scholarly journals Optimization Approach for Improving Energy Efficiency and Evaluation of Greenhouse Gas Emission of Wheat Crop using Data Envelopment Analysis

2019 ◽  
Vol 11 (12) ◽  
pp. 3409 ◽  
Author(s):  
Ilahi ◽  
Wu ◽  
Raza ◽  
Wei ◽  
Imran ◽  
...  

Energy is a major component in enhancing agricultural productivity for the rapidly growing world population. From that fact, a comprehensive analysis of energy inputs and outputs is required to conserve energy for future generations without threatening the food supply. Therefore, this study was performed in wheat production across important cropping zones of Punjab, Pakistan. In this study, the energy use pattern of wheat production was analyzed, and the degrees of technical efficiency of Decision Making Units (DMUs) were examined using Data Envelopment Analysis (DEA). Based on the results of the DEA analysis, the inefficient energy inputs were identified and further explored with the core objective of a significant reduction of excess valuable resources. Data were collected from conducting a face-to-face questionnaire of 200 farmers. The farms for sample were chosen randomly by a stratified normal approach. The results disclosed that the input energy of 34,430.98 MJ ha−1 was used up for wheat production with an output energy of 48,267.05 MJ ha−1. Energy use efficiency, specific energy, energy productivity, and net energy gain in wheat production were calculated as 1.4 MJ kg−1, 9.27 MJ kg−1, 0.10 MJ kg−1 and 13,836.07 MJ kg−1, respectively. The average technical, pure technical, and scale efficiency of DMUs were 0.668, 0.776, and 0.828, respectively, and 0.74% of consulted DMUs were functioning at decreasing returns to scale. Additionally, the significant energy consumption belongs to fertilizer, and diesel fuel, which contribute 65% of the total energy input. If these inputs are applied and managed in line with ours optimize value (29,388.5 MJ ha−1) could save 14.65% resources, which will eventually add the equal quantity in wheat-yield. The total Greenhouse Gas (GHG) emissions were calculated to be 866.43 kg CO2-eq ha−1. In conclusion, the results of the present study suggest that there is sensible capacity for enhancing the energy efficiency of wheat production in Pakistan by accompanying the recommendations for economical energy management, sustainable and efficient use of energy is extremely encouraged.

2015 ◽  
Vol 65 (s2) ◽  
pp. 101-113 ◽  
Author(s):  
Ling Jiang ◽  
Yunyu Jiang ◽  
Zhijun Wu ◽  
Dongsheng Liao ◽  
Runfa Xu

In the era of knowledge economy, a country’s economic competitiveness depends largely on the development level of high-tech industry. This paper evaluates the efficiency of China’s high-tech industry in 31 provinces in 2012 with data envelopment analysis. The empirical results are summarized as following. Firstly, when the effects of exogenous environmental variables are not controlled, the comprehensive technical efficiency of 31 provinces will be overestimated, the pure technical efficiency will be underestimated, and the scale efficiency value will be overestimated. Secondly, after eliminating the environmental impact, the comprehensive technical efficiency of 31 provinces with the average of 0.395 is rather low, due to the low scale efficiency.


2019 ◽  
Vol 2 (2) ◽  
pp. 82-89
Author(s):  
Nor Tasik Misbahrudin

Waqf is a voluntary charity that cannot be disposed of and the ownership cannot be transferred once it is declared as waqf assets. Waqf institutions play an important role in helping the development of Muslims ummah through wealth distribution. State Islamic Religious Councils (SIRCs) in Malaysia are the sole trustee that manage and develop waqf assets. Based on selected input and output, the intermediary approach assumes that cash waqf received as output while total expenditure of SIRCs as input. Under this approach SIRCs act as intermediary between waqif (giver) and beneficiaries. Thus, this paper attempts to analyze the efficiency of waqf institutions in Malaysia by using Data Envelopment Analysis (DEA) method under output-orientation using Variable Return to Scale (VRS) assumptions. Four SIRCs were selected as decision making units (DMU) for the period of 2011 to 2015. The result indicates that changes in average technical efficiency for every year is contributed by both pure technical and scale. However, inefficiency of Malaysian waqf institutions is mostly contributed by pure technical efficiency aspects rather than scale. 2012 showed the highest average technical efficiency with 73.9% as most of the institutions operated in optimum level of input to produce output. Thus, the result suggests that both technical and scale efficiency should be improved to achieve the most efficient and productive level of performance in order to fulfill objectives of the institutions as an intermediary between waqif and beneficiaries.


2011 ◽  
Vol 36 (9) ◽  
pp. 2573-2579 ◽  
Author(s):  
Ali Mohammadi ◽  
Shahin Rafiee ◽  
Seyed Saeid Mohtasebi ◽  
Seyed Hashem Mousavi Avval ◽  
Hamed Rafiee

Energies ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4902
Author(s):  
Biswaranjita Mahapatra ◽  
Chandan Bhar ◽  
Sandeep Mondal

Coal is the primary source of energy in India. Despite being the second-largest coal-producingcountry, there exists a significant difference in demand and production in India. In this study, the relativeefficiency of twenty-eight selected opencast mines from a large public sector undertaking coal companyin India for 2018–2019 was assessed and ranked by using data envelopment analysis (DEA). This studyused input-oriented DEA with efficiency decomposition to pure technical efficiency, technical efficiency,and scale efficiency. The result showed that 25% and 36% of mines were efficient in technical efficiencyand pure technical efficiency, respectively, whereas the eight mines scale efficiency was inefficient witha decreasing return to scale. Further, in this study, theMalmquist Productivity Index (MPI)was employedto measure the efficiency of the selected mines for three consecutive years (2016–2017 to 2018–2019).The result shows that in only three mines the efficiency is continuously improving from 2016–2017 to2018–2019, whereas in more than 20% of mines the efficiency score is decreasing. Comparing theMPIefficiency and productivity assessment throughout the years, changes in innovation and technology areincreasing from 2017–2018 to 2018–2019. Finally, the study concluded with a comprehensive evaluationof each variable with mines performance. The author formulated the strategies, which in turn help coalprofessionals to improve the efficiency of the mine.


2014 ◽  
Vol 46 (1) ◽  
pp. 89-106 ◽  
Author(s):  
K. Bradley Watkins ◽  
Tatjana Hristovska ◽  
Ralph Mazzanti ◽  
Charles E. Wilson ◽  
Lance Schmidt

Data envelopment analysis is used to calculate technical, allocative, economic, and scale efficiencies for fields enrolled in the University of Arkansas Rice Research Verification Program. The results reveal most fields have high technical and scale efficiencies, implying inputs are used in minimum levels necessary to achieve given output levels and fields are close to optimal in size. However, most fields exhibit allocative and economic inefficiencies and do not use inputs in the right combinations necessary to achieve cost minimization. Tobit analysis indicated allocative and economic efficiencies could be improved with better variety selection and better irrigation management.


2016 ◽  
Vol 78 (12-3) ◽  
Author(s):  
Na’imah Ali ◽  
Noor Asiah Ramli ◽  
Faridah Zulkipli

RISDA has targeted for the income of each smallholder to be at least RM2500 per month by the end of 2015. However, approximately almost 90% of the smallholders’ monthly income is still below the target. Hence, in order to observe if this target is achievable, a study was conducted to evaluate the efficiency level of producing rubber among 95 rubber smallholders in Pahang. In addition, the study also investigated if there was any opportunity for increment of production among the rubber smallholders. Therefore, the Data Envelopment Analysis (DEA) model, under the assumption of Variable Return to Scale (VRS) and Constant Return to Scale (CRS), was used to analyse the scale and the technical efficiency of the smallholders. Scale Efficiency was measured in order to estimate the return to scale of the smallholders. As a result, the study found that the average Overall Technical Efficiency (OTE) and Pure Technical Efficiency (PTE) scores of the smallholders were 43.47% and 43.78%, respectively. Thus, the majority of the smallholders were not technically efficient in producing rubber. Furthermore, based on the return to scale estimated, 41% of the smallholders were operating under the Increase Return to Scale (IRS), which implied that the smallholders had a sub-optimal scale size. The results obtained had been useful as the optimal input-output for the efficient rubber yield can be determined and may help RISDA, as well as agricultural planners, to devise a strategy in order to increase the productivity of rubber smallholders in Malaysia.   


Sign in / Sign up

Export Citation Format

Share Document