scholarly journals The Renewable Energy Production Capability of Settlements to Meet Local Electricity and Transport Energy Demands

2021 ◽  
Vol 13 (7) ◽  
pp. 3636
Author(s):  
Balázs Kulcsár ◽  
Tamás Mankovits ◽  
Piroska Gyöngyi Ailer

In addition to the examination of electric power from local renewables, this study has sought the answer to the question of what proportion of vehicles are fueled by environmentally friendly energy saving technologies in the vehicle fleets of Hungarian settlements. Further, the study attempts to shed light on the self-sufficiency of Hungarian settlements with respect to the electricity and transport segments. In our assessments, the performance of small-scale household power plants (SSHPPs) utilizing local renewable energy sources, and small-scale power plants with installed capacities under 0.5 MW, was taken into account, as were the proportions of vehicles operating with partly or completely clean energy sources in the vehicle fleets of the individual settlements. Finally, the composition of the vehicle fleet has been examined in the light of the quantities of renewable electricity generated in the individual settlements, in order to consider whether these settlements are capable of covering the energy needs of their vehicle stocks from local sources. In the light of the results, the changes generated by the incentives and investments introduced over the past ten years can be established and subsequently, the energy policy needs in the future can be assessed. Our study has incorporated energy geography and settlement geography aspects.

Author(s):  
Hasan Dinçer ◽  
Serhat Yüksel ◽  
Hüsne Karakuş

Renewable energy sources are clean energy sources that meet the energy needs in a sustainable way. Therefore, it is necessary to invest in renewable energy sources. However, there are some difficulties in renewable energy investments. It has problems such as high initial installation cost, underdeveloped technological infrastructure, and insufficient financial support. Several financial products are being developed in order to overcome the mentioned difficulties. In this context, the purpose of this study is to explain the role of green sukuk in the financing of renewable energy investments. Depending on this purpose, the study has been examined with a literature review. The production of renewable energy sources can be encouraged with green sukuk. However, green sukuk is an advantage for Islamic companies that want to realize environmental projects. On the other hand, it offers the opportunity to the environmentally friendly Islamic investors to evaluate their savings.


Author(s):  
Troy V. Nguyen ◽  
Aldo Fabregas Ariza ◽  
Nicholas W. Miller ◽  
Ismael Cremer

Airports are key components of the global transportation system and are the subject of continuous sustainability improvements. Promoting clean energy sources and energy-efficient practices can help attain major sustainability goals at airports around the world. Although small airports are greater in number, most of the “sustainability” attention has been given to large airports. Small airports are typically located in rural areas, making them excellent candidates for renewable energy. This paper focuses on the planning and selection of renewable energy systems as a strategic method to reduce energy use and increase electric power reliability at small-scale airport facilities. The target system may use a combination of renewable energy sources to produce electrical power for the on-site facilities. The framework details include methods of energy collection, power production, and energy storage that are environmentally sound. A small airport serving a dual role as a flight training facility was used as case study. In the case study, systems engineering methodology was adapted to the small airport/ renewable energy domain in order to effectively identify stakeholders and elicit user requirements. These, coupled with industrial standards, relevant government regulations, and a priori constraints, are used to derive the initial requirements that serve as the basis for a preliminary design. The proposed framework also contains provisions for an on-site assessment of existing airport energy needs, sources, providers, and location-specific assets and challenges.


Author(s):  
Maria Yalbacheva

The idea of achieving energy security and lowering the dependence on the global hydrocarbon market is at the top of the agenda in many countries. Most of them consider switching from traditional energy sources to renewable ones as one of the ways to reduce fuel import. This concept absolutely conforms to one of the UN Sustainable Development Goals (Goal no. 7, “Affordable and Clean Energy”). In May 2019, the Government of Uzbekistan Republic adopted the law on the Use of Renewable Energy Sources (RES). By 2030, Uzbekistan is going to increase the share of RES in the total structure of electricity generation up to 25 % (currently it is at 10 %), by building solar and wind farms with a total installed capacity of 5,000 MW and 3,000 MW, respectively. The energy-deficient Bostanliq district of the Tashkent region has become one of the places of interest, where transport infrastructure, recreation services, and renewable energy will be developed. The purpose of this study was a multivariate analysis, considering the meteorological, ecological, and socio-economic characteristics of the Bostanliq district, leading to the selection of the optimal location for the wind farm. The assessment map based on the results of this analysis made it possible to identify areas that are most suitable for the location of wind power plants. The assessment method, that was used in this work, is also applicable to other regions of the world.


2013 ◽  
Vol 4 (2) ◽  
Author(s):  
Isak Karabegović ◽  
Vlatko Doleček

Energy security and stability are currently the main issues throughout the world. Applied research is carried out all over the world in order to increase a share of renewable energy sources in the overall task of energy generation. In near future environmentally friendly energy sources should be found that will enable the mankind to cover its energy needs. Renewable energy sources are currently offered worldwide as an environmentally friendly and acceptable solution; however, one may always wonder whether it is realistic to expect such energy sources to be developed at a level sufficient to meet the mankind’s ever increasing energy needs. This caution is caused by the following facts associated with the renewable energy sources available today: the wind energy is not everywhere available in sufficient quantities, solar energy is not sufficiently used, hydropower (we refer to small hydro power plants), is not big enough for this quantity of energy, geothermal energy can be optimally used only at places where thermal energy from the inner core of the Earth is near the surface, tidal energy (energy of the waves) has great potentials but is very little used due to its scarcity and non-accessibility, bioenergy, as a substitute for conventional fossil fuels, is not completely environmentally friendly or acceptable due to the emission of greenhouse gases in the atmosphere. On the other hand, without implementing the adequate policies in the energy sector operation, it is not possible to have any industrial, economic or social progress in the world. Energy security and stability are only one part in achieving the ultimate goals: sustainable economy, clean environment, high standard of living, prosperity and health of the population. In the light of all the above, the paper will investigate the state and perspective of renewable energy sources with a special emphasis on the potential of solar energy.


2021 ◽  
Author(s):  
Sahishnukumar Shah

The small-scale vertical axis wind turbine is designed and modeled in this project, considering all aspects of wind turbine such as Blade design, stator design, rotor design and converter system design. Electric Power has become a prime necessity for any country for economic development. The conventional fuel sources for power generation are depleting fast. The favorable alternatives are renewable energy sources. Although more invention has to be carried out in the field of renewable energy sources, every little effort in this direction may provide a solution to reach most economical power generation point. Hence the same topic was selected for Masters Project. The goal of this project is to design a small scale Vertical Axis Wind Turbine, which is capable of producing electrical power even with low wind velocity. It can be placed on road dividers, sidetracks of train or remote places i.e. villages, military camps, where it is not economical to transmit power from power plants. Implementation of such project would reduce the dependence of an industry or remote houses, on electricity board.


2021 ◽  
Author(s):  
Sahishnukumar Shah

The small-scale vertical axis wind turbine is designed and modeled in this project, considering all aspects of wind turbine such as Blade design, stator design, rotor design and converter system design. Electric Power has become a prime necessity for any country for economic development. The conventional fuel sources for power generation are depleting fast. The favorable alternatives are renewable energy sources. Although more invention has to be carried out in the field of renewable energy sources, every little effort in this direction may provide a solution to reach most economical power generation point. Hence the same topic was selected for Masters Project. The goal of this project is to design a small scale Vertical Axis Wind Turbine, which is capable of producing electrical power even with low wind velocity. It can be placed on road dividers, sidetracks of train or remote places i.e. villages, military camps, where it is not economical to transmit power from power plants. Implementation of such project would reduce the dependence of an industry or remote houses, on electricity board.


Energies ◽  
2019 ◽  
Vol 12 (15) ◽  
pp. 3030 ◽  
Author(s):  
Giovanni M. Casolino ◽  
Arturo Losi

The demand becoming flexible is a requirement for the full exploitation of renewable energy sources. Aggregation may foster the provision of flexibility by small-scale providers connected to distribution grids, since it allows offering significant flexibility volumes to the market. The aggregation of flexibility providers is carried out by the aggregator, a new market role and possibly a new market player. Location information of individual flexibility providers is necessary for both the aggregator and the system operators, in particular, the Distribution System Operator (DSO). For the former, information should allow treating a high number of individual flexibility providers as a single provider to offer significant flexibility volumes to the markets; for the latter, the information should ensure an adequate visibility of the connection of the individual providers to the grid. In the paper, the concept of Load Area (LA) is recalled, which combines the needs of location information of the aggregator and of the DSO. A method for the identification and modeling of LAs for the general case of unbalanced radial systems is proposed. The results of the methods’ application to two studied unbalanced networks are presented, showing the effectiveness and viability of the proposed approach.


2020 ◽  
Vol 1 (2) ◽  
pp. 189-193
Author(s):  
Aisha Naiga ◽  
Loyola Rwabose Karobwa

Over 90% of Uganda's power is generated from renewable sources. Standardised Implementation Agreements and Power Purchase Agreements create a long-term relationship between Generating Companies and the state-owned off-taker guaranteed by Government. The COVID-19 pandemic and measures to curb the spread of the virus have triggered the scrutiny and application of force majeure (FM) clauses in these agreements. This article reviews the FM clauses and considers their relevance. The authors submit that FM clauses are a useful commercial tool for achieving energy justice by ensuring the continuity of the project, despite the dire effects of the pandemic. Proposals are made for practical considerations for a post-COVID-19 future which provides the continued pursuit of policy goals of promoting renewable energy sources and increasing access to clean energy, thus accelerating just energy transitions.


Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3860
Author(s):  
Priyanka Shinde ◽  
Ioannis Boukas ◽  
David Radu ◽  
Miguel Manuel de Manuel de Villena ◽  
Mikael Amelin

In recent years, the vast penetration of renewable energy sources has introduced a large degree of uncertainty into the power system, thus leading to increased trading activity in the continuous intra-day electricity market. In this paper, we propose an agent-based modeling framework to analyze the behavior and the interactions between renewable energy sources, consumers and thermal power plants in the European Continuous Intra-day (CID) market. Additionally, we propose a novel adaptive trading strategy that can be used by the agents that participate in CID market. The agents learn how to adapt their behavior according to the arrival of new information and how to react to changing market conditions by updating their willingness to trade. A comparative analysis was performed to study the behavior of agents when they adopt the proposed strategy as opposed to other benchmark strategies. The effects of unexpected outages and information asymmetry on the market evolution and the market liquidity were also investigated.


Electronics ◽  
2021 ◽  
Vol 10 (15) ◽  
pp. 1779
Author(s):  
Syed Rahman ◽  
Irfan Khan ◽  
Khaliqur Rahman ◽  
Sattam Al Otaibi ◽  
Hend I. Alkhammash ◽  
...  

This paper presents a novel, scalable, and modular multiport power electronic topology for the integration of multiple resources. This converter is not only scalable in terms of the integration of multiple renewable energy resources (RES) and storage devices (SDs) but is also scalable in terms of output ports. Multiple dc outputs of a converter are designed to serve as input to the stacking modules (SMs) of the modular multilevel converter (MMC). The proposed multiport converter is bidirectional in nature and superior in terms of functionality in a way that a modular universal converter is responsible for the integration of multiple RES/SDs and regulates multiple dc output ports for SMs of MMC. All input ports can be easily integrated (and controlled), and output ports also can be controlled independently in response to any load variations. An isolated active half-bridge converter with multiple secondaries acts as a central hub for power processing with multiple renewable energy resources that are integrated at the primary side. To verify the proposed converter, a detailed design of the converter-based system is presented along with the proposed control algorithm for managing power on the individual component level. Additionally, different modes of power management (emulating the availability/variability of renewable energy sources (RES)) are exhibited and analyzed here. Finally, detailed simulation results are presented in detail for the validation of the proposed concepts and design process.


Sign in / Sign up

Export Citation Format

Share Document