exhibited almost similar drug release profile in dissolution media as that of marketed tablets. From the results of dissolution data fitted to various drug release kinetic equations, it was observed that highest correlation was found for First order, Higuchi’s and Korsmeyer equation, which indicate that the drug release occurred via diffusion mechanism.  Keywords: Levosulpiride, sustained release tablets, natural polymers, in vitro drug release studies 

scholarly journals FORMULATION AND IN-VITRO EVALUATION OF THEOPHYLLINE HYDROCHLORIDE EFFERVESCENT FLOATING TABLETS: EFFECT OF POLYMER CONCENTRATION ON TABLET BUOYANCY

2019 ◽  
pp. 59-65
Author(s):  
AKPABIO E. I. ◽  
EFFIONG D. E. ◽  
UWAH T. O. ◽  
SUNDAY N. I.
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
Polymer Concentration ◽  
Hydroxypropyl Methylcellulose ◽  
Controlled Drug Release ◽  
Fickian Diffusion ◽  
Wet Granulation ◽  
Floating Tablets ◽  
Swelling Characteristics

Objective: This study was undertaken to formulate a floating drug delivery system of theophylline hydrochloride using different concentrations of a chosen polymer and then investigate how polymer concentration affects buoyancy and drug release properties of the tablets. Methods: Hydroxypropyl methylcellulose (HPMC) at different concentration levels of 15% (F1), 20% (F2) and 30% (F3) was used to form the three formulation batches of floating tablets. Wet granulation method was used for the granule preparation while Sodium bicarbonate and citric acid were used as the gas generating agent. The physical properties of the granules and the floating tablets were evaluated. Also determined were the physicomechanical properties, buoyancy and swelling characteristics of the tablets. The in vitro drug release study was carried out according to the USP I (basket method) for 8h in 900 ml 0.1N HCl at 50 rpm. Samples withdrawn at the regular predetermined time were analyzed spectrophotometrically at a wavelength of 271 nm and data obtained statistically analyzed by one-way analysis of variance (ANOVA). The differences between means were considered significant at P<0.05. Results: The result showed that polymer (HPMC) concentration significantly (p>0.05) increased swelling index and improved floating lag time, it had no significant effect on the total floating time. Percentage drug release at the end of 8 h was 100%, 98.2% and 96.13% for formulation F1, F2 and F3, respectively. All three formulations followed the Higuchi drug release kinetics model and the mechanism of drug release was the non Fickian diffusion with exponents of 0.46, 0.51 and 0.56 for the respective batch. Conclusion: Batch F3 gave a better-controlled drug release and floating properties in comparison to batch F1 and F2 thus Polymer concentration influenced the onset of floating and controlled the release of Theophylline.

scholarly journals Crushed Tablets: Does the Administration of Food Vehicles and Thickened Fluids to Aid Medication Swallowing Alter Drug Release?

2014 ◽  
Vol 17 (2) ◽  
pp. 207 ◽  
Author(s):  
Yady Juliana Manrique-Torres ◽  
Danielle J Lee ◽  
Faiza Islam ◽  
Lisa M Nissen ◽  
Julie A.Y. Cichero ◽  
...  
Keyword(s):  
Drug Release ◽  
Orange Juice ◽  
Immediate Release ◽  
Drug Dissolution ◽  
In Vitro Dissolution ◽  
Simulated Gastric Fluid ◽  
Drug Bioavailability ◽  
Thickening Agents

Purpose. To evaluate the influence of co-administered vehicles on in vitro dissolution in simulated gastric fluid of crushed immediate release tablets as an indicator for potential drug bioavailability compromise. Methods. Release and dissolution of crushed amlodipine, atenolol, carbamazepine and warfarin tablets were tested with six foods and drinks that are frequently used in the clinical setting as mixers for crushed medications (water, orange juice, honey, yoghurt, strawberry jam and water thickened with Easythick powder) in comparison to whole tablets. Five commercial thickening agents (Easythick Advanced, Janbak F, Karicare, Nutilis, Viscaid) at three thickness levels were tested for their effect on the dissolution of crushed atenolol tablets. Results. Atenolol dissolution was unaffected by mixing crushed tablets with thin fluids or food mixers in comparison to whole tablets or crushed tablets in water, but amlodipine was delayed by mixing with jam. Mixing crushed warfarin and carbamazepine tablets with honey, jam or yoghurt caused them to resemble the slow dissolution of whole tablets rather than the faster dissolution of crushed tablets in water or orange juice. Crushing and mixing any of the four medications with thickened water caused a significant delay in dissolution. When tested with atenolol, all types of thickening agents at the greatest thickness significantly restricted dissolution, and products that are primarily based on xanthan gum also delayed dissolution at the intermediate thickness level. Conclusions. Dissolution testing, while simplistic, is a widely used and accepted method for comparing drug release from different formulations as an indicator for in vivo bioavailability. Thickened fluids have the potential to retard drug dissolution when used at the thickest levels. These findings highlight potential clinical implications of the addition of these agents to medications for the purpose of dose delivery and indicate that further investigation of thickened fluids and their potential to influence therapeutic outcomes is warranted. This article is open to POST-PUBLICATION REVIEW. Registered readers (see “For Readers”) may comment by clicking on ABSTRACT on the issue’s contents page.

scholarly journals Formulation and in-vitro evaluation of ciprofloxacin HCL floating matrix tablets

2020 ◽  
Vol 2 (1) ◽  
pp. 01-06
Author(s):  
Dhulipalla Mounika ◽  
I. Deepika Reddy ◽  
K. Sai Chandralekha ◽  
Kapu Harika ◽  
Ramarao Nadendla ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Controlled Release ◽  
Drug Release ◽  
Matrix Tablets ◽  
Fickian Diffusion ◽  
In Vitro Dissolution ◽  
Oral Drug ◽  
Prolonged Release ◽  
Evaluation Parameters

Oral drug delivery is the most widely utilized route of administration among all the routes that have been explored for systemic delivery of drugs via pharmaceutical products of different dosage form. Oral route is considered most natural, uncomplicated, convenient and safe due to its ease of administration, patient acceptance and cost-effective manufacturing process. Gastroretentive drug delivery system was developed in pharmacy field and drug retention for a prolonged time has been achieved. The goal of this study was to formulate and in-vitro evaluate Ciprofloxacin HCl controlled release matrix floating tablets. Ciprofloxacin HCl floating matrix tablets were prepared by wet granulation method using two polymers such as HPMC K100M (hydrophilic polymer) and HPMC K15M. All the Evaluation parameters were within the acceptable limits. FTIR spectral analysis showed that there was no interaction between the drug and polymers. In-vitro dissolution study was carried out using USP dissolution test apparatus (paddle type) at 50 rpm. The test was carried out at 37 ± 0.5 0C in 900ml of the 0.1 N HCl buffer as the medium for eight hours. HPMC K100M shows a prolonged release when compared to HPMC K15M. These findings indicated that HPMC K100M can be used to develop novel gastroretentive controlled release drug delivery systems with the double advantage of controlled drug release at GIT pH. On comparing the major criteria in evaluation such as preformulation and in vitro drug release characteristics, the formulation F8 was selected as the best formulation, as it showed the drug content as 99±0.4% and swelling index ratio was 107.14, and in-vitro drug released 61.31±0.65% up to 8 hours. Results indicated that controlled Ciprofloxacin HCl release was directly proportional to the concentration of HPMC K100M and the release of drug followed non-Fickian diffusion. Based on all the above evaluation parameters it was concluded that the formulation batch F8 was found to be best formulation among the formulations F1 to F8 were prepared.

scholarly journals Formulation and Evaluation of Floating Matrix Tablets of Sacubitril and Valsartan

2019 ◽  
Vol 9 (4-s) ◽  
pp. 298-309
Author(s):  
Sudhakar Pathak ◽  
Harish Pandey ◽  
Sunil Kumar Shah
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Lag Time ◽  
Matrix Tablets ◽  
In Vitro Dissolution ◽  
Potential Candidate ◽  
In Vitro Drug Release ◽  
Gastric Emptying Rate ◽  
Floating Tablets

Floating Drug Delivery Systems (FDDS) have a bulk density lower than gastric fluids and thus remain buoyant in the stomach for a prolonged period of time, without affecting the gastric emptying rate. While the system is floating on the gastric contents, the drug is released slowly at a desired rate from the system. These floating tablets mainly prepared for reduction of lag time and release the drug up to 12 hours and may also increase the bioavailability of the drugs by utilizing the drug to full extent avoiding unnecessary frequency of dosing. The purpose of this research was to develop and evaluated floating matrix tablets of sacubitril and valsartan. The floating matrix tablets of sacubitril and valsartan were prepared by direct compression method using altered concentrations of HPMC K4M, HPMC K100M, sodium alginate as polymers and sodium bicarbonate, citric acid as gas generating agent. FTIR, DSC studies conformed that there was no incompatibility between the polymers and the drug. Tablet preformulation parameters were within the pharmacopoeias limit. Tablets were evaluated by different parameters such as weight uniformity, content uniformity, thickness, hardness, in vitro release studies, buoyancy determination and kinetic analysis of dissolution data. The varying concentration of gas generating agent and polymers was found to affect on in-vitro drug release and floating lag time. Tablet showed ≤ 1min lag time, continuance of buoyancy for >12 h. The in-vitro drug release pattern of sacubitril and valsartan optimized floating tablets (F16) was fitted to different kinetic models which showed highest regression (r2 = 0.9838) for Higuchi model. The Optimized formulation (F16) showed no significant change in physical appearance, drug content, floating lag time, in vitro dissolution studies after 75%±5% RH at 40±20C relative humidity for 6 months.  Prepared floating tablets of sacubitril and valsartan may prove to be a potential candidate for safe and effective controlled drug delivery over an extended period of time for gastro retentive drug delivery system.  

Sign in / Sign up

Export Citation Format

Share Document